Out-of-bounds Read

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration.Show less

In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.comShow less

In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field.Show less

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize.Show less

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.Show less

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 </IRQ> Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common.Show less

In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the entry size ('esize') is retrieved from the log record without adequate bounds checking. Specifically, the code calculates the end of the entry ('e2') using: e2 = Add2Ptr(e1, esize); It then calculates the size for memmove using 'PtrOffset(e2, ...)', which subtracts the end pointer from the buffer limit. If 'esize' is maliciously large, 'e2' exceeds the used buffer size. This results in a negative offset which, when cast to size_t for memmove, interprets as a massive unsigned integer, leading to a heap buffer overflow. This commit adds a check to ensure that the entry size ('esize') strictly fits within the remaining used space of the index header before performing memory operations.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags.Show less

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix & Optimize table creation from possibly unaligned memory Source blob may come from userspace and might be unaligned. Try to optize the copying process by avoiding unaligned memory accesses. - Added Fixes tag - Added "Fix &" to description as this doesn't just optimize but fixes a potential unaligned memory access [jj: remove duplicate word "convert" in comment trigger checkpatch warning]Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).Show less

In the Linux kernel, the following vulnerability has been resolved: efi: Fix reservation of unaccepted memory table The reserve_unaccepted() function incorrectly calculates the size of the memblock reservation for the unaccepted memory table. It aligns the size of the table, but fails to account for cases where the table's starting physical address (efi.unaccepted) is not page-aligned. If the table starts at an offset within a page and its end crosses into a subsequent page that the aligned size does not cover, the end of the table will not be reserved. This can lead to the table being overwritten or inaccessible, causing a kernel panic in accept_memory(). This issue was observed when starting Intel TDX VMs with specific memory sizes (e.g., > 64GB). Fix this by calculating the end address first (including the unaligned start) and then aligning it up, ensuring the entire range is covered by the reservation.Show less

libusb before version 1.0.30 contains a NULL pointer dereference vulnerability that allows attackers to crash applications by supplying a malformed USB configuration descriptor where an interface claims bNumEndpoints greater than zero but is followed by a class-specific descriptor whose bLength exceeds the remaining buffer size, causing parse_interface() to return early without allocating the endpoint array. Attackers can exploit this flaw through libusb_get_active_config_descriptor or libusb_get_config_descriptor by providing crafted descriptors via virtualized USB passthrough, file-based descriptor parsing, or network sources, causing any application iterating over endpoints to dereference a NULL endpoint pointer and crash.Show less

In the Linux kernel, the following vulnerability has been resolved: ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec() KASAN reported a stack-out-of-bounds access in ima_appraise_measurement from is_bprm_creds_for_exec: BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0 Read of size 1 at addr ffffc9000160f940 by task sudo/550 The buggy address belongs to stack of task sudo/550 and is located at offset 24 in frame: ima_appraise_measurement+0x0/0x16a0 This frame has 2 objects: [48, 56) 'file' [80, 148) 'hash' This is caused by using container_of on the *file pointer. This offset calculation is what triggers the stack-out-of-bounds error. In order to fix this, pass in a bprm_is_check boolean which can be set depending on how process_measurement is called. If the caller has a linux_binprm pointer and the function is BPRM_CHECK we can determine is_check and set it then. Otherwise set it to false.Show less