Out-of-bounds Read

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length.Show less

In the Linux kernel, the following vulnerability has been resolved: vt: discard stale unicode buffer on alt screen exit after resize When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize() skips reallocating the unicode buffer because vc_uni_lines is NULL. However, vc_saved_uni_lines still points to the old buffer allocated for the original dimensions. When leave_alt_screen() later restores vc_saved_uni_lines, the buffer dimensions no longer match vc_rows/vc_cols. Any operation that iterates over the unicode buffer using the current dimensions (e.g. csi_J clearing the screen) will access memory out of bounds, causing a kernel oops: BUG: unable to handle page fault for address: 0x0000002000000020 RIP: 0010:csi_J+0x133/0x2d0 The faulting address 0x0000002000000020 is two adjacent u32 space characters (0x20) interpreted as a pointer, read from the row data area past the end of the 25-entry pointer array in a buffer allocated for 80x25 but accessed with 240x67 dimensions. Fix this by checking whether the console dimensions changed while in the alternate screen. If they did, free the stale saved buffer instead of restoring it. The unicode screen will be lazily rebuilt via vc_uniscr_check() when next needed.Show less

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds.Show less

In Exim before 4.99.2, when utf8 operators are enabled, there is an out-of-bounds read if large UTF-8 trailing characters are present (malformed UTF-8 header data). Information might be divulged within an error message produced during handling of an unrelated e-mail message.Show less

CVE-2026-33451 is an arbitrary read/write vulnerability in the Secure Access Windows client prior to 14.50. Attackers with local control of the Windows client can send malformed data to an API and elevate their level of privilege to system.Show less

CVE-2026-33450 is an out of bounds read vulnerability in the Secure Access MacOS client prior to 14.50. Attackers with control of a modified server can send a malformed packet to the client causing a denial of service.Show less

FRRouting before 10.5.3 contains an integer overflow vulnerability in seven OSPF Traffic Engineering and Segment Routing TLV parser functions where a uint16_t accumulator variable truncates uint32_t values returned by the TLV_SIZE() macro, causing the loop termination condition to fail while pointer advancement continues unchecked. Attackers with an established OSPF adjacency can send a crafted LS Update packet with a malicious Type 10 or Type 11 Opaque LSA to trigger out-of-bounds memory reads and crash all affected routers in the OSPF area or autonomous system.Show less

Out-of-bounds read vulnerability in ASR Kestrel (nr_fw modules) allows Overflow Buffers. This vulnerability is associated with program files Code/Nr/nr_fw/RA/src/NrPwrCtrl.C. This issue affects Kestrel: before 2026/02/10.Show less

Insufficient option length validation in the IPv6 Router Advertisement parser in FreeRTOS-Plus-TCP before V4.2.6 and V4.4.1 allows an adjacent network actor to cause a denial of service (device crash) by sending a crafted Router Advertisement with a truncated PREFIX_INFORMATION option that is smaller than the expected structure size. To mitigate this issue, users should upgrade to the fixed version when available.Show less

Netskope was notified about a potential gap in the Endpoint DLP Module for Netskope Client on Windows systems. The successful exploitation of the gap can potentially allow an unprivileged user to trigger an out-of-bounds read within a driver, leading to a Blue-Screen-of-Death (BSOD). Successful exploitation would require the Endpoint DLP module to be enabled in the client configuration. A successful exploit can potentially result in a denial-of-service for the local machine.Show less

Information disclosure due to incorrect boundary conditions in the Audio/Video component. This vulnerability was fixed in Firefox 150.0.1, Firefox ESR 140.10.1, Firefox ESR 115.35.1, Thunderbird 150.0.1, and Thunderbird 140.10.1.Show less

A vulnerability was determined in Artifex MuPDF up to 1.28.0. The impacted element is the function fz_subset_cff_for_gids of the file subset-cff.c of the component CFF Index Handler. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through a bug report but has not responded yet.Show less

A security flaw has been discovered in GPAC up to 26.03-DEV-rev105-g8f39a1eb3-master. Affected by this vulnerability is the function elng_box_read of the file src/isomedia/box_code_base.c of the component MP4Box. Performing a manipulation of the argument elng results in out-of-bounds read. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The patch is named cf6ac48c972eaaee2af270adc3f36615325deb3e. The affected component should be upgraded.Show less

Memory safety bugs present in Firefox ESR 140.9, Thunderbird ESR 140.9, Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10.Show less

Memory safety bugs present in Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird ESR 140.9, Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150, Firefox ESR 115.35, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_netem: fix out-of-bounds access in packet corruption In netem_enqueue(), the packet corruption logic uses get_random_u32_below(skb_headlen(skb)) to select an index for modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0. Passing 0 to get_random_u32_below() takes the variable-ceil slow path which returns an unconstrained 32-bit random integer. Using this unconstrained value as an offset into skb->data results in an out-of-bounds memory access. Fix this by verifying skb_headlen(skb) is non-zero before attempting to corrupt the linear data area. Fully non-linear packets will silently bypass the corruption logic.Show less

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, an out-of-bounds read vulnerability in bacnet-stack's ReadPropertyMultiple service property decoder allows unauthenticated remote attackers to read past allocated buffer boundaries by sending an RPM request with a truncated property list. The vulnerability stems from rpm_decode_object_property() calling the deprecated decode_tag_number_and_value() function at src/bacnet/rpm.c:344, which accepts no buffer length parameter and reads blindly from whatever pointer it receives. A crafted BACnet/IP packet with a 1-byte property payload containing an extended tag marker (0xF9) causes the decoder to read 1 byte past the end of the buffer, leading to crashes on embedded BACnet devices. The vulnerability exists in src/bacnet/rpm.c and affects any deployment that enables the ReadPropertyMultiple confirmed service handler (enabled by default in the reference server). This vulnerability is fixed in 1.4.3.Show less