Improper Input Validation

A flaw was found in KubeVirt's network annotation generator. When a tenant creates a VirtualMachineInstance with a Multus network configuration, the supplied networkName value is written verbatim into the launcher pod's v1.multus-cni.io/default-network annotation without format validation or sanitization. The only admission check rejects empty strings; no DNS-1123 format validation, JSON detection, or special character rejection is performed. When the ExternalNetResourceInjection Beta feature gate is enabled (off by default, cluster-admin only), the NAD lookup that would otherwise catch malformed names is skipped by design. A tenant with kubevirt.io:edit permissions can inject a JSON-formatted NetworkSelectionElement array specifying an arbitrary namespace, NAD name, static IP address, and MAC address. Multus on the node parses this JSON and attaches the launcher pod to the specified network attachment in any namespace, enabling cross-namespace network access and IP/MAC impersonation on network segments normally segregated from tenant workloads. The ExternalNetResourceInjection feature gate was introduced in KubeVirt v1.8.0 (first shipped in OpenShift Virtualization 4.21).Show less

In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address.Show less

NSD version 4.14.0 introduced a bug where a specially crafted APL RR, with an adflength larger than permitted for the address family will overwrite the stack when the zone is written to disk, with a maximum of 111 attacker controlled bytes.Show less

Gogs is an open source self-hosted Git service. Prior to 0.14.3, the Gogs Mirror Settings functionality provide an alternative way from the well protected New Migration functionality for any authenticated users to import local repositories. This issue stems from a lack of validation of SaveAddress function. This vulnerability is fixed in 0.14.3.Show less

Gogs is an open source self-hosted Git service. Prior to 0.14.3, a malicious user with rights to create a new file on a repository or wiki page can trigger a denial of service condition in which the pages containing the listing of files will return HTTP error 500 and render the web interface unusable for the repository or wiki. The issue is present in file internal/route/repo/wiki.go and internal/route/repo/view.go where the pages try to recover commit information. If errors are returned while recovering commit information, the page will return a 500 error and stop rendering, resulting in a denial of service. This vulnerability is fixed in 0.14.3.Show less

Race in DevTools in Google Chrome prior to 149.0.7827.197 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)Show less

Insufficient validation of untrusted input in Navigation in Google Chrome prior to 149.0.7827.197 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High)Show less

Warp is an agentic development environment. From 0.2025.03.05.08.02.stable_00 until 0.2026.05.06.15.42.stable_01, Warp accepts non-inline `OSC 1337;File` payloads from terminal output and materialize the decoded payload as a local file without an additional confirmation step. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01.Show less

Warp is an agentic development environment. From 0.2023.10.24.08.03.stable_00 until 0.2026.05.06.15.42.stable_01, Warp may open executable local files through the operating system default file handler. A malicious Markdown document or project can contain a local-file link that appears as normal rendered content. If a user opens the Markdown in Warp and clicks the link, affected builds may route the resolved local file to a platform file opener instead of limiting the action to safe viewer/editor targets. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages().Show less

In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding.Show less

In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ]Show less

Improper Neutralization used in an OS Command in the container launcher in Google Gemini CLI (versions prior to 0.39.1) and run-gemini-cli GitHub Action (versions prior to 0.1.22) on headless CI platforms allows an unprivileged attacker to achieve pre-sandbox host-level code execution a maliciously crafted .gemini/.env file.Show less

In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.Show less

ACE vulnerability in conditional configuration file processing by QOS.CH logback-core up to and including version 1.5.36 in Java applications, allows an attacker to execute arbitrary code circumventing existing protections against CVE-2025-11226 by compromising an existing logback configuration file or by injecting an environment variable before program execution. A successful attack requires the presence of Janino library to be present on the user's class path. In addition, the attacker must  have write access to a configuration file. Alternatively, the attacker could inject a malicious environment variable pointing to a malicious configuration file. In both cases, the attack requires existing privilege. Please note that in logack version 1.5.37 conditional processing using Janino was removed.Show less