Use of Default Password

A potential security vulnerability has been identified in the Poly Clariti Manager for versions prior to 10.12.1. The vulnerability could allow the use and retrieval of the default password. HP has addressed the issue in the latest software update.Show less

70mai A510 Use of Default Password Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of 70mai A510. Authentication is not required to exploit this vulnerability. The specific flaw exists within the default configuration of user accounts. The configuration contains default password. An attacker can leverage this vulnerability to bypass authentication and execute arbitrary code in the context of the root. Was ZDI-CAN-24996.Show less

ZKTeco BioTime allows unauthenticated attackers to enumerate usernames and log in as any user with a password unchanged from the default value '123456'. Users should change their passwords (located under the Attendance Settings tab as "Self-Password").Show less

Dell PowerScale OneFS, versions 9.5.0.0 through 9.10.1.0, contains a use of default password vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to the takeover of a high privileged user account.Show less

A vulnerability classified as critical has been found in Netis WF-2404 1.1.124EN. Affected is an unknown function of the file /etc/passwd. The manipulation with the input Realtek leads to use of default password. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

Dell SmartFabric OS10 Software, version(s) 10.5.4.x, 10.5.5.x, 10.5.6.x, 10.6.0.x, contain(s) an Use of Default Password vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.Show less

A vulnerability was found in IROAD Dash Cam FX2 up to 20250308 and classified as problematic. This issue affects some unknown processing of the component Device Registration. The manipulation of the argument Password with the input qwertyuiop leads to use of default password. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used.Show less

An issue was discovered in Percona PMM Server (OVA) before 3.0.0-1.ova. The default service account credentials can lead to SSH access, use of Sudo to root, and sensitive data exposure. This is fixed in PMM2 2.42.0-1.ova, 2.43.0-1.ova, 2.43.1-1.ova, 2.43.2-1.ova, and 2.44.0-1.ova and in PMM3 3.0.0-1.ova and later.Show less

A vulnerability has been found in i-Drive i11 and i12 up to 20250227 and classified as problematic. This vulnerability affects unknown code of the component WiFi. The manipulation leads to use of default password. Access to the local network is required for this attack to succeed. The complexity of an attack is rather high. The exploitation appears to be difficult. It was not possible to identify the current maintainer of the product. It must be assumed that the product is end-of-life.Show less

The Web GUI configuration panel of Hirsch (formerly Identiv and Viscount) Enterphone MESH through 2024 ships with default credentials (username freedom, password viscount). The administrator is not prompted to change these credentials on initial configuration, and changing the credentials requires many steps. Attackers can use the credentials over the Internet via mesh.webadmin.MESHAdminServlet to gain access to dozens of Canadian and U.S. apartment buildings and obtain building residents' PII. NOTE: the Supplier's perspective is that the "vulnerable systems are not following manufacturers' recommendations to change the default password."Show less

After gaining access to the firmware of a charging station, a file at <redacted> can be accessed to obtain default credentials that are the same across all Iocharger AC model EV chargers. This issue affects Iocharger firmware for AC models before firmware version 25010801. The issue is addressed by requiring a mandatory password change on first login, it is still recommended to change the password on older models. Likelihood: Moderate – The attacker will first have to abuse a code execution or file inclusion vulnerability (for example by using <redacted>.sh) to gain access to the <redacted>.json file, or obtain a firmware dump of the charging station or obtain the firmware via other channels. Impact: Critical – All chargers using Iocharger firmware for AC models started with the same initial password. For models with firmware version before 25010801 a password change was not mandatory. It is therefore very likely that this firmware password is still active on many chargers. These credentials could, once obtained, allow an attacker to log into many Iocharger charging station, and allow them to execute arbitrary commands via the System → Custom page. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, and requires high privileges (PR:H), there is no user interaction required (UI:N). The attack leads to a compromised of the confidentialy of the "super user" credentials of the device (VC:H/VI:N/VA:N), and can subsequently be used to full compromise and other devices (SC:H/SI:H/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).Show less

Default Credentail vulnerabilities allows access to an Aspect device using publicly available default credentials since the system does not require the installer to change default credentials.  Affected products: ABB ASPECT - Enterprise v3.07.02; NEXUS Series v3.07.02; MATRIX Series v3.07.02Show less

An unauthenticated attacker with access to the local network of the medical office can use known default credentials to gain remote DBA access to the Elefant Firebird database. The data in the database includes patient data and login credentials among other sensitive data. In addition, this enables an attacker to create and overwrite arbitrary files on the server filesystem with the rights of the Firebird database ("NT AUTHORITY\SYSTEM").Show less

Snipe-IT before 7.0.10 allows remote code execution (associated with cookie serialization) when an attacker knows the APP_KEY. This is exacerbated by .env files, available from the product's repository, that have default APP_KEY values.Show less

An issue was discovered on Swissphone DiCal-RED 4009 devices. An attacker with access to the file /etc/deviceconfig may recover the administrative device password via password-cracking methods, because unsalted MD5 is used.Show less

Remote command execution due to use of default passwords. The following products are affected: Acronis Cyber Infrastructure (ACI) before build 5.0.1-61, Acronis Cyber Infrastructure (ACI) before build 5.1.1-71, Acronis Cyber Infrastructure (ACI) before build 5.2.1-69, Acronis Cyber Infrastructure (ACI) before build 5.3.1-53, Acronis Cyber Infrastructure (ACI) before build 5.4.4-132.Show less

Judge0 is an open-source online code execution system. The default configuration of Judge0 leaves the service vulnerable to a sandbox escape via Server Side Request Forgery (SSRF). This allows an attacker with sufficient access to the Judge0 API to obtain unsandboxed code execution as root on the target machine. This vulnerability is fixed in 1.13.1. Show less