Missing Authentication for Critical Function

The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message(). The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires. A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise. The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default.Show less

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 4.11.0 to before version 26.05, several Jakarta WebSocket endpoints in goobi-viewer-core (DownloadTaskEndpoint, CampaignEndpoint, AutocompleteEndpoint, UserEndpoint) accept connections without verifying that the associated HttpSession belongs to a logged-in user, and none validate the Origin header against an allowlist. An unauthenticated attacker can therefore connect to these endpoints; through CampaignEndpoint this allows polluting the in-process crowdsourcing page-lock map and broadcasting forged lock messages, disrupting reviewers' work. This issue has been patched in version 26.05.Show less

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 24.03 to before version 26.05, the DownloadTaskEndpoint WebSocket endpoint (/tasks/download/monitor.socket) in goobi-viewer-core accepts download requests from unauthenticated users. This issue has been patched in version 26.05.Show less

NetBox MCP Server is a simple read-only Model Context Protocol server for NetBox. Prior to version 1.2.1, when running with TRANSPORT=http, the MCP server has no authentication on the HTTP endpoint. Any client that can reach the port gets a valid MCP session and full access to all four NetBox tools - no token or credential needed. This issue has been patched in version 1.2.1.Show less

Missing authentication for a critical function in the Android Debug Bridge daemon (adbd) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 allows an attacker to obtain an unauthenticated shell (uid 2000), a foothold for privilege escalation to root. The device ships with ro.adb.secure=0 (no host key authorization) and USB ADB enabled by default; ADB over TCP is not enabled by default but, once enabled (e.g. via the shipped /system/bin/adbd_tcp.sh or 'setprop persist.adb.tcp.port 5555'), the same unauthenticated shell is reachable over the network (CVSS 4.0 base 9.3).Show less

PraisonAI is a multi-agent teams system. From version 4.5.115 to before version 4.6.61, the published A2U advisory GHSA-f292-66h9-fpmf says unauthenticated A2U event streaming was fixed in praisonai 4.5.115. Current head still exposes the same A2U subscription and event routes without authentication when the operator starts the documented CLI entrypoint. The current CLI wrapper does not expose --api-key, does not install the common API-key middleware, and does not generate a token for A2U. It calls create_a2u_routes(app) directly. That helper only enforces auth if A2U_AUTH_TOKEN is already present; if the variable is missing, _authenticate_request() returns None and treats auth as disabled. This issue has been patched in version 4.6.61.Show less

PraisonAI is a multi-agent teams system. From version 4.2.1 to before version 4.6.59, PraisonAI's AgentOS FastAPI deployment surface remains unauthenticated in current main and in releases after the published patched version for GHSA-pm96-6xpr-978x / CVE-2026-40151. The chat route directly calls agent.chat(request.message). No-auth and wrong-bearer requests both execute the deployed agent. This is broader than passive metadata disclosure. In any deployment where AgentOS wraps agents with tools, private context, memory, API integrations, or cost-bearing model calls, an unauthenticated reachable client can drive those agents. This issue has been patched in version 4.6.59.Show less

PraisonAI is a multi-agent teams system. From version 4.6.56 to before version 4.6.59, PraisonAI's LinearBot starts a public webhook listener on 0.0.0.0 and treats LINEAR_WEBHOOK_SECRET as optional. When the secret is absent, startup only logs a warning and _handle_webhook() skips Linear-Signature verification entirely. An unauthenticated network caller who can reach the webhook endpoint can submit a forged Linear-Event: AgentSession request. The forged request is parsed, scheduled for background processing, dispatched to _handle_agent_session(), and passed into BotSessionManager.chat(). The bot then attempts to post the agent response back to Linear under the configured bot token. The PoV is offline and deterministic. It does not contact Linear. It calls the webhook handler directly, monkey-patches the outbound Linear comment path, and proves both sides of the boundary. This issue has been patched in version 4.6.59.Show less

PraisonAI is a multi-agent teams system. From version 4.5.112 to before version 4.6.59, PraisonAI's installed console entrypoint is Typer-first. In current releases, the recipe command is registered in the Typer app and praisonai recipe serve dispatches to the deprecated Typer command in src/praisonai/praisonai/cli/commands/recipe.py. That Typer command can start the Recipe HTTP server on a non-localhost interface with no authentication. It prints a deprecation warning, and then launches the server. Because config.auth is absent, create_app() does not attach the API-key or JWT middleware. Unauthenticated requests can then reach the recipe API and, when enabled, /admin/reload. This issue has been patched in version 4.6.59.Show less

The CGM CLININET application runs the cgm-updater process listening on an open network port without any authentication. The vulnerability was confirmed to affect versions up to 2026.MS3 but later versions may also be vulnerable.Show less

CGM CLININET is vulnerable to Missing Authentication for Critical Function in the /DocManagment path. The endpoint is accessible without authentication, allowing an unauthenticated attacker in the adjacent network to retrieve the list of patient documents and download those documents.  This issue was fixed in version 2026.MS3Show less

Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback.Show less

An authentication bypass vulnerability in the public onPhase/ frevvo registration form version 11.0.14 allows an unauthenticated remote attacker to authenticate as an arbitrary tenant user, obtain TenantAdmin and Designer privileges, and execute arbitrary operating system commands via manipulation of registration parameters containing a valid tenant name and existing user identifier.Show less

The ONVIF device service on affected Kiloview E3 NDI encoder firmware accepts hostname, DNS, and NTP configuration write operations without requiring authentication, regardless of the device's configured authentication setting for this service. A remote, unauthenticated attacker can alter the device hostname, redirect DNS resolution, or modify the configured time source, enabling follow on attacks such as traffic interception or certificate validation bypass.Show less

The ONVIF device service on the E3 responds to certain informational requests without requiring authentication. A remote, unauthenticated party can retrieve detailed device identifiers along with a list of configured user accounts and their privilege levels. This aids attackers in fingerprinting vulnerable devices and preparing targeted credential attacks.Show less

A vulnerability in the web interface of AOS-8 could allow an unauthenticated remote attacker to achieve remote code execution. Successful exploitation could lead to complete device control, enabling interception of network traffic and potential compromise of connected systems.Show less

Traefik v3.7.13 before v3.7.14 contains an access-control bypass in the Kubernetes Ingress NGINX provider, where the HTTP router generated for ssl-passthrough Ingresses on non-TLS entry points never applies the Ingress's access-control annotations. Unauthenticated attackers reaching the HTTP entry point with the Ingress host can access backends protected by auth-type, auth-url, or whitelist-source-range annotations, with nothing logged.Show less

A vulnerability was determined in oretnom23 php-travel-agency-system. Affected by this issue is some unknown functionality of the file admin/session.php of the component Session Handler. Executing a manipulation of the argument user_id can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.Show less