Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_ref race between scrub and refill paths The io_zcrx_put_niov_uref() function uses a non-atomic check-then-decrement pattern (atomic_read followed by separate atomic_dec) to manipulate user_refs. This is serialized against other callers by rq_lock, but io_zcrx_scrub() modifies the same counter with atomic_xchg() WITHOUT holding rq_lock. On SMP systems, the following race exists: CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock) put_niov_uref: atomic_read(uref) - 1 // window opens atomic_xchg(uref, 0) - 1 return_niov_freelist(niov) [PUSH #1] // window closes atomic_dec(uref) - wraps to -1 returns true return_niov(niov) return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE] The same niov is pushed to the freelist twice, causing free_count to exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds write (a u32 value) past the kvmalloc'd freelist array into the adjacent slab object. Fix this by replacing the non-atomic read-then-dec in io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically tests and decrements user_refs. This makes the operation safe against concurrent atomic_xchg from scrub without requiring scrub to acquire rq_lock. [pavel: removed a warning and a comment]Show less

In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since the introduction of driver_set_override, the comments in include/linux/rpmsg.h have stated that this helper must be used to set or clear driver_override, but the implementation was not updated until now. Because driver_set_override modifies and frees the string while holding the device_lock, the new driver_override_show now correctly holds the device_lock during the read operation to prevent the race. Additionally, since rpmsg_string_attr has only ever been used for driver_override, removing the macro simplifies the code.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock.Show less

A vulnerability has been found in chatchat-space Langchain-Chatchat up to 0.3.1.3. Impacted is the function files of the file libs/chatchat-server/chatchat/server/api_server/openai_routes.py of the component OpenAI-Compatible File Upload API. Such manipulation of the argument file.filename leads to time-of-check time-of-use. Access to the local network is required for this attack to succeed. The attack requires a high level of complexity. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.Show less

A vulnerability has been found in PrefectHQ prefect up to 3.6.28.dev1. Affected by this vulnerability is the function validate_restricted_url of the component Webhook/Notification. The manipulation leads to time-of-check time-of-use. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 3.6.28.dev2 addresses this issue. The identifier of the patch is 7c70ac54a5e101431d83b9f2681ec88d5e0021ed. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: fix race conditions in sco_sock_connect() sco_sock_connect() checks sk_state and sk_type without holding the socket lock. Two concurrent connect() syscalls on the same socket can both pass the check and enter sco_connect(), leading to use-after-free. The buggy scenario involves three participants and was confirmed with additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlock Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to BT_CONNECT. Subsequent cleanup triggers double sock_put() and use-after-free. Meanwhile conn1 is leaked as it was orphaned when sco_conn_del() cleared the association. Fix this by: - Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts - Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it - Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks - Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections - Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaksShow less

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() crashes while holding the dev->lock, the thread running gether_disconnect() fails to acquire the same lock and spins forever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50 The root cause is that the clearing of dev->port_usb in gether_disconnect() is delayed until the end of the function. Move the clearing of dev->port_usb to the very beginning of gether_disconnect() while holding dev->lock. This cuts off the link immediately, ensuring eth_stop() will see dev->port_usb as NULL and safely bail out.Show less

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd() In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points directly into the mmap'd TX ring buffer shared with userspace. The kernel validates the header via __packet_snd_vnet_parse() but then re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent userspace thread can modify the vnet_hdr fields between validation and use, bypassing all safety checks. The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr to a stack-local variable. All other vnet_hdr consumers in the kernel (tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX path is the only caller of virtio_net_hdr_to_skb() that reads directly from user-controlled shared memory. Fix this by copying vnet_hdr from the mmap'd ring buffer to a stack-local variable before validation and use, consistent with the approach used in packet_snd() and all other callers.Show less

Wazuh is a free and open source platform used for threat prevention, detection, and response. From version 4.0.0 to before version 4.14.4, Wazuh's server API brute-force protection for POST /security/user/authenticate can be bypassed by sending concurrent authentication requests. Although the configured threshold (max_login_attempts, default 50) is enforced correctly for sequential requests, a parallel burst allows significantly more failed login attempts to be processed before the IP block is applied. This enables an attacker to perform more password guesses than the configured policy intends (e.g., 100 attempts processed where 50 should be allowed). This issue has been patched in version 4.14.4.Show less

Race in MHTML in Google Chrome prior to 147.0.7727.138 allowed an attacker who convinced a user to install a malicious extension to leak cross-origin data via a crafted Chrome Extension. (Chromium security severity: High)Show less

OpenClaw before 2026.4.4 contains a race condition vulnerability in shared-secret authentication that allows concurrent asynchronous requests to bypass the per-key rate-limit budget. Attackers can exploit this by sending multiple simultaneous authentication attempts to circumvent intended rate-limiting protections on Tailscale-capable paths.Show less

Successful exploitation of the race condition vulnerability could allow an attacker to trigger a kernel heap overflow, potentially leading to local privilege escalation and granting system-level access to the affected software.Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: designware: amdisp: Fix resume-probe race condition issue Identified resume-probe race condition in kernel v7.0 with the commit 38fa29b01a6a ("i2c: designware: Combine the init functions"),but this issue existed from the beginning though not detected. The amdisp i2c device requires ISP to be in power-on state for probe to succeed. To meet this requirement, this device is added to genpd to control ISP power using runtime PM. The pm_runtime_get_sync() called before i2c_dw_probe() triggers PM resume, which powers on ISP and also invokes the amdisp i2c runtime resume before the probe completes resulting in this race condition and a NULL dereferencing issue in v7.0 Fix this race condition by using the genpd APIs directly during probe: - Call dev_pm_genpd_resume() to Power ON ISP before probe - Call dev_pm_genpd_suspend() to Power OFF ISP after probe - Set the device to suspended state with pm_runtime_set_suspended() - Enable runtime PM only after the device is fully initializedShow less

In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix folio isn't locked in softleaf_to_folio() On arm64 server, we found folio that get from migration entry isn't locked in softleaf_to_folio(). This issue triggers when mTHP splitting and zap_nonpresent_ptes() races, and the root cause is lack of memory barrier in softleaf_to_folio(). The race is as follows: CPU0 CPU1 deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pages In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages are visible before the tail page becomes non-compound. smp_wmb() should be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a result, if zap_nonpresent_ptes() accesses migration entry that stores tail pfn, softleaf_to_folio() may see the updated compound_head of tail page before page->flags. This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio() because of the race between folio split and zap_nonpresent_ptes() leading to a folio incorrectly undergoing modification without a folio lock being held. This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further swapops predicates"), which in merged in v6.19-rc1. To fix it, add missing smp_rmb() if the softleaf entry is migration entry in softleaf_to_folio() and softleaf_to_page(). [tujinjiang@huawei.com: update function name and comments]Show less

In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock().Show less

OwnTone Server versions 28.4 through 29.0 contain a race condition vulnerability in the DAAP login handler that allows unauthenticated attackers to crash the server by exploiting unsynchronized access to the global DAAP session list. Attackers can flood the DAAP /login endpoint with concurrent requests to trigger a remote denial of service condition without requiring authentication.Show less