Missing Authentication for Critical Function

A security vulnerability has been detected in notionnext-org NotionNext up to 4.10.10. Affected by this issue is the function cleanCache of the file pages/api/cache.js of the component Authentication Guard. The manipulation of the argument token leads to missing authentication. The attack may be initiated remotely. Versions 4.1.0 - 4.9.5.2 allow unauthenticated exploitation due to missing method check. In versions 4.9.5.7 - 4.10.10 a guard present but only enforced when CACHE_REVALIDATION_TOKEN is set. Default deployments remain unprotected. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was identified in ООО НПО Ритм GEOritm up to 2.45.1. This affects an unknown part of the file /restapi/objects/obj-groups of the component REST API. Such manipulation of the argument objectId leads to missing authentication. The attack can be launched remotely. The exploit is publicly available and might be used. Upgrading to version 2.46 is able to mitigate this issue. It is advisable to upgrade the affected component. The vendor confirms: "In August 2026, NPO Ritm received an official vulnerability notification from the Russian Federal Service for Technical and Export Control (FSTEC Russia). The vulnerability was registered under identifier BDU:2026-11235. Following our internal investigation, we confirmed the vulnerability and implemented the necessary security fixes. The vulnerability has been fixed on our hosted GEO.RITM server at geo.ritm.ru. The fix has also been included in GEO.RITM version 2.46, which is already being distributed to our customers."Show less

Obot is an open-source AI agent/MCP platform. In all versions up to and including commit d7e6970, the Docker quickstart command documented in the README starts the container listening on 0.0.0.0:8080 with authentication disabled by default. When authentication is disabled, every request is mapped to a synthetic "nobody" user that holds the Owner and Admin roles, so any unauthenticated party who can reach the exposed port obtains full administrative access to the Obot API and UI, including the ability to register and launch attacker-controlled MCP servers. Because the quickstart also mounts /var/run/docker.sock into the container, the MCP runtime backend reachable this way has access to the host's Docker control surface. The fix is documentation-only: the quickstart now enables authentication, and operators who followed the previous instructions should set OBOT_SERVER_ENABLE_AUTHENTICATION=true before exposing the host to any untrusted network.Show less

A vulnerability was found in mathurvishal CloudClassroom-PHP-Project up to 5dadec098bfbbf3300d60c3494db3fb95b66e7be. Affected is an unknown function of the file loginlinkstudent.php. Performing a manipulation of the argument umail results in missing authentication. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was found in coollabsio Coolify up to 4.1.0. This affects the function Github::redirect of the file /webhooks/source/github/redirect of the component GitHub App Setup Handler. The manipulation of the argument state results in missing authentication. The attack can be executed remotely. The exploit has been made public and could be used. Upgrading to version 4.1.1 mitigates this issue. The patch is identified as fc89e357feed5180ed1ab5eb9cb330578f025539. The affected component should be upgraded.Show less

The Comments plugin (getgrav/grav-plugin-comments) for Grav CMS through version 1.2.10 registers an admin handler that returns comment data as JSON without any authentication check. The handler branches on isAdmin(), which only indicates that the admin service is registered on the current route rather than that the visitor is authenticated, and it echoes the JSON and calls exit() during the plugins stage, before the classic Admin plugin would render its login screen. On a site using the classic Admin plugin with Comments enabled (the default), an unauthenticated remote attacker can request /admin/comments/page:<n> (e.g. page:0.001) and retrieve every comment from the last 7 days, including each commenter's email address and the absolute server filesystem path of the data file. Sites running the Grav 2.0 Admin Next stack (admin2 + api) are not affected via this path. The issue is fixed in 1.2.11, which requires an authenticated user with admin.comments or admin.super and removes the absolute filePath from the response.Show less

SCBE-AETHERMOORE is a geometric AI governance and evaluation framework. Starting in version 4.0.2 and prior to version 4.2.1, the AetherBrowser API server (`scripts/aetherbrowser/api_server.py`) exposes the `POST /api/ops/check-email` endpoint without any authentication. Any remote attacker can call this endpoint and trigger execution of the `email_reader.py` subprocess, which connects to configured ProtonMail or Gmail accounts via IMAP and returns email metadata (sender, subject, body snippet) in the JSON response. The server binds to `0.0.0.0:8100` by default with CORS set to `allow_origins=["*"]`, making it reachable from any network or browser origin. Version 4.2.1 patches the issue.Show less

Ciena Navigator Network Control Suite (NCS) contains an information exposure vulnerability in an event-streaming API that does not properly enforce authentication. An unauthenticated attacker with network access to the affected service could access the event stream and potentially obtain sensitive information.Show less

