In the Linux kernel, the following vulnerability has been resolved:
f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()
In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are rea...Show moreIn the Linux kernel, the following vulnerability has been resolved:
f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()
In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are read without holding sbi->sb_lock. If a concurrent
sysfs store modifies the extension list via f2fs_update_extension_list(),
the show path may read inconsistent count and array contents, potentially
leading to out-of-bounds access or displaying stale data.
Fix this by holding sb_lock around the entire extension list read
and format operation.Show less |
Dragonfly is an in-memory data store built for modern application workloads. Prior to 1.39.0, a crafted RESTORE payload triggers an out-of-bounds read in DragonflyDB's listpack collection loaders, crashing the entire ser...Show moreDragonfly is an in-memory data store built for modern application workloads. Prior to 1.39.0, a crafted RESTORE payload triggers an out-of-bounds read in DragonflyDB's listpack collection loaders, crashing the entire server process (SIGSEGV). Because DragonflyDB requires no authentication by default and RESTORE is a normal keyspace command, an unauthenticated remote attacker can crash the server with a single ~24-byte command — a remote, repeatable denial of service. This vulnerability is fixed in 1.39.0.Show less |
Unauthenticated remote information disclosure vulnerability in Ollama's model quantization engine allows an attacker to read and exfiltrate the server's heap memory, potentially leading to sensitive data exposure, furthe...Show moreUnauthenticated remote information disclosure vulnerability in Ollama's model quantization engine allows an attacker to read and exfiltrate the server's heap memory, potentially leading to sensitive data exposure, further compromise, and stealthy persistence.Show less |
Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key withou...Show moreOut-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).Show less |
RTKLIB through 2.4.3 contains an out-of-bounds read vulnerability in getcodepri function when processing unrecognized RINEX observation codes, allowing attackers to trigger denial of service. Crafted RINEX files with unk...Show moreRTKLIB through 2.4.3 contains an out-of-bounds read vulnerability in getcodepri function when processing unrecognized RINEX observation codes, allowing attackers to trigger denial of service. Crafted RINEX files with unknown observation types cause negative array indexing into the codepris table, resulting in reliable crashes and potential memory disclosure of adjacent global data.Show less |
Horner Automation Cscape versions prior to 10.2 SP3 are vulnerable to an Out-of-Bounds Read vulnerability through parsing CSP files. Successful exploitation of this vulnerability could allow an attacker to disclose infor...Show moreHorner Automation Cscape versions prior to 10.2 SP3 are vulnerable to an Out-of-Bounds Read vulnerability through parsing CSP files. Successful exploitation of this vulnerability could allow an attacker to disclose information and execute arbitrary code.Show less |
Heap buffer overread in wc_PKCS7_DecodeEnvelopedData when parsing crafted PKCS7 EnvelopedData. This could theoretically be triggered by attacker-supplied data delivered via S/MIME or CMS. |
Vim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restor...Show moreVim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restores or displays such a line it converts the offset into a pointer and reads the virtual text without bounds checking, causing an out-of-bounds read that can crash Vim or disclose adjacent heap memory. This vulnerability is fixed in 9.2.0679.Show less |
Vim is an open source, command line text editor. Prior to 9.2.0671, when Vim opens a file encrypted with the VimCrypt~04! or VimCrypt~05!
method (xchacha20poly1305, requires the +sodium feature) whose body is shorter tha...Show moreVim is an open source, command line text editor. Prior to 9.2.0671, when Vim opens a file encrypted with the VimCrypt~04! or VimCrypt~05!
method (xchacha20poly1305, requires the +sodium feature) whose body is shorter than a single libsodium secretstream header, an unsigned length calculation underflows and a subsequent decryption call reads far past the end of the input buffer, crashing Vim. This vulnerability is fixed in 9.2.0671.Show less |
Vim is an open source, command line text editor. Prior to 9.2.0670, get_text_props() in src/textprop.c reads a uint16 property count stored inline after a line's text and returns it as the number of 32-byte textprop_T en...Show moreVim is an open source, command line text editor. Prior to 9.2.0670, get_text_props() in src/textprop.c reads a uint16 property count stored inline after a line's text and returns it as the number of 32-byte textprop_T entries that follow. The only check is a floor that guarantees room for a single entry; the count is never checked against the amount of data actually present. A line that declares a large count while carrying little data causes consumers to read far past the end of the line buffer. Such a line can be delivered through a crafted undo file, leading to a crash. This vulnerability is fixed in 9.2.0670.Show less |
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::NodeSet#[] (and its alias #slice) checked the requested index against the node set's bounds using a 32-bi...Show moreNokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::NodeSet#[] (and its alias #slice) checked the requested index against the node set's bounds using a 32-bit-truncated copy of the index. A large negative index could pass the check and then be used at full width, reading outside the node set's storage. On CRuby this is an out-of-bounds read that typically crashes the process; on JRuby it is not memory-unsafe but returns an incorrect node. This vulnerability is fixed in 1.19.4.Show less |
In EmberZNet v9.0.2 and earlier, malformed global ZCL messages can trigger out-of-bounds reads in framework parsing logic and terminate the process. These messages must come from a device that has already joined the netw...Show moreIn EmberZNet v9.0.2 and earlier, malformed global ZCL messages can trigger out-of-bounds reads in framework parsing logic and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed.Show less |
In EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already...Show moreIn EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Simple Metering cluster may be impacted.Show less |
In EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the ne...Show moreIn EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Door Lock cluster may be impacted.Show less |
In EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joi...Show moreIn EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Groups cluster may be impacted.Show less |
In EmberZNet v9.0.2 and earlier, malformed OTA requests can drive the OTA server parser into out-of-bounds reads. A limited amount of data from RAM is read back to the requester. The size and location of this data is lim...Show moreIn EmberZNet v9.0.2 and earlier, malformed OTA requests can drive the OTA server parser into out-of-bounds reads. A limited amount of data from RAM is read back to the requester. The size and location of this data is limited. These requests must come from a device that has already joined the network. Only devices supporting the OTA Server cluster may be impacted.Show less |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack_irc: fix possible out-of-bounds read
When parsing fails after we've matched the command string we
should bail out instead of tryi...Show moreIn the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack_irc: fix possible out-of-bounds read
When parsing fails after we've matched the command string we
should bail out instead of trying to match a different command.
This helper should be deprecated, given prevalence of TLS I doubt it has
any relevance in 2026.Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1].Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1.Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and,...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)Show less |