Out-of-bounds Read

In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit messageShow less

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array.Show less

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in symlink_data() Since smb2_check_message() returns success without length validation for the symlink error response, in symlink_data() it is possible for iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer only contains the base SMB2 header (64 bytes), accessing err->ErrorContextCount (at offset 66) or err->ByteCount later in symlink_data() will cause an out-of-bounds read.Show less

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: validate WMT event SKB length before struct access btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject unknown opcodes before ICRC processing Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs.Show less

In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read.Show less

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix slab-out-of-bounds access in auth message processing If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this.Show less

A flaw was found in Keycloak's ClientRegistrationAuth component. A remote unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with a malformed 'Authorization: Bearer' header to any client registration endpoint. This can lead to an ArrayIndexOutOfBoundsException, causing the server to return an HTTP 500 error and resulting in a Denial of Service (DoS) for the affected service.Show less

libusb before version 1.0.30 contains a one-byte out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that allows attackers to trigger a denial of service by supplying a malformed USB descriptor whose bLength equals size minus one, causing the bounds check to use the original buffer size instead of the remaining size. Attackers in virtualized environments with USB passthrough can supply crafted descriptors through libusb_get_active_interface_association_descriptors or libusb_get_interface_association_descriptors to read one byte past the end of the malloc allocation, resulting in a denial of service.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration.Show less

In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.comShow less

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize.Show less

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.Show less

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 </IRQ> Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common.Show less