Insufficient Verification of Data Authenticity

The myCred WordPress plugin before 3.2.5 does not verify that the receiver of an incoming payment gateway notification matches the site's configured merchant account, allowing unauthenticated attackers to have arbitrary amounts of the site's in-site currency credited to an account by completing a payment for the expected amount to a gateway account they control rather than the site's.Show less

A flaw was found in the lighthouse component of Red Hat Advanced Cluster Management for Kubernetes. This vulnerability stems from insufficient validation of advertised IP addresses within EndpointSlice objects. A compromised spoke cluster can exploit this by creating EndpointSlices with attacker-controlled IP addresses, causing other clusters' lighthouse DNS to redirect legitimate service traffic to malicious endpoints. This enables a remote attacker to conduct transparent Man-in-the-Middle (MITM) attacks on cross-cluster service communications, potentially leading to unauthorized information disclosure and data manipulation.Show less

A flaw was found in Submariner. This vulnerability allows a malicious cluster (spoke) to redirect network traffic from other connected clusters (peer clusters) by publishing a specially crafted network endpoint. The system fails to properly validate the network subnets provided by the malicious cluster, enabling it to declare arbitrary network ranges. Consequently, all network traffic intended for these arbitrary ranges from peer clusters will be rerouted through the attacker's tunnel, potentially leading to unauthorized information disclosure or network disruption.Show less

Insufficient Verification of Data Authenticity vulnerability in dropbox samly allows an attacker to establish an authenticated session using a SAML response the service provider never requested. Samly.SPHandler.validate_authresp/3 in lib/samly/sp_handler.ex validates a SAML response for the SP-initiated flow by comparing only the RelayState value, the IdP identifier, and the presence of a target URL held in the session. It never compares SubjectConfirmationData/@InResponseTo against the ID of the AuthnRequest the service provider issued, and that request ID is never persisted, so no comparison is possible. SAML 2.0 Core section 4.1.4.3 requires a service provider to reject a response whose InResponseTo does not match a request it made. The underlying esaml library checks status, signature, recipient, audience, and staleness, but likewise never inspects InResponseTo, so nothing else closes the gap. Exploitation requires a validly signed assertion from the trusted IdP, which an attacker can obtain for their own account, and a RelayState matching the victim's session; the assertion signature itself remains intact, so this is not a signature-forgery issue. This issue affects samly: from 0.3.0 onward.Show less

EMQX is a scalable and reliable MQTT broker for AI, IoT, IIoT, and connected vehicles. Prior to versions 5.8.11, 5.9.3, 5.10.4, 6.0.3, 6.1.2, and 6.2.1, the plugin-install REST API and dashboard upload accepted stale grants created with emqx ctl plugins allow because there was no five-minute grant lifetime or SHA-256 package binding. An attacker with a compromised dashboard administrator credential or API key with plugin-install permission who finds a stale allowed name and version can upload attacker-controlled bytes under the allowed .tar.gz filename through POST /api/v5/plugins/install or the dashboard plugin upload. The broker then installs and runs attacker-controlled Erlang code with the privileges of the EMQX process. This issue is fixed in versions 5.8.11, 5.9.3, 5.10.4, 6.0.3, 6.1.2, and 6.2.1.Show less

Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.15.0, an on-path attacker can append attributes after MESSAGE-INTEGRITY to an authenticated STUN request on plain UDP or TCP, adjust the STUN header length, and recompute the unkeyed FINGERPRINT while the original HMAC remains valid because it covers only the message prefix. Server-side parsing in src/server/ns_turn_server.c continues past MESSAGE-INTEGRITY through handle_turn_allocate(), handle_turn_create_permission(), handle_turn_refresh(), and handle_turn_command(), allowing trailing LIFETIME, XOR-PEER-ADDRESS, or ORIGIN attributes to override allocation lifetime, inject a permission, or bypass the origin check. TLS and DTLS deployments prevent this in-transit modification. This issue is fixed in version 4.15.0.Show less

stigmem (pip package stigmem-node) version 0.9.0a1 contains a timestamp-handling mismatch in federation peer-token validation that can cause valid peer tokens to be incorrectly treated as expired. This affects the availability and reliability of authenticated federation flows on nodes using federation peer authentication paths. The issue is fixed in 0.9.0a2, which uses the canonical millisecond-based validation path.Show less

ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a malicious unauthenticated P2P peer can answer Zebra's outbound getblocks or FindBlocks request with a small two-hash inventory and then serve a syntactically valid block whose coinbase height is far above the local chain tip. In zebrad/src/components/sync/downloads.rs, BlockDownloadVerifyError::AboveLookaheadHeightLimit originally carried only the block height and hash, so handle_block_response could not attribute the failure to the advertising peer. The error then reached the restart-worthy default path in zebrad/src/components/sync.rs, cancelling all in-flight downloads from honest peers and imposing a 67-second sync restart delay on mainnet. Because the peer was neither scored nor disconnected, the peer could repeat the cycle indefinitely with minimal bandwidth and significantly degrade synchronization without corrupting state. This issue is fixed in version 4.5.0.Show less

