Out-of-bounds Read

odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3.Show less

A flaw was found in the iscsiuio component of open-iscsi. The IPv6 Neighbor Discovery handler accesses link-layer address options at a fixed offset without verifying the packet contains them. Additionally, the ARP table is updated unconditionally with attacker-controlled addresses from the packet headers. An attacker on the same network segment can send a minimal Neighbor Advertisement to poison the ARP table and redirect network traffic.Show less

A flaw was found in the iscsiuio component of open-iscsi. The DHCPv6 option parser calls strlen() on raw network data without ensuring a NUL terminator is present, causing it to read past the buffer into heap memory. This can result in a daemon crash, a 1-byte heap overwrite, or corruption of the iSCSI initiator name. An attacker on the same network segment can trigger this by sending a crafted DHCPv6 Advertise message.Show less

A flaw was found in the iscsiuio component of open-iscsi. The DHCPv4 option parser incorrectly calculates the length of the options data, causing it to read beyond the allocated buffer into adjacent heap memory. An attacker on the same network segment can send a crafted DHCP response to crash the daemon or corrupt its network configuration.Show less

A flaw was found in mod_qos. When inspecting HTTP response bodies, improper boundary checking can cause the module to read memory outside allocated buffer boundaries. An unauthenticated remote attacker can exploit this vulnerability by triggering specifically crafted server responses, causing an Apache worker process to crash and resulting in a Denial of Service (DoS).Show less

Pillow is a Python imaging library. Prior to 13.0.0 on Windows, src/PIL/WmfImagePlugin.py passes unchecked 32-bit WMF or EMF dimensions to the native drawwmf handler in src/display.c. The handler sizes a DIB allocation from 16-bit-truncated bcWidth and bcHeight fields but copies pixel data using the original full dimensions. A crafted wide, short metafile can pass the pixel-count decompression-bomb check and make the Windows-only renderer read beyond the heap buffer, potentially disclosing memory or crashing the process. This issue is fixed in version