Out-of-bounds Read

A vulnerability was detected in Open Babel up to 3.1.1. The impacted element is the function OBAtom::SetFormalCharge in the library include/openbabel/atom.h of the component MOL2 File Handler. The manipulation results in out-of-bounds read. It is possible to launch the attack remotely. The exploit is now public and may be used. The patch is identified as e23a224b8fd9d7c2a7cde9ef4ec6afb4c05aa08a. A patch should be applied to remediate this issue. The project was informed of the problem early through an issue report but has not responded yet.Show less

A security vulnerability has been detected in Open Babel up to 3.1.1. The affected element is the function OpenBabel::transform3d::DescribeAsString of the file src/math/transform3d.cpp of the component CIF File Handler. The manipulation leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 3.2.0 is sufficient to fix this issue. The identifier of the patch is e23a224b8fd9d7c2a7cde9ef4ec6afb4c05aa08a. It is suggested to install a patch to address this issue.Show less

A weakness has been identified in FascinatedBox lily up to 2.3. This vulnerability affects the function count_transforms of the file src/lily_emitter.c. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.Show less

A vulnerability was determined in Squirrel up to 3.2. Affected by this vulnerability is the function SQFuncState::PopTarget of the file src/squirrel/squirrel/sqfuncstate.cpp. Executing a manipulation of the argument _target_stack can lead to out-of-bounds read. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode The local variable 'i' is initialized with -EINVAL, but the for loop immediately overwrites it and -EINVAL is never returned. If no empty compression mode can be found, the function would return the out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid array access in add_iaa_compression_mode(). Fix both issues by returning either a valid index or -EINVAL.Show less

A weakness has been identified in niklasso minisat up to 2.2.0. This issue affects the function Solver::value in the library core/SolverTypes.h of the component DIMACS File Parser. This manipulation of the argument variable index with the input 2147483648 causes out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.Show less

An Out-Of-Bounds Read vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221Show less

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early read unlock of page with EOF in middle The read result collection for buffered reads seems to run ahead of the completion of subrequests under some circumstances, as can be seen in the following log snippet: 9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0 ... netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0 ... netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2 netfs_folio: i=157f3 ix=00004-00004 read-done netfs_folio: i=157f3 ix=00004-00004 read-unlock netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2 netfs_folio: i=157f3 ix=00005-00005 read-done netfs_folio: i=157f3 ix=00005-00005 read-unlock ... netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8 ... netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0 netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0 The 'cto=5fb2' indicates the collected file pos we've collected results to so far - but we still have 0x4e more bytes to go - so we shouldn't have collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail happens after we unlock the folio, allowing the application to see the uncleared tail through mmap. The problem is that netfs_read_unlock_folios() will unlock a folio in which the amount of read results collected hits EOF position - but the ZERO subreq lies beyond that and so happens after. Fix this by changing the end check to always be the end of the folio and never the end of the file. In the future, I should look at clearing to the end of the folio here rather than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can run in parallel with an async READ subreq. Further, the ZERO subreq may still be necessary to, say, handle extents in a ceph file that don't have any backing store and are thus implicitly all zeros. This can be reproduced by creating a file, the size of which doesn't align to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something like: xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \ -c "mread -v 0 0x6000" /xfstest.test/x The last 0x4e bytes should all be 00, but if the tail hasn't been cleared yet, you may see rubbish there. This can be reproduced with kafs by modifying the kernel to disable the call to netfs_read_subreq_progress() and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD. Reproduction can be made easier by inserting an mdelay(100) in netfs_issue_read() for the ZERO-subreq case. AFS and CIFS are normally unlikely to show this as they dispatch READ ops asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is completely synchronous, so the ZERO-subreq will always happen after. It isn't seen all the time, though, because the collection may be done in a worker thread.Show less

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.5.0rc4 and 1.4.3rc2, a malformed WriteProperty request can trigger a length underflow in the BACnet stack, leading to an out‑of‑bounds read and a crash (DoS). The issue is in wp.c within wp_decode_service_request. When decoding the optional priority context tag, the code passes apdu_len - apdu_size to bacnet_unsigned_context_decode without validating that apdu_size <= apdu_len. If a truncated APDU reaches this path, apdu_len - apdu_size underflows, resulting in a large size being used for decoding and an out‑of‑bounds read. This vulnerability is fixed in 1.5.0rc4 and 1.4.3rc2.Show less

An array index out of bounds vulnerability in the AMF component of free5GC v4.0.1 allows remote attackers to cause a denial of service via a crafted 5GS Mobile Identity in a NAS Registration Request message. The issue occurs in the GetSUCI method (NAS_MobileIdentity5GS.go) when accessing index 5 of a 5-element array, leading to a runtime panic and AMF crash.Show less

A flaw was identified in libsoup, a widely used HTTP library in GNOME-based systems. When processing specially crafted HTTP Range headers, the library may improperly validate requested byte ranges. In certain build configurations, this could allow a remote attacker to access portions of server memory beyond the intended response. Exploitation requires a vulnerable configuration and access to a server using the embedded SoupServer component.Show less

The issue was addressed with improved bounds checks. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing a maliciously crafted image may lead to disclosure of user information.Show less

An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3. An attacker may be able to cause unexpected system termination or read kernel memory.Show less

An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing a maliciously crafted media file may lead to unexpected app termination or corrupt process memory.Show less

The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing a maliciously crafted file may lead to a denial-of-service or potentially disclose memory contents.Show less

An out-of-bounds read vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to obtain secret data. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and laterShow less

An out-of-bounds read vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to obtain secret data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5068 and laterShow less