BetterDesk is a remote desktop management solution. BetterDesk versions through 2.3.0 improperly invalidate deleted device identities, allowing an unauthenticated client to replay or spoof a device ID and bypass registration controls. Version 3.0.0-alpha contains a patch. No known workarounds are available.Show less

Notepad++ is a free and open-source source code editor. Prior to 8.9.7, macros loaded from an attacker-controlled shortcuts.xml bypass the HMAC validation applied to UserDefinedCommands and can invoke Scintilla actions and the internal Open in Default Viewer command in an elevated Notepad++ process, allowing protected file modification and conditional elevated command execution when a local attacker influences settingsDir and a user triggers the macro. This issue is fixed in version 8.9.7.Show less

On a Kong Mesh global control plane, resources received over the zone-to-global KDS sync are attributed using the in-band, sender-controlled ControlPlane.Identifier rather than the authenticated zone identity derived from the connection. Authenticated zones can have the global control plane store and re-distribute those resources as belonging to another zone. The result is a cross-zone isolation bypass: the holder of a single enrolled zone's credential can inject, attribute, and overwrite resources in another zone's namespace mesh-wide. The root cause lives in Kuma's open-source KDS sync code, which Kong Mesh's control plane is built on.Show less

openssl_encrypt versions before 1.4.0 contain an authentication bypass vulnerability in CamelliaCipher that disables HMAC tag generation and verification when the PYTEST_CURRENT_TEST environment variable is set. Attackers with code execution can set this environment variable to produce unauthenticated ciphertext and bypass integrity protection on encrypted data.Show less

openssl_encrypt versions before 1.4.0 contain an insecure default configuration that trusts the entire RFC 1918 private address space in IntegrityProxyConfig trusted_proxies. Attackers on private networks can forge client certificate headers to bypass mTLS authentication when ProxyAuth validation is relaxed or modified.Show less

openssl_encrypt versions before 1.4.0 silently skip JSON schema validation when the jsonschema library is not installed, allowing malformed metadata to be accepted. Attackers can remove the jsonschema package or supply unknown metadata format versions to bypass all schema checks and process malicious data.Show less

CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, canonicalizeParams in src/utils/cache.ts serializes request parameters with unescaped ampersand, equals-sign, and vertical-bar delimiters, allowing different logical parameter sets used by buildCacheKey to collide and an attacker to prime a shared cache with a response for a victim's distinct query. This issue is fixed in version 0.4.112.Show less

go-chi/chi versions 0.9.0 before 5.3.0 contains an IP spoofing vulnerability in the RealIP middleware, which resolves the request source IP (Request.RemoteAddr) using the first IP in the X-Forwarded-For header without validating trusted proxies. A malicious client can prepend a forged IP as the first value of the X-Forwarded-For header to spoof the request source IP, potentially bypassing access controls or falsifying request logs.Show less

OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, the POST /api/v1alpha1/autobuild endpoint in internal/openchoreo-api/api/handlers/webhook_handler.go selected a webhook provider from caller-controlled X-Event-Key, accepted Bitbucket requests without HMAC-SHA256 in X-Hub-Signature or a configured bitbucket-secret, and allowed unauthenticated build triggers for components matched by repository URL and branch, including cross-provider triggers using attacker-supplied commit SHAs. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2.Show less

Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. From 4.4.2 until 4.5.0-rc.4, `POST /api/v1/runs/:runParam/replay` in apps/webapp/app/routes/api.v1.runs.$runParam.replay.ts uses `prisma.taskRun.findUnique({ where: { friendlyId: runParam } })` without a runtimeEnvironmentId filter, then ReplayTaskRunService in apps/webapp/app/v3/services/replayTaskRun.server.ts replays the selected run in the victim environment. Any valid environment API key can therefore replay another tenant's run by friendlyId, consuming victim resources and repeating side effects; when `payloadType: "application/store"` is used, overrideExistingPayloadPacket() calls conditionallyImportPacket() on existingTaskRun.payload without an integrity check, so payload bytes overwritten through a separate object-store path-traversal vulnerability become attacker-controlled input to the victim task. This issue is fixed in version 4.5.0-rc.4.Show less

Cleartext storage in PostgreSQL pgcrypto disabled ciphers allows a user to recover cleartext, via direct observation of the faulty ciphertext. The OpenSSL version and OpenSSL configuration determine the disabled ciphers. If the application accepts encrypted data as input, decryption will succeed even with the wrong key. This in turn loses the modest protection from the Modification Detection Code (MDC). Affected functions are pgp_sym_encrypt, pgp_sym_decrypt, pgp_pub_encrypt, pgp_pub_decrypt, pgp_sym_encrypt_bytea, pgp_sym_decrypt_bytea, pgp_pub_encrypt_bytea, and pgp_pub_decrypt_bytea. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected.Show less