Uncontrolled Resource Consumption

RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0.Show less

RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, get_chunk_selector/1 calls binary_to_atom on the raw client-supplied <<"chunk_selector">> property from post-auth subscribe and resolve_offset_spec frames, with no whitelist and no existing guard. An authenticated stream client with read access to any stream can crash the broker node. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol user with read access to at least one stream. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.Show less

RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, rabbit_pid_codec:decompose_from_binary/1 parses a caller-supplied ETF-encoded binary and calls binary_to_atom(Node, utf8) on the node-name field. It is reached from rabbit_volatile_queue:pid_from_name/2, which is invoked for any queue name / routing key beginning amq.rabbitmq.reply-to.. The CandidateNodes membership check happens after the atom is created, and the surrounding try/catch cannot reclaim atoms (they are never GC'd). binary_to_existing_atom is not used. Any authenticated AMQP client can crash the entire Erlang VM (all vhosts, all connections) with ~1M cheap requests. Preconditions include Authenticated AMQP 0-9-1 connection to any vhost No per-connection rate limit low enough to make ~1M operations infeasible. This issue is fixed in versions 4.2.7 and 4.3.1.Show less

A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed.Show less

Jawn is an open source JSON parser. Prior to 1.7.0, Jawn's AsyncParser can perform quadratic work when a single JSON token is delivered across many small chunks because each absorb call rescans the incomplete token from the start. A remote attacker who controls untrusted JSON input and its chunk sizes can exhaust CPU resources and cause denial of service in applications using AsyncParser. This issue is fixed in version 1.7.0.Show less

Missing upper bound on the key derivation iteration count accepted during SCRAM authentication to a backend server in PgBouncer through 1.25.2 allows a malicious or compromised PostgreSQL backend to cause uncontrolled CPU consumption in PgBouncer. The resulting key derivation cannot be interrupted in frontend builds such as PgBouncer. Because PgBouncer serves all clients from a single process, one backend can in this way stop it from serving traffic for every other database and client it is pooling, so the failure of a single backend is not contained.Show less

Uncontrolled Resource Consumption vulnerability in Apache Tomcat during sending of WebSocket close message enabled a DoS attack. This issue affects Apache Tomcat: from 11.0.0-M5 through 11.0.25, from 10.1.8 through 10.1.59, from 9.0.74 through 9.0.121. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.88 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue.Show less

The WP Recipe Maker WordPress plugin before 10.8.2 does not have any authorisation check in one of its REST routes, nor does it bound what that route stores, allowing unauthenticated users to write unlimited data into any user's metadata and to permanently prevent that account, including an administrator's, from loading.Show less

The divi-dash WordPress plugin before 1.0.7 does not validate the source of the client IP address it uses for rate limiting and banning, allowing unauthenticated attackers to spoof arbitrary IP addresses in order to bypass rate limiting, ban chosen addresses from the feature, and grow a stored option without bound, resulting in denial of service.Show less

Forward-reference completion for @JsonIdentityInfo object IDs in FasterXML jackson-databind performs a linear scan of the pending-reference accumulator for every resolved ID. The affected paths are CollectionDeserializer.CollectionReferringAccumulator.resolveForwardReference() and the equivalent implementation in MapDeserializer. When a document first creates N unresolved object-ID references in an identity-enabled collection or map and then defines those same IDs in reverse order, completion performs on the order of N * (N + 1) / 2 identity comparisons, so a shallow document whose size grows linearly causes quadratic CPU work during deserialization. The reporter instrumented equals() calls on the ID class and measured exactly 2,003,000 comparisons at N = 2,000, against zero comparisons in the pending-reference lookup path for an equally sized control in which every reference was already resolved. The input requires no deep nesting and no syntactically unusual JSON. Exploitation requires an application that deserializes attacker-influenced JSON into an identity-enabled collection or map. The fix replaces the repeated linear lookup with a keyed pending-reference structure.Show less

TypeDeserializerBase._findDeserializer() in FasterXML jackson-databind caches the resolved deserializer under the raw, attacker-supplied type ID. When name-based polymorphism is configured with a fallback, for example @JsonTypeInfo(use = Id.NAME, defaultImpl = ...), every distinct unrecognized type ID resolves to the same fallback deserializer but is retained as its own key in the _deserializers map. That map has no configurable bound and lives for the lifetime of the type deserializer, so an attacker who can repeatedly supply fresh unknown type IDs causes monotonic memory retention across requests. The reporter observed 10,000 retained entries from 10,000 distinct unknown IDs, against a single entry for a control that repeated one unknown ID the same number of times, isolating attacker-controlled key cardinality from request volume. Exploitation requires an application that enables name-based polymorphism with a defaultImpl or equivalent fallback, accepts attacker-influenced type IDs, and reuses a long-lived ObjectMapper across requests. The fix stops caching fallback resolutions for unrecognized IDs and bounds both the number of cached entries and the length of a cacheable type ID.Show less

