stigmem-node contains an insecure default configuration vulnerability that allows federation traffic to traverse networks without mTLS protection when non-loopback endpoints are enabled. Operators who explicitly disabled...Show morestigmem-node contains an insecure default configuration vulnerability that allows federation traffic to traverse networks without mTLS protection when non-loopback endpoints are enabled. Operators who explicitly disabled mTLS while binding federation to non-loopback addresses expose federation traffic to cleartext interception and man-in-the-middle attacks.Show less |
The HTTPPasswordMgr class in the urllib.request module, along with its subclasses HTTPPasswordMgrWithDefaultRealm and HTTPPasswordMgrWithPriorAuth, did not take the URL scheme into account when matching stored credential...Show moreThe HTTPPasswordMgr class in the urllib.request module, along with its subclasses HTTPPasswordMgrWithDefaultRealm and HTTPPasswordMgrWithPriorAuth, did not take the URL scheme into account when matching stored credentials against a requested URL. Credentials added for an https:// URL were also used for requests to the same host over http://, so an attacker able to redirect or downgrade a client to plain HTTP (for example, via an HTTPS-to-HTTP redirect or an on-path position) could capture credentials in cleartext. Credentials added for http:// URLs could likewise be sent over https://.
Credential matching is now scoped by URL scheme. Credentials registered with a URL that includes a scheme are only used for requests with the same scheme. Credentials registered with a bare authority (such as example.com or example.com:8080) continue to match any scheme, preserving compatibility with existing code, including proxy authentication.
Users who cannot upgrade immediately can mitigate by ensuring that applications never make plain http:// requests to hosts for which credentials are registered, for example by not following redirects to http:// URLs.Show less |
A vulnerability in the web-based management interface of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system.
This vulnerabilit...Show moreA vulnerability in the web-based management interface of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system.
This vulnerability is due to insufficient access control enforcement for specific template types that are not included in the encryption allowlist. A low-privileged attacker could exploit this vulnerability by viewing logs on the local system or on a remote logging server. A successful exploit could allow the attacker to view sensitive authentication credentials, which could lead to further compromise of network infrastructure and connected services.Show less |
Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP.
The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HT...Show moreData::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP.
The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP.
The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string.
Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.Show less |
This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be ab...Show moreThis issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to access sensitive user data.Show less |
Zohocorp ManageEngine Endpoint Central versions before 11.4.2528.34 are affected by cleartext transmission of sensitive information vulnerability. |
AgenticMail gives AI agents real email addresses and phone numbers. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 had weakness related to validation and and binding of inactive-ag...Show moreAgenticMail gives AI agents real email addresses and phone numbers. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 had weakness related to validation and and binding of inactive-agent hour filtering; storage SQL identifier validation; metadata-backed ownership checks for raw storage SQL; blocking direct storage metadata access through raw SQL; fail-closed outbound worker secret handling; SMTP envelope/header control-character validation before command construction; and TLS certificate verification as the default for MailSender with an explicit opt-out for local development. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 are patched.Show less |
@hapi/wreck is an HTTP client utility. Prior to 18.1.2, Wreck strips credential headers including Authorization, Cookie, and Proxy-Authorization before following a cross-origin redirect, but the origin check compares hos...Show more@hapi/wreck is an HTTP client utility. Prior to 18.1.2, Wreck strips credential headers including Authorization, Cookie, and Proxy-Authorization before following a cross-origin redirect, but the origin check compares hostnames only and ignores scheme and port, so credentials are forwarded intact across same-host port changes and HTTPS-to-HTTP downgrades, allowing a co-tenant on an adjacent port or a network-position attacker capable of forging a redirect to capture bearer tokens, session cookies, and proxy credentials and impersonate the victim against the upstream service. This issue is fixed in version 18.1.2.Show less |
oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, auth.Client follows the realm URL from a registry's WWW-Authenticate: Bearer challenge without validating the scheme or host, allowing a malicious or co...Show moreoras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, auth.Client follows the realm URL from a registry's WWW-Authenticate: Bearer challenge without validating the scheme or host, allowing a malicious or compromised registry to cause SSRF to internal networks such as http://169.254.169.254/, http://10.0.0.x/, and http://127.0.0.1/, or to downgrade a registry contacted over https:// to an http:// token endpoint in registry/remote/auth/client.go through Client.Do(), Client.fetchBearerToken(), fetchDistributionToken, and fetchOAuth2Token. This issue is fixed in version 2.6.1.Show less |
