Improper Validation of Array Index

MapServer is a system for developing web-based GIS applications. From 6.4.0 to before 8.6.3, msSLDParseUserStyle always calls _SLDApplyRuleValues(psRule, psLayer, 1); for any <Rule> carrying <ElseFilter/> — it assumes msSLDParseRule added one class. When the rule has no symbolizer (a structurally valid SLD), msSLDParseRule adds zero, and _SLDApplyRuleValues ends up indexing _class[-1], resulting in a NULL pointer dereference. A 200-byte well-formed SLD via the WMS SLD_BODY= parameter is enough to trigger this, no auth required. This vulnerability is fixed in 8.6.3.Show less

Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0.Show less

Improper validation in Power Management Firmware (PMFW) may allow an attacker with privileges to pass malformed workload arguments when exporting table data from SMU to DRAM potentially resulting in a loss of confidentiality and/or availability.Show less

vLLM is an inference and serving engine for large language models (LLMs). From 0.6.1 to before 0.20.0, there is a a Token Injection vulnerability in vLLM’s multimodal processing. Unauthenticated, text-only prompts that spell special tokens are interpreted as control. Image and video placeholder sequences supplied without matching data cause vLLM to index into empty grids during input-position computation, raising an unhandled IndexError and terminating the worker or degrading availability. Multimodal paths that rely on image_grid_thw/video_grid_thw are affected. This vulnerability is fixed in 0.20.0.Show less

GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.3.0, a remote Denial of Service (DoS) vulnerability exists in GoBGP where a malformed BGP UPDATE message can trigger a runtime error: index out of range panic. This occurs during the processing of 4-byte AS attributes when the message structure causes an internal slice index shift that is not properly handled. This issue has been patched in version 4.3.0.Show less

Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage volume import logic allows an authenticated user with access to the storage volume feature to cause the Incus daemon to crash. The backup restore subsystem contains an out-of-bounds panic vulnerability caused by an invalid bounds check when indexing snapshot metadata arrays, and the same flawed pattern also appears in the migration path. When iterating through physical snapshots provided in a backup archive, the loop uses the index to look up corresponding metadata in the parsed `Config.Snapshots` and `Config.VolumeSnapshots` slices. The guard condition `len(slice) >= i-1` is incorrect because it can still evaluate to true when the subsequent slice[i] access is out of bounds. An attacker can submit a backup archive that contains physical snapshot directories while supplying a tampered `index.yaml` with an empty or truncated snapshot metadata array, causing the daemon to index beyond the end of the metadata slice and crash. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix missing SPDIFI1 index handling SPDIF1 DAIO type isn't properly handled in daio_device_index() for hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds array access. Follow the hw20k1 pattern and return the proper index for this type, too.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further.Show less

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14.Show less

Step CA is an online certificate authority for secure, automated certificate management for DevOps. From 0.24.0 to before 0.30.0-rc3, an attacker can trigger an index out-of-bounds panic in Step CA by sending a crafted attestation key (AK) certificate with an empty Extended Key Usage (EKU) extension during TPM device attestation. When processing a device-attest-01 ACME challenge using TPM attestation, Step CA validates that the AK certificate contains the tcg-kp-AIKCertificate Extended Key Usage OID. During this validation, the EKU extension value is decoded from its ASN.1 representation and the first element is checked. A crafted certificate could include an EKU extension that decodes to an empty sequence, causing the code to panic when accessing the first element of the empty slice. This vulnerability is only reachable when a device-attest-01 ACME challenge with TPM attestation is configured. Deployments not using TPM device attestation are not affected. This vulnerability is fixed in 0.30.0-rc3.Show less

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.Show less

A heap-based buffer overflow vulnerability exists in the lossless_jpeg_load_raw functionality of LibRaw Commit 0b56545 and Commit d20315b. A specially crafted malicious file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.Show less

In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly.Show less

In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only.Show less

go-git is an extensible git implementation library written in pure Go. Prior to version 5.17.1, go-git’s index decoder for format version 4 fails to validate the path name prefix length before applying it to the previously decoded path name. A maliciously crafted index file can trigger an out-of-bounds slice operation, resulting in a runtime panic during normal index parsing. This issue only affects Git index format version 4. Earlier formats (go-git supports only v2 and v3) are not vulnerable to this issue. This issue has been patched in version 5.17.1.Show less