Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')

Traefik 2.11.x before 2.11.58 and 3.x before 3.7.14 contains a race condition in NTLM and Kerberos (Negotiate) backend authentication, where the per-connection sticky round tripper slot is read and written without synchronization. Remote attackers can send concurrent HTTP/2 or HTTP/3 requests over one connection to orphan backend connections, break connection-bound authentication, or crash Traefik.Show less

The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region.Show less

The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.Show less

Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.Show less

A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3505Show less

A security flaw has been discovered in a2aproject a2a-rs up to 0.4.4. The affected element is the function InMemoryTaskStore::update of the file a2a-server/src/task_store/inmemory.rs. The manipulation results in race condition. The attack may be performed from remote. The patch is identified as 7050c7d329238539424ee46440e23b91c4825bee. It is advisable to implement a patch to correct this issue.Show less

Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users. This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue.Show less

Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Camel PQC component. This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1. The producer held a single java.security.Signature instance and used it for every exchange without synchronizing access. Signature is stateful and is not thread safe: update() accumulates the data to be signed or verified, and verify() consumes that accumulated state. With concurrent exchanges sharing one instance the update and verify calls of different messages interleave, so a verification can complete against data that belongs to another exchange, or against a partially accumulated buffer. The outcome is non-deterministic and includes a verification reporting success for a message whose signature was never actually checked, which defeats the guarantee the component exists to provide. Reaching it requires concurrent traffic through the same endpoint, which is the ordinary condition for a Camel route under load. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The Signature instance is no longer shared across concurrent exchanges. For deployments that cannot upgrade immediately, restrict the affected route to a single concurrent consumer so that no two exchanges use the instance at once.Show less

Wheels 3.0.0 through 4.1.1 can disclose detailed exceptions when allowIPBasedDebugAccess=true (disabled by default). An allowed administrator request changes error/debug-display settings in shared application scope. If it overlaps with an unauthorized client's request that raises an error, that client can receive full exception details, including tag context or a serialized exception, and any sensitive data they contain. This race does not bypass the production gate protecting developer tools. This is fixed in 4.1.2.Show less

The framebuffer device model's maximum resolution constants were duplicated between the framebuffer and RFB modules and had gotten out of sync. Additionally, writes to the framebuffer BAR could set arbitrary width and height values without validation, and the framebuffer BAR I/O and RFB rendering threads were not synchronized. A malicious guest can crash the bhyve process or potentially execute arbitrary code in the host userspace context running the virtual machine, subject to bhyve's Capsicum sandbox.Show less

The HDA audio device model did not check for zero-length Buffer Descriptor List (BDL) entries when starting a stream. A zero-length entry caused an out-of-bounds read or write during DMA transfer processing. BDL fields were also subject to modification by the guest after validation. A malicious guest can crash the bhyve process or potentially execute arbitrary code in the host userspace context running the virtual machine, subject to bhyve's Capsicum sandbox.Show less

The xHCI (USB 3) device model did not validate or save the event ring size provided by the guest. The size was re-read from guest memory on each use, and Transfer Request Block (TRB) fields were loaded without protection against concurrent modification by the guest. This race condition could be triggered by a guest running malicious, privileged code. A malicious guest can crash the bhyve process or potentially execute arbitrary code in the host userspace context running the virtual machine, subject to bhyve's Capsicum sandbox.Show less

kqueue_fork_copy_knote() indexed into the child's file descriptor table using a knote's file descriptor number without a bounds check. Because the child's table is copied before knotes are transferred, a concurrent thread in the parent could grow the parent's table and register knotes with file descriptor numbers beyond the end of the child's table, causing an out-of-bounds read. An unprivileged local user may be able to exploit these races to escalate privileges.Show less

When copying knotes from a parent kqueue to a child, the copy code did not correctly exclude marker knotes (used internally to track list traversal position) before marking them as in-flux and releasing the kqueue lock. If another thread freed a marker while the lock was dropped, the subsequent in-flux decrement operated on freed memory. An unprivileged local user may be able to exploit these races to escalate privileges.Show less

Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From 2.2.7 until 2.2.11, ServiceSentinel.worker in service/singleton/servicesentinel.go checked an owned service under servicesLock and later dereferenced pointer-valued serviceStatusToday and serviceCurrentStatusData entries under serviceResponseDataStoreLock without revalidating that ServiceSentinel.Delete had not removed them. A RoleMember could concurrently report TCP or ICMP results through the member's own agent and delete the same owned service, causing a nil pointer dereference. Because the gRPC server had no recovery interceptor, the worker panic terminated the whole dashboard process and disrupted every tenant's web interface, REST API, and agent connections. The issue affects availability only and does not disclose or modify data. This issue is fixed in versions 2.2.11 and 2.3.0.Show less