Improper Verification of Cryptographic Signature

An issue was discovered in D-Bus before 1.12.24, 1.13.x and 1.14.x before 1.14.4, and 1.15.x before 1.15.2. An authenticated attacker can cause dbus-daemon and other programs that use libdbus to crash when receiving a message with certain invalid type signatures.Show less

syslabs/sif is the Singularity Image Format (SIF) reference implementation. In versions prior to 2.8.1the `github.com/sylabs/sif/v2/pkg/integrity` package did not verify that the hash algorithm(s) used are cryptographically secure when verifying digital signatures. A patch is available in version >= v2.8.1 of the module. Users are encouraged to upgrade. Users unable to upgrade may independently validate that the hash algorithm(s) used for metadata digest(s) and signature hash are cryptographically secure.Show less

Cosign is a project under the sigstore organization which aims to make signatures invisible infrastructure. In versions prior to 1.12.0 a number of vulnerabilities have been found in cosign verify-blob, where Cosign would successfully verify an artifact when verification should have failed. First a cosign bundle can be crafted to successfully verify a blob even if the embedded rekorBundle does not reference the given signature. Second, when providing identity flags, the email and issuer of a certificate is not checked when verifying a Rekor bundle, and the GitHub Actions identity is never checked. Third, providing an invalid Rekor bundle without the experimental flag results in a successful verification. And fourth an invalid transparency log entry will result in immediate success for verification. Details and examples of these issues can be seen in the GHSA-8gw7-4j42-w388 advisory linked. Users are advised to upgrade to 1.12.0. There are no known workarounds for these issues.Show less

Dendrite is a Matrix homeserver written in Go. In affected versions events retrieved from a remote homeserver using the `/get_missing_events` path did not have their signatures verified correctly. This could potentially allow a remote homeserver to provide invalid/modified events to Dendrite via this endpoint. Note that this does not apply to events retrieved through other endpoints (e.g. `/event`, `/state`) as they have been correctly verified. Homeservers that have federation disabled are not vulnerable. The problem has been fixed in Dendrite 0.9.8. Users are advised to upgrade. There are no known workarounds for this issue.Show less

Possible authentication bypass due to improper order of signature verification and hashing in the signature verification call in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon WearablesShow less

Possible authentication bypass due to improper order of signature verification and hashing in the signature verification call in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon WearablesShow less

Foxit PDF Reader before 11.1 and PDF Editor before 11.1, and PhantomPDF before 10.1.6, mishandle hidden and incremental data in signed documents. An attacker can write to an arbitrary file, and display controlled contents, during signature verification.Show less

There is a flaw in RPM's signature functionality. OpenPGP subkeys are associated with a primary key via a "binding signature." RPM does not check the binding signature of subkeys prior to importing them. If an attacker is able to add or socially engineer another party to add a malicious subkey to a legitimate public key, RPM could wrongly trust a malicious signature. The greatest impact of this flaw is to data integrity. To exploit this flaw, an attacker must either compromise an RPM repository or convince an administrator to install an untrusted RPM or public key. It is strongly recommended to only use RPMs and public keys from trusted sources.Show less

Emerson Electric's Proficy Machine Edition Version 9.00 and prior is vulenrable to CWE-347 Improper Verification of Cryptographic Signature, and does not properly verify compiled logic (PDT files) and data blocks data (BLD/BLK files).Show less

Zoom Rooms for Conference Rooms for Windows versions before 5.11.0 are susceptible to a Local Privilege Escalation vulnerability. A local low-privileged malicious user could exploit this vulnerability to escalate their privileges to the SYSTEM user.Show less

The Zoom Client for Meetings for MacOS (Standard and for IT Admin) before version 5.11.3 contains a vulnerability in the package signature validation during the update process. A local low-privileged user could exploit this vulnerability to escalate their privileges to root.Show less

The Zoom Client for Meetings for macOS (Standard and for IT Admin) starting with version 5.7.3 and before 5.11.5 contains a vulnerability in the auto update process. A local low-privileged user could exploit this vulnerability to escalate their privileges to root.Show less

