Out-of-bounds Read

1-byte OOB heap read in wc_PKCS7_DecodeEnvelopedData via zero-length encrypted content. A vulnerability existed in wolfSSL 5.8.4 and earlier, where a 1-byte out-of-bounds heap read in wc_PKCS7_DecodeEnvelopedData could be triggered by a crafted CMS EnvelopedData message with zero-length encrypted content. Note that PKCS7 support is disabled by default.Show less

Out-of-bounds read in ALPN parsing due to incomplete validation. wolfSSL 5.8.4 and earlier contained an out-of-bounds read in ALPN handling when built with ALPN enabled (HAVE_ALPN / --enable-alpn). A crafted ALPN protocol list could trigger an out-of-bounds read, leading to a potential process crash (denial of service). Note that ALPN is disabled by default, but is enabled for these 3rd party compatibility features: enable-apachehttpd, enable-bind, enable-curl, enable-haproxy, enable-hitch, enable-lighty, enable-jni, enable-nginx, enable-quic.Show less

A flaw was found in libarchive. This heap out-of-bounds read vulnerability exists in the RAR archive processing logic due to improper validation of the LZSS sliding window size after transitions between compression methods. A remote attacker can exploit this by providing a specially crafted RAR archive, leading to the disclosure of sensitive heap memory information without requiring authentication or user interaction.Show less

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, the value of the mate reference id field was not validated. Later use of this value, for example when converting the data to SAM format, could result in the out of bounds array reads when looking up the corresponding reference name. If the array value obtained also happened to be a valid pointer, it would be interpreted as a string and an attempt would be made to write the data as part of the SAM record. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.Show less

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding CRAM records, the reference data is stored in a char array, and parts matching the alignment record sequence are copied over as necessary. Due to insufficient validation of the feature data series, it was possible to make the `cram_decode_seq()` function copy data from either before the start, or after the end of the stored reference either into the buffer used to store the output sequence for the cram record, or into the buffer used to build the SAM `MD` tag. This allowed arbitrary data to be leaked to the calling function. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.Show less

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, validation of the reference id field occurred too late, allowing two out of bounds reads to occur before the invalid data was detected. The bug does allow two values to be leaked to the caller, however as the function reports an error it may be difficult to exploit them. It is also possible that the program will crash due to trying to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.Show less

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: apparmor: validate DFA start states are in bounds in unpack_pdb Start states are read from untrusted data and used as indexes into the DFA state tables. The aa_dfa_next() function call in unpack_pdb() will access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds the number of states in the DFA, this results in an out-of-bound read. ================================================================== BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360 Read of size 4 at addr ffff88811956fb90 by task su/1097 ... Reject policies with out-of-bounds start states during unpacking to prevent the issue.Show less

In the Linux kernel, the following vulnerability has been resolved: nvme: fix memory allocation in nvme_pr_read_keys() nvme_pr_read_keys() takes num_keys from userspace and uses it to calculate the allocation size for rse via struct_size(). The upper limit is PR_KEYS_MAX (64K). A malicious or buggy userspace can pass a large num_keys value that results in a 4MB allocation attempt at most, causing a warning in the page allocator when the order exceeds MAX_PAGE_ORDER. To fix this, use kvzalloc() instead of kzalloc(). This bug has the same reasoning and fix with the patch below: https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/ Warning log: WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272 Modules linked in: CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216 Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0 RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0 RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001 R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000 R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620 FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0 Call Trace: <TASK> alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486 alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557 ___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598 __kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629 __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245 blkdev_pr_read_keys block/ioctl.c:456 [inline] blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730 blkdev_ioctl+0x299/0x700 block/ioctl.c:786 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583 x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb893d3108d Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001 </TASK>Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less

An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information.Show less