Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')

The UpdateHub management subsystem (subsys/mgmt/updatehub/updatehub.c) drives every update operation through a single file-scope ctx structure that holds the CoAP block context, payload buffer, status code, socket, and a one-element poll-fd array fds[1]. Access to ctx was not serialized, and prepare_fds() wrote ctx.fds[ctx.nfds] and incremented ctx.nfds with no bounds check. Two independent paths mutate ctx concurrently: the background autohandler running on the system workqueue, and user-triggered operations reached through the updatehub run shell command, direct API calls, or — since the operations are exposed as syscalls — userspace threads. When a second flow enters prepare_fds() while ctx.nfds is already 1, the write lands one element past the array; by struct layout it overlaps the adjacent ctx.sock/ctx.nfds members. More broadly, the unsynchronized sharing lets two flows interleave connection setup and teardown, double-closing a socket descriptor or scribbling the shared buffers. The result is corruption of the update subsystem's internal state and denial of service of the firmware-update path; the out-of-bounds write is contained within the ctx structure and there is no demonstrated path to memory outside it or to code execution. Triggering requires a local actor able to invoke update operations (or, with CONFIG_USERSPACE, an unprivileged userspace thread) and to win a timing race against the background handler; remote peers cannot control the race timing. The fix serializes the entry points with a mutex and adds a bounds check to prepare_fds().Show less

OP-TEE OS through 4.10.0, fixed in commit 8794043, contains a use-after-free vulnerability in the Trusted Application loader that allows attackers with the ability to load a signed Trusted Application to corrupt secure-world kernel memory by setting the TA_FLAG_CONCURRENT flag in a user TA signed header. Attackers can cause two concurrent sessions to operate on the same shared context without locking, corrupting the uctx->vm_info.regions list during memref parameter mapping and unmapping to free vm_region nodes still in use, resulting in a use-after-free in S-EL1 secure-world kernel memory.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb)Show less

In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not re-register the hook if device unregister already detached the socket.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queued commands have completed" contract in a multi-CPU scenario: CPU2: queue inv-B => need_sync = true CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N) CPU2: read need_sync == false => return 0 (no wait!) CPU2 returns without waiting for any sequence number even though its inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not been signaled). CPU2 then proceeds to, for example, free page-table pages while the IOMMU can still walk stale translations, opening a use-after-free window. This is a logical race in the meaning of the flag, not a memory-visibility issue, so barriers alone do not help. Fix it without losing the optimization of avoiding redundant CWAIT commands: take iommu->lock before testing need_sync, and when it is false do not return early but wait for the last allocated sequence number (cmd_sem_val). Since need_sync == false implies no sync command was queued after the last CWAIT, that CWAIT is FIFO-ordered after every not-yet-completed command, so waiting for its sequence number guarantees all prior commands (possibly queued by another CPU) have completed. The common path with pending work is unchanged and no extra hardware command is issued.Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_is_known_peer(). The old lockless pre-check in tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer could both find it absent and add it twice. cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add() and add a peer after cleanup_bearer() has already emptied the list, leaking that entry when the bearer is freed. Mark the bearer disabled under rcast_lock once the list is emptied and refuse further additions.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix context pstate override handling There are several problems in the context pstate handling code. The most serious ones are potential use-after-free and NULL pointer dereferences at context initialization time. Both are due amdgpu_ctx_init() not holding the adev->pm.stable_pstate_ctx_lock, which is otherwise used from both sysfs and the context code itself for modifying and clearing the stored context pointer. Second issue is that context fini can trample over the pstate configuration set via sysfs. This is due the restore state (ctx->stable_pstate) being saved at context init time, and not if, or when the context actually changes the pstate. As the context exits it will therefore incorrectly restore to what was set before the sysfs override was requested. The simplest fix is to drastically simplify how the state is tracked, by clearly defining the points at which pstate ownership is taken and released, and to handle all transitions under the correct lock. Instead of at context init time, the previous state is saved only at the point the context overrides the current state, and is restored on context exit only if the context is still the owner of the current override state. (cherry picked from commit 1b5e413713c0a93bc1818394d0ce49aaad21bd27)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid() The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem. Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from amdgpu_vm.c and making the relevant code inline to hold the lock while it is still in use. (cherry picked from commit 9d01579f3f868b333acc901815972685989092c7)Show less