Uncontrolled Resource Consumption

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the Cloud Stream server and the Edge Stream server reads the entire message into memory without imposing a limit on the size of this message. An attacker can exploit this by sending a large message to exhaust memory and cause a DoS. The Cloud Stream server and the Edge Stream server are under DoS attack in this case. The consequence of the exhaustion is that the CloudCore and EdgeCore will be in a denial of service. Only an authenticated user can cause this issue. It will be affected only when users enable `cloudStream` module in the config file `cloudcore.yaml` and enable `edgeStream` module in the config file `edgecore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable cloudStream module in the config file `cloudcore.yaml` and disable edgeStream module in the config file `edgecore.yaml`.Show less

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the CloudCore Router does not impose a limit on the size of responses to requests made by the REST handler. An attacker could use this weakness to make a request that will return an HTTP response with a large body and cause DoS of CloudCore. In the HTTP Handler API, the rest handler makes a request to a pre-specified handle. The handle will return an HTTP response that is then read into memory. The consequence of the exhaustion is that CloudCore will be in a denial of service. Only an authenticated user of the cloud can make an attack. It will be affected only when users enable `router` module in the config file `cloudcore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the router switch in the config file `cloudcore.yaml`.Show less

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, EdgeCore may be susceptible to a DoS attack on CloudHub if an attacker was to send a well-crafted HTTP request to `/edge.crt`. If an attacker can send a well-crafted HTTP request to CloudHub, and that request has a very large body, that request can crash the HTTP service through a memory exhaustion vector. The request body is being read into memory, and a body that is larger than the available memory can lead to a successful attack. Because the request would have to make it through authorization, only authorized users may perform this attack. The consequence of the exhaustion is that CloudHub will be in denial of service. KubeEdge is affected only when users enable the CloudHub module in the file `cloudcore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the CloudHub switch in the config file `cloudcore.yaml`.Show less

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, several endpoints in the Cloud AdmissionController may be susceptible to a DoS attack if an HTTP request containing a very large Body is sent to it. The consequence of the exhaustion is that the Cloud AdmissionController will be in denial of service. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. There is currently no known workaround.Show less

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the ServiceBus server on the edge side may be susceptible to a DoS attack if an HTTP request containing a very large Body is sent to it. It is possible for the node to be exhausted of memory. The consequence of the exhaustion is that other services on the node, e.g. other containers, will be unable to allocate memory and thus causing a denial of service. Malicious apps accidentally pulled by users on the host and have the access to send HTTP requests to localhost may make an attack. It will be affected only when users enable the `ServiceBus` module in the config file `edgecore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the `ServiceBus` module in the config file `edgecore.yaml`.Show less

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect handling of multiple simultaneous device registrations on Cisco SSM On-Prem. An attacker could exploit this vulnerability by sending multiple device registration requests to Cisco SSM On-Prem. A successful exploit could allow the attacker to cause a DoS condition on an affected device.Show less

moment is a JavaScript date library for parsing, validating, manipulating, and formatting dates. Affected versions of moment were found to use an inefficient parsing algorithm. Specifically using string-to-date parsing in moment (more specifically rfc2822 parsing, which is tried by default) has quadratic (N^2) complexity on specific inputs. Users may notice a noticeable slowdown is observed with inputs above 10k characters. Users who pass user-provided strings without sanity length checks to moment constructor are vulnerable to (Re)DoS attacks. The problem is patched in 2.29.4, the patch can be applied to all affected versions with minimal tweaking. Users are advised to upgrade. Users unable to upgrade should consider limiting date lengths accepted from user input.Show less

quic-go through 0.27.0 allows remote attackers to cause a denial of service (CPU consumption) via a Slowloris variant in which incomplete QUIC or HTTP/3 requests are sent. This occurs because mtu_discoverer.go misparses the MTU Discovery service and consequently overflows the probe timer. NOTE: the vendor's position is that this behavior should not be listed as a vulnerability on the CVE ListShow less

The simplepush server iterates through the application installations and pushes a notification to the server provided by deviceToken. But this is user controlled. If a bogus applications is registered with bad deviceTokens, one can generate endless exceptions when those endpoints can't be reached or can slow the server down by purposefully wasting it's time with slow endpoints. Similarly, one can provide whatever HTTP end point they want. This turns the server into a DDOS vector or an anonymizer for the posting of malware and so on.Show less

RSSHub is an open source, extensible RSS feed generator. In commits prior to 5c4177441417 passing some special values to the `filter` and `filterout` parameters can cause an abnormally high CPU. This results in an impact on the performance of the servers and RSSHub services which may lead to a denial of service. This issue has been fixed in commit 5c4177441417 and all users are advised to upgrade. There are no known workarounds for this issue.Show less

The Security Team noticed that the termination condition of the for loop in the readExternal method is a controllable variable, which, if tampered with, may lead to CPU exhaustion. As a fix, we added an upper bound and termination condition in the read and write logic. We classify it as a "low-priority but useful improvement". SystemDS is a distributed system and needs to serialize/deserialize data but in many code paths (e.g., on Spark broadcast/shuffle or writing to sequence files) the byte stream is anyway protected by additional CRC fingerprints. In this particular case though, the number of decoders is upper-bounded by twice the number of columns, which means an attacker would need to modify two entries in the byte stream in a consistent manner. By adding these checks robustness was strictly improved with almost zero overhead. These code changes are available in versions higher than 2.2.1.Show less

Argo CD is a declarative continuous deployment for Kubernetes. Argo CD versions v0.7.0 and later are vulnerable to an uncontrolled memory consumption bug, allowing an authorized malicious user to crash the repo-server service, resulting in a Denial of Service. The attacker must be an authenticated Argo CD user authorized to deploy Applications from a repository which contains (or can be made to contain) a large file. The fix for this vulnerability is available in versions 2.3.5, 2.2.10, 2.1.16, and later. There are no known workarounds. Users are recommended to upgrade.Show less

In CODESYS Gateway Server V2 an insufficient check for the activity of TCP client connections allows an unauthenticated attacker to consume all available TCP connections and prevent legitimate users or clients from establishing a new connection to the CODESYS Gateway Server V2. Existing connections are not affected and therefore remain intact.Show less

The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.Show less

Argo Events is an event-driven workflow automation framework for Kubernetes. Prior to version 1.7.1, several `HandleRoute` endpoints make use of the deprecated `ioutil.ReadAll()`. `ioutil.ReadAll()` reads all the data into memory. As such, an attacker who sends a large request to the Argo Events server will be able to crash it and cause denial of service. A patch for this vulnerability has been released in Argo Events version 1.7.1.Show less

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.Show less