Cleartext transmission of sensitive information in Windows Ancillary Function Driver for WinSock allows an authorized attacker to disclose information locally. |
Fiber is an Express inspired web framework written in Go. Prior to 3.4.0, the helmet middleware in middleware/helmet/helmet.go never sets the Strict-Transport-Security response header even when HSTSMaxAge is configured b...Show moreFiber is an Express inspired web framework written in Go. Prior to 3.4.0, the helmet middleware in middleware/helmet/helmet.go never sets the Strict-Transport-Security response header even when HSTSMaxAge is configured because it checks c.Protocol() for https instead of c.Scheme(). This issue is fixed in version 3.4.0.Show less |
IBM watsonx.data intelligence 5.2.0, 5.2.1, 5.2.2, 5.3.0 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques. |
IBM watsonx.data intelligence 5.2.2, 5.3.0, 5.3.1, 5.3.1 through Patch 1 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques. |
Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2025.5.0, The iOS companion app ignores the SSID allowlist for internal networks. The app uses SSID to detect whe...Show moreHome Assistant is open source home automation software that puts local control and privacy first. Prior to 2025.5.0, The iOS companion app ignores the SSID allowlist for internal networks. The app uses SSID to detect when to use the internal URL, but whenever the app cannot find any other URL to be used, it fallbacks to the internal URL as well, which can expose user's token when connected to a not secure network. This vulnerability is fixed in 2025.5.0.Show less |
The Apache Airflow FTP provider's `FTPSHook.get_conn()` created an `ftplib.FTP_TLS` connection but never called `prot_p()`, so although the control channel was TLS-protected the data channel was transmitted in cleartext....Show moreThe Apache Airflow FTP provider's `FTPSHook.get_conn()` created an `ftplib.FTP_TLS` connection but never called `prot_p()`, so although the control channel was TLS-protected the data channel was transmitted in cleartext. Any deployment using `FTPSHook` or `FTPSFileTransmitOperator` to move files over FTPS exposed file contents and credentials-in-transit to a network attacker able to observe the data connection. Upgrade apache-airflow-providers-ftp to `3.15.1` or later, which issues `PROT P` to encrypt the data channel.Show less |
Deno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.0.0 until 2.7.8, a flaw in Deno's Node.js tls compatibility layer could cause a TLS client to transmit application data in plaintext after a connection re...Show moreDeno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.0.0 until 2.7.8, a flaw in Deno's Node.js tls compatibility layer could cause a TLS client to transmit application data in plaintext after a connection retry. When `autoSelectFamily was enabled and the first address-family attempt failed, the socket reinitialization path reused a stale TLS upgrade hook that was bound to the original, failed handle. As a result, the replacement TCP connection was never upgraded to TLS, and any data the application wrote before the secureConnect event travelled over the network unencrypted. A network attacker positioned to cause the initial connection attempt to fail (for example, by dropping IPv6 traffic on a dual-stack host) could deterministically trigger the fallback path and observe or tamper with traffic that the application believed was TLS-protected. This vulnerability is fixed in 2.7.8.Show less |
Guzzle is an extensible PHP HTTP client. Prior to 7.12.1, in certain configurations, traffic expected to be protected by TLS on the hop to the proxy is transmitted in cleartext. Proxy authentication credentials (the Prox...Show moreGuzzle is an extensible PHP HTTP client. Prior to 7.12.1, in certain configurations, traffic expected to be protected by TLS on the hop to the proxy is transmitted in cleartext. Proxy authentication credentials (the Proxy-Authorization header, proxy userinfo in the proxy URL, or CURLOPT_PROXYUSERPWD) are sent without encryption, and the CONNECT target host and port for tunneled HTTPS requests are exposed. The built-in cURL handlers (GuzzleHttp\Handler\CurlHandler and GuzzleHttp\Handler\CurlMultiHandler, used by default whenever the PHP cURL extension is available) accept an https:// proxy. libcurl older than 7.50.2 silently treats an https:// proxy as a plaintext http:// proxy. The TLS connection to the proxy is never established, and the proxy leg is cleartext with no error or warning. An application is affected when it sends requests through one of the built-in cURL handlers, configures an https:// proxy expecting the proxy connection itself to be encrypted, and runs with libcurl older than 7.50.2. This vulnerability is fixed in 7.12.1.Show less |
HCL Connections contains a broken access control vulnerability that may allow an unauthorized user to view data in a single specific scenario. |
Overview:
A vulnerability has been found in FAST/TOOLS and CI Server. The web server may return a response containing the CI Server setting information. This information could
be exploited by an attacker for other atta...Show moreOverview:
A vulnerability has been found in FAST/TOOLS and CI Server. The web server may return a response containing the CI Server setting information. This information could
be exploited by an attacker for other attacks.
The affected products and versions are as follows:
FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04
CI Server (All packages) R1.01 to R1.04Show less |
An attacker within BLE communication range can passively intercept
wireless traffic and obtain sensitive health-related information,
including glucose measurement values. |