X-SpringBoot through 6.0 exposes appKey and appSecret credentials in the GET /application/manager/select endpoint without authentication or field filtering. Unauthenticated attackers can retrieve these credentials and use them to send arbitrary SMS messages through any tenant's SMS provider, enabling SMS bombing and impersonation attacks.Show less

Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, summary An unauthenticated request to POST /api/v1/import/otrs/import_check blocks a Zammad request worker for roughly two minutes. The import_check and import_status actions are missing the setup_done_response guard that other actions in the same controller carry, so they execute on fully set-up production instances. The action enters a retry loop against a blank OTRS endpoint, sleeping for 30 s + 45 s between attempts. Impact An unauthenticated remote attacker denies service to a production Zammad instance. Each request costs almost nothing and forces ~115 seconds of server-side blocking. A few requests per second saturate the Puma worker pool. The condition persists as long as the traffic continues. No account, valid import configuration, or target knowledge beyond the hostname is needed. CSRF token is trivially obtained from any prior GET response. This issue is fixed in version 7.0.2.Show less

A security flaw has been discovered in zhistaredu StarTraining up to 3.8.1. The affected element is an unknown function of the file SecurityConfig.java of the component api-docs Endpoint. Performing a manipulation results in missing authentication. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was identified in zhistaredu StarTraining up to 3.8.1. Impacted is the function anonymous of the file /druid/index.html of the component Druid Console. Such manipulation leads to missing authentication. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability has been found in GibbonEdu Gibbon up to 30.0.01. The affected element is the function makeBlock of the file modules/Planner/units_add_blockAjax.php of the component Unit Planner. The manipulation of the argument gibbonUnitBlockID/mode leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 31.0.00 is sufficient to fix this issue. The identifier of the patch is 07e719368eae8dfb4e22e19424ceab6074164ebc. It is recommended to upgrade the affected component.Show less

The Botslab G980H dash camera firmware does not require authenticated pairing or client binding before permitting access to Bluetooth Low Energy communications and GATT characteristics. An unauthenticated attacker within Bluetooth range could intercept or directly retrieve sensitive device information, including device identifiers, firmware information, and protected WiFi credentials.Show less

The Botslab G980H dash camera firmware contains an authentication vulnerability in the root account exposed through the device's UART interface. The affected account does not require a password before granting access to a privileged system interface, and the interface also displays the device's WiFi password during startup. An unauthenticated attacker with physical access to the device could connect to the UART interface, obtain root privileges, and recover the WiFi password.Show less

Dell ThinOS 10, versions prior to SecurityAddon_2605.10.2766_T10, contain a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.Show less

An unauthenticated Remote Code Execution via Arbitrary File Upload vulnerability in the web management interface in Honeywell PD45 Industrial Printer version F10.19.010040, allows upload of attacker controlled files without requiring authentication. An attacker could potentially exploit this vulnerability, leading to the execution of malicious files and commands. Honeywell also recommends updating to the most recent firmware version, Honeywell PD45 Industrial Printer firmware F10.22.030745, which includes a fix for this vulnerability.Show less

DBHub is a database MCP server for Postgres, MySQL, SQL Server, Oracle, MariaDB, SQLite. Versions prior to 0.22.5 expose an unauthenticated HTTP MCP endpoint when started with the documented HTTP transport mode, for example `--transport http --port 8080`. The HTTP server attempts to protect browser-origin access by checking whether the `Origin` hostname equals the `Host` hostname, then reflecting the validated `Origin` into `Access-Control-Allow-Origin`. This does not stop DNS rebinding. After an attacker-controlled hostname rebinds to a victim-accessible DBHub HTTP server, both `Origin` and `Host` can contain the attacker-controlled hostname, so DBHub accepts the request and dispatches MCP tool calls. As a result, a malicious website can deterministically invoke DBHub MCP tools from the victim's browser without prompt injection or model involvement. With the default demo configuration this can read and write the demo SQLite database; with a real configured database, the same primitive can read, enumerate, and potentially write database contents depending on DBHub's configured tool permissions and database credentials. Version 0.22.5 fixes the issue.Show less

A vulnerability was found in volotat Anagnorisis up to 0.3.1/0.4.0. Affected is an unknown function of the file app.py of the component Socket.IO Connect Interface. The manipulation results in missing authentication. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, the default-open GET /log WebSocket route configured in config/node/api.yaml and registered by network/api/api.go does not require authentication. The first client message is parsed as a logger Profile in network/api/logs/logSender.go and applied process-wide through Profile.Apply, allowing a remote client to change global log levels and formatting options until the connection closes. The same connection is registered as a log observer and can receive live process logs. An attacker can suppress normal logs, increase verbosity, distort operator visibility, and access operational information without credentials. This issue is fixed in version 1.7.20.Show less