Improper Input Validation

free5GC is an open-source project for 5th generation (5G) mobile core networks. free5GC go-upf versions up to and including 1.2.6, corresponding to free5gc smf up to and including 1.4.0, have an Improper Input Validation and Protocol Compliance vulnerability leading to Denial of Service. Remote attackers can disrupt core network functionality by sending a malformed PFCP Association Setup Request. The UPF incorrectly accepts it, entering an inconsistent state that causes subsequent legitimate requests to trigger SMF reconnection loops and service degradation. All deployments of free5GC using the UPF and SMF components may be affected. As of time of publication, a fix is in development but not yet available. No direct workaround is available at the application level. Applying the official patch, once released, is recommended.Show less

Valkey is a distributed key-value database. Starting in version 9.0.0 and prior to version 9.0.3, a malicious actor with network access to Valkey can cause the system to abort by triggering an assertion. When processing incoming requests, the Valkey system does not properly reset the networking state after processing an empty request. A malicious actor can then send a request that the server incorrectly identifies as breaking server side invariants, which results in the server shutting down. Version 9.0.3 fixes the issue. As an additional mitigation, properly isolate Valkey deployments so that only trusted users have access.Show less

A vulnerability has been found in datapizza-labs datapizza-ai 0.0.2. Affected by this vulnerability is the function RedisCache of the file datapizza-ai-cache/redis/datapizza/cache/redis/cache.py. Such manipulation leads to deserialization. The attack requires being on the local network. A high complexity level is associated with this attack. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was detected in funadmin up to 7.1.0-rc4. This issue affects the function getMember of the file app/common/service/AuthCloudService.php of the component Backend Endpoint. The manipulation of the argument cloud_account results in deserialization. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. In versions 1.1.2-alpha and below, URL ingest allows overly permissive server-side fetch behavior and can be coerced into requesting unsafe targets. Potential access/probing of private/local network resources from the OpenSift host process when ingesting attacker-controlled URLs. This issue has been fixed in version 1.1.3-alpha. To workaround when using trusted local-only exceptions, use OPENSIFT_ALLOW_PRIVATE_URLS=true with caution.Show less

Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions 6.0 and above have a Stored HTML Injection vulnerability in the active sessions table located on the API settings page, allowing an attacker with valid credentials to inject arbitrary HTML code that will be rendered in the browser of any administrator who visits the active sessions page. The rowCallback function contains the value data.x_forwarded_for, which is directly concatenated into an HTML string and inserted into the DOM using jQuery’s .html() method. This method interprets the content as HTML, which means that any HTML tags present in the value will be parsed and rendered by the browser. An attacker can use common tools such as curl, wget, Python requests, Burp Suite, or even JavaScript fetch() to send an authentication request with an X-Forwarded-For header that contains malicious HTML code instead of a legitimate IP address. Since Pi-hole implements a Content Security Policy (CSP) that blocks inline JavaScript, the impact is limited to pure HTML injection without the ability to execute scripts. This issue has been fixed in version 6.4.1.Show less

Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions 6.4 and below are vulnerable to stored HTML injection through the local DNS records configuration page, which allows an authenticated administrator to inject code that is stored in the Pi-hole configuration and rendered every time the DNS records table is viewed. The populateDataTable() function contains a data variable with the full DNS record value exactly as entered by the user and returned by the API. This value is inserted directly into the data-tag HTML attribute without any escaping or sanitization of special characters. When an attacker supplies a value containing double quotes ("), they can prematurely “close” the data-tag attribute and inject additional HTML attributes into the element. Since Pi-hole implements a Content Security Policy (CSP) that blocks inline JavaScript, the impact is limited. This issue has been fixed in version 6.4.1.Show less

go-ethereum (geth) is a golang execution layer implementation of the Ethereum protocol. Prior to version 1.16.9, a vulnerable node can be forced to shutdown/crash using a specially crafted message. The problem is resolved in the v1.16.9 and v1.17.0 releases of Geth.Show less

CediPay is a crypto-to-fiat app for the Ghanaian market. A vulnerability in CediPay prior to version 1.2.3 allows attackers to bypass input validation in the transaction API. The issue has been fixed in version 1.2.3. If upgrading is not immediately possible, restrict API access to trusted networks or IP ranges; enforce strict input validation at the application layer; and/or monitor transaction logs for anomalies or suspicious activity. These mitigations reduce exposure but do not fully eliminate the vulnerability.Show less

The Two Factor (2FA) Authentication via Email plugin for WordPress is vulnerable to Two-Factor Authentication Bypass in versions up to, and including, 1.9.8. This is because the SS88_2FAVE::wp_login() method only enforces the 2FA requirement if the 'token' HTTP GET parameter is undefined, which makes it possible to bypass two-factor authentication by supplying any value in the 'token' parameter during login, including an empty one.Show less

Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat. When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed. This issue affects Apache Tomcat Native:  from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114. The following versions were EOL at the time the CVE was created but are known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected. Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue. Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue.Show less

Improper Input Validation vulnerability in Apache Tomcat. Tomcat did not limit HTTP/0.9 requests to the GET method. If a security constraint was configured to allow HEAD requests to a URI but deny GET requests, the user could bypass that constraint on GET requests by sending a (specification invalid) HEAD request using HTTP/0.9. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0.M1 through 9.0.112. Older, EOL versions are also affected. Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fixes the issue.Show less

Improper Input Validation vulnerability. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected. Tomcat did not validate that the host name provided via the SNI extension was the same as the host name provided in the HTTP host header field. If Tomcat was configured with more than one virtual host and the TLS configuration for one of those hosts did not require client certificate authentication but another one did, it was possible for a client to bypass the client certificate authentication by sending different host names in the SNI extension and the HTTP host header field. The vulnerability only applies if client certificate authentication is only enforced at the Connector. It does not apply if client certificate authentication is enforced at the web application. Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue.Show less

A weakness has been identified in JeecgBoot 3.9.1. This vulnerability affects the function importDocumentFromZip of the file org/jeecg/modules/airag/llm/controller/AiragKnowledgeController.java of the component Retrieval-Augmented Generation. Executing a manipulation can lead to deserialization. The attack can be launched remotely. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. The project was informed of the problem early through an issue report but has not responded yet.Show less

An improper input validation and protocol compliance vulnerability in free5GC v4.0.1 allows remote attackers to cause a denial of service. The UPF incorrectly accepts a malformed PFCP Association Setup Request, violating 3GPP TS 29.244. This places the UPF in an inconsistent state where a subsequent valid PFCP Session Establishment Request triggers a cascading failure, disrupting the SMF connection and causing service degradation.Show less

### Summary The `arrayLimit` option in qs does not enforce limits for comma-separated values when `comma: true` is enabled, allowing attackers to cause denial-of-service via memory exhaustion. This is a bypass of the array limit enforcement, similar to the bracket notation bypass addressed in GHSA-6rw7-vpxm-498p (CVE-2025-15284). ### Details When the `comma` option is set to `true` (not the default, but configurable in applications), qs allows parsing comma-separated strings as arrays (e.g., `?param=a,b,c` becomes `['a', 'b', 'c']`). However, the limit check for `arrayLimit` (default: 20) and the optional throwOnLimitExceeded occur after the comma-handling logic in `parseArrayValue`, enabling a bypass. This permits creation of arbitrarily large arrays from a single parameter, leading to excessive memory allocation. **Vulnerable code** (lib/parse.js: lines ~40-50): ```js if (val && typeof val === 'string' && options.comma && val.indexOf(',') > -1) {     return val.split(','); } if (options.throwOnLimitExceeded && currentArrayLength >= options.arrayLimit) {     throw new RangeError('Array limit exceeded. Only ' + options.arrayLimit + ' element' + (options.arrayLimit === 1 ? '' : 's') + ' allowed in an array.'); } return val; ``` The `split(',')` returns the array immediately, skipping the subsequent limit check. Downstream merging via `utils.combine` does not prevent allocation, even if it marks overflows for sparse arrays.This discrepancy allows attackers to send a single parameter with millions of commas (e.g., `?param=,,,,,,,,...`), allocating massive arrays in memory without triggering limits. It bypasses the intent of `arrayLimit`, which is enforced correctly for indexed (`a[0]=`) and bracket (`a[]=`) notations (the latter fixed in v6.14.1 per GHSA-6rw7-vpxm-498p). ### PoC **Test 1 - Basic bypass:** ``` npm install qs ``` ```js const qs = require('qs'); const payload = 'a=' + ','.repeat(25); // 26 elements after split (bypasses arrayLimit: 5) const options = { comma: true, arrayLimit: 5, throwOnLimitExceeded: true }; try {   const result = qs.parse(payload, options);   console.log(result.a.length); // Outputs: 26 (bypass successful) } catch (e) {   console.log('Limit enforced:', e.message); // Not thrown } ``` **Configuration:** - `comma: true` - `arrayLimit: 5` - `throwOnLimitExceeded: true` Expected: Throws "Array limit exceeded" error. Actual: Parses successfully, creating an array of length 26. ### Impact Denial of Service (DoS) via memory exhaustion.Show less

An issue existed in the handling of environment variables. This issue was addressed with improved validation. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, visionOS 26.3, watchOS 26.3. An app may be able to access sensitive user data.Show less