UTF8DataInputJsonParser._reportInvalidToken() in FasterXML jackson-core builds the offending-token text for its error message by appending Java identifier characters to a StringBuilder in a loop that has no upper bound. Unlike the three sibling parser implementations, including UTF8StreamJsonParser, it never consults ErrorReportConfiguration.getMaxErrorTokenLength() (default 256). A malformed token supplied to a parser created through JsonFactory.createParser(DataInput) is therefore accumulated in full. No StreamReadConstraints setting mitigates this: maxDocumentLength cannot be applied to DataInput sources at all, and maxStringLength does not cover this path because the accumulation bypasses ReadConstrainedTextBuffer. The reporter measured a 20,000,109-character exception message from a 20-million-character malformed token on the DataInput path, against 367 characters for identical input on the InputStream path. Scaling the payload drives the StringBuilder, which also incurs byte-to-char expansion and internal array doubling, to many times the raw payload size and can trigger OutOfMemoryError for the whole JVM. UTF8DataInputJsonParser was introduced in 2.8.0 together with createParser(DataInput); releases before 2.8.0 do not contain the affected class.Show less

plone.app.dexterity is a content-type system for the Plone content management system, and plone.app.contenttypes provides Plone’s Dexterity-based content types. Plone.app.dexterity versions through 3.2.2, 4.0.0 through 4.1.2, and 5.0.0, and plone.app.contenttypes versions through 3.0.11, 4.0.0 through 4.0.9, and 5.0.0 are vulnerable to denial of service because an authenticated user can create content with excessively long titles, descriptions, or uploaded-file names, causing Plone to become unresponsive and potentially making the resulting content difficult to edit or delete. The vulnerability is patched in plone.app.dexterity versions 3.2.3, 4.1.3, and 5.0.1, and in plone.app.contenttypes versions 3.0.12, 4.0.10, and 5.0.1.Show less

icalendar is an RFC 5545 compatible parser and generator of iCalendar files for Python. From 6.1.0 until 7.2.2, vInt.from_ical accepts an attacker-controlled VALARM REPEAT value and applications that request alarm times can eagerly expand it without an application-level limit. Alarms.times and Alarms.active reach the unbounded expansion in versions starting with 6.1.0, while Alarm.triggers adds a second affected path starting with 7.0.0. Parsing alone does not trigger the issue, but accessing these properties can consume excessive CPU time and heap memory and terminate or stall a service. This issue is fixed in version 7.2.2.Show less

CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction.Show less

Netdata is an open source observability tool. Prior to 2.10.4, an authenticated child agent can send an oversized CHART SLOT value that str2ull_encoded passes to pluginsd_rrdset_cache_put_to_slot in src/plugins.d/pluginsd_internals.h. The accepted slot drives reallocz to request an approximately 16 GiB chart-pointer array, and allocation failure invokes fatal and aborts the parent Netdata agent, repeatedly disabling centralized monitoring while stream access persists. This issue is fixed in version 2.10.4 and nightly build 2.10.0-782-nightly.Show less

A flaw was found in rpcbind. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a large number of unique requests. The rpcbind service records previously unseen RPC (Remote Procedure Call) statistics in unbounded in-memory lists, leading to persistent memory growth and increased CPU usage. This can degrade or exhaust service availability.Show less

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0.Show less

NumberInput.looksLikeValidNumber() in FasterXML jackson-core pre-validates "stringified numbers" with two regular expressions: PATTERN_FLOAT ([+-]?[0-9]*[\.]?[0-9]+([eE][+-]?[0-9]+)?), present since 2.17.0, and PATTERN_FLOAT_TRAILING_DOT, added in 2.17.2. PATTERN_FLOAT places adjacent quantifiers over the same character class -- an optional [0-9]* run, an optional dot, then a required [0-9]+ run -- so input that ultimately fails to match forces Java's backtracking engine to retry every possible split point of the digit run.  Matching cost therefore grows with the square of the input length.  An attacker who can supply JSON that an application deserializes into a numeric target type reaches this method through jackson-databind's default String-to-number coercion (StdDeserializer and NumberDeserializers for BigDecimal, BigInteger, Double and Float).  Because StreamReadConstraints.maxStringLength defaults to 20,000,000 characters, no constraint bounds the input before it reaches the regex.  Testing by the reporter confirmed O(n^2) growth across five consecutive input-size doublings, with a single 160,000-character string consuming roughly 74 seconds in one call; a small number of concurrent requests of ordinary body size can therefore exhaust a server's request-handling thread pool.  The affected method does not exist before 2.17.0, so 2.16.x and earlier releases are not affected.  The fix replaces both regular expressions with a hand-rolled single-pass scan.Show less