Out-of-bounds Read

In the Linux kernel, the following vulnerability has been resolved: tls: handle data disappearing from under the TLS ULP TLS expects that it owns the receive queue of the TCP socket. This cannot be guaranteed in case the reader of the TCP socket entered before the TLS ULP was installed, or uses some non-standard read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy early exit (which leaves anchor pointing to a freed skb) with real error handling. Wipe the parsing state and tell the reader to retry. We already reload the anchor every time we (re)acquire the socket lock, so the only condition we need to avoid is an out of bounds read (not having enough bytes in the socket for previously parsed record len). If some data was read from under TLS but there's enough in the queue we'll reload and decrypt what is most likely not a valid TLS record. Leading to some undefined behavior from TLS perspective (corrupting a stream? missing an alert? missing an attack?) but no kernel crash should take place.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible OOB access in mt7996_tx() Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is set to IEEE80211_LINK_UNSPECIFIEDShow less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use hdev->dump.head. However, dev_coredumpv can free the buffer. From dev_coredumpm_timeout documentation, which is used by dev_coredumpv: > Creates a new device coredump for the given device. If a previous one hasn't > been read yet, the new coredump is discarded. The data lifetime is determined > by the device coredump framework and when it is no longer needed the @free > function will be called to free the data. If the data has not been read by the userspace yet, dev_coredumpv will discard new buffer, freeing hdev->dump.head. This leads to vmalloc-out-of-bounds error when skb_put_data tries to access hdev->dump.head. A crash report from syzbot illustrates this: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in skb_put_data include/linux/skbuff.h:2752 [inline] BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258 Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844 CPU: 1 UID: 0 PID: 5844 Comm: kworker/u9:2 Not tainted 6.14.0-syzkaller-10892-g4e82c87058f4 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Workqueue: hci0 hci_devcd_timeout Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x23/0x60 mm/kasan/shadow.c:105 skb_put_data include/linux/skbuff.h:2752 [inline] hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258 hci_devcd_timeout+0xb5/0x2e0 net/bluetooth/coredump.c:413 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> The buggy address ffffc90004ed5000 belongs to a vmalloc virtual mapping Memory state around the buggy address: ffffc90004ed4f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90004ed4f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90004ed5000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90004ed5080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90004ed5100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== To avoid this issue, reorder dev_coredumpv to be called after skb_put_data that does not free the data.Show less

In the Linux kernel, the following vulnerability has been resolved: HID: core: Harden s32ton() against conversion to 0 bits Testing by the syzbot fuzzer showed that the HID core gets a shift-out-of-bounds exception when it tries to convert a 32-bit quantity to a 0-bit quantity. Ideally this should never occur, but there are buggy devices and some might have a report field with size set to zero; we shouldn't reject the report or the device just because of that. Instead, harden the s32ton() routine so that it returns a reasonable result instead of crashing when it is called with the number of bits set to 0 -- the same as what snto32() does.Show less

A flaw has been found in libretro RetroArch 1.18.0/1.19.0/1.20.0. This affects the function filestream_vscanf of the file libretro-common/streams/file_stream.c. This manipulation causes out-of-bounds read. The attack needs to be launched locally. Upgrading to version 1.21.0 mitigates this issue. It is recommended to upgrade the affected component.Show less

In Ashlar-Vellum Cobalt, Xenon, Argon, Lithium, and Cobalt Share versions prior to 12.6.1204.204, the affected applications lack proper validation of user-supplied data when parsing AR files. This could lead to an out-of-bounds read. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds read in smb2_sess_setup ksmbd does not consider the case of that smb2 session setup is in compound request. If this is the second payload of the compound, OOB read issue occurs while processing the first payload in the smb2_sess_setup().Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bound read in smb2_write ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If ->NextCommand is bigger than Offset + Length of smb2 write, It will allow oversized smb2 write length. It will cause OOB read in smb2_write.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: pcl812: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: aio_iiro_16: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps.Show less

A maliciously crafted DGN file, when linked or imported into Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.Show less

An issue was discovered in Malwarebytes 4.6.14.326 and before and 5.1.5.116 and before (and Nebula 2020-10-21 and later). An Out of bounds read in several disassembling utilities causes stability issues and denial of service.Show less

Netskope is notified about a potential gap in its agent (NS Client) in which a malicious actor could trigger a memory leak by sending a crafted DNS packet to a machine. A successful exploitation may require administrative privileges on the machine, based on the exact configuration. A successful exploit can potentially result in user-controllable memory being leaked in a domain name stored on the local machine.Show less

NGINX Open Source and NGINX Plus have a vulnerability in the ngx_mail_smtp_module that might allow an unauthenticated attacker to over-read NGINX SMTP authentication process memory; as a result, the server side may leak arbitrary bytes sent in a request to the authentication server. This issue happens during the NGINX SMTP authentication process and requires the attacker to make preparations against the target system to extract the leaked data. The issue affects NGINX only if (1) it is built with the ngx_mail_smtp_module, (2) the smtp_auth directive is configured with method "none," and (3) the authentication server returns the "Auth-Wait" response header. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.Show less

Dimension versions 4.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less

Adobe Framemaker versions 2020.8, 2022.6 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less