PolicyController is a utility used to enforce supply chain policy in Kubernetes clusters. In versions prior to 0.2.1 PolicyController will report a false positive, resulting in an admission when it should not be admitted when there is at least one attestation with a valid signature and there are NO attestations of the type being verified (--type defaults to "custom"). An example image that can be used to test this is `ghcr.io/distroless/static@sha256:dd7614b5a12bc4d617b223c588b4e0c833402b8f4991fb5702ea83afad1986e2`. Users should upgrade to version 0.2.1 to resolve this issue. There are no workarounds for users unable to upgrade.Show less

cosign is a container signing and verification utility. In versions prior to 1.10.1 cosign can report a false positive if any attestation exists. `cosign verify-attestation` used with the `--type` flag will report a false positive verification when there is at least one attestation with a valid signature and there are NO attestations of the type being verified (--type defaults to "custom"). This can happen when signing with a standard keypair and with "keyless" signing with Fulcio. This vulnerability can be reproduced with the `distroless.dev/static@sha256:dd7614b5a12bc4d617b223c588b4e0c833402b8f4991fb5702ea83afad1986e2` image. This image has a `vuln` attestation but not an `spdx` attestation. However, if you run `cosign verify-attestation --type=spdx` on this image, it incorrectly succeeds. This issue has been addressed in version 1.10.1 of cosign. Users are advised to upgrade. There are no known workarounds for this issue.Show less

The Omron SYSMAC Cx product family PLCs (CS series, CJ series, and CP series) through 2022-05-18 lack cryptographic authentication. They utilize the Omron FINS (9600/TCP) protocol for engineering purposes, including downloading projects and control logic to the PLC. This protocol has authentication flaws as reported in FSCT-2022-0057. Control logic is downloaded to PLC volatile memory using the FINS Program Area Read and Program Area Write commands or to non-volatile memory using other commands from where it can be loaded into volatile memory for execution. The logic that is loaded into and executed from the user program area exists in compiled object code form. Upon execution, these object codes are first passed to a dedicated ASIC that determines whether the object code is to be executed by the ASIC or the microprocessor. In the former case, the object code is interpreted by the ASIC whereas in the latter case the object code is passed to the microprocessor for object code interpretation by a ROM interpreter. In the abnormal case where the object code cannot be handled by either, an abnormal condition is triggered and the PLC is halted. The logic that is downloaded to the PLC does not seem to be cryptographically authenticated, thus allowing an attacker to manipulate transmitted object code to the PLC and either execute arbitrary object code commands on the ASIC or on the microprocessor interpreter.Show less

The Omron SYSMAC Nx product family PLCs (NJ series, NY series, NX series, and PMAC series) through 2022-005-18 lack cryptographic authentication. These PLCs are programmed using the SYMAC Studio engineering software (which compiles IEC 61131-3 conformant POU code to native machine code for execution by the PLC's runtime). The resulting machine code is executed by a runtime, typically controlled by a real-time operating system. The logic that is downloaded to the PLC does not seem to be cryptographically authenticated, allowing an attacker to manipulate transmitted object code to the PLC and execute arbitrary machine code on the processor of the PLC's CPU module in the context of the runtime. In the case of at least the NJ series, an RTOS and hardware combination is used that would potentially allow for memory protection and privilege separation and thus limit the impact of code execution. However, it was not confirmed whether these sufficiently segment the runtime from the rest of the RTOS.Show less

OpenZeppelin Contracts is a library for smart contract development. Versions 4.1.0 until 4.7.1 are vulnerable to the SignatureChecker reverting. `SignatureChecker.isValidSignatureNow` is not expected to revert. However, an incorrect assumption about Solidity 0.8's `abi.decode` allows some cases to revert, given a target contract that doesn't implement EIP-1271 as expected. The contracts that may be affected are those that use `SignatureChecker` to check the validity of a signature and handle invalid signatures in a way other than reverting. The issue was patched in version 4.7.1.Show less

Gradle is a build tool. Dependency verification is a security feature in Gradle Build Tool that was introduced to allow validation of external dependencies either through their checksum or cryptographic signatures. In versions 6.2 through 7.4.2, there are some cases in which Gradle may skip that verification and accept a dependency that would otherwise fail the build as an untrusted external artifact. This can occur in two ways. When signature verification is disabled but the verification metadata contains entries for dependencies that only have a `gpg` element but no `checksum` element. When signature verification is enabled, the verification metadata contains entries for dependencies with a `gpg` element but there is no signature file on the remote repository. In both cases, the verification will accept the dependency, skipping signature verification and not complaining that the dependency has no checksum entry. For builds that are vulnerable, there are two risks. Gradle could download a malicious binary from a repository outside your organization due to name squatting. For those still using HTTP only and not HTTPS for downloading dependencies, the build could download a malicious library instead of the expected one. Gradle 7.5 patches this issue by making sure to run checksum verification if signature verification cannot be completed, whatever the reason. Two workarounds are available: Remove all `gpg` elements from dependency verification metadata if you disable signature validation and/or avoid adding `gpg` entries for dependencies that do not have signature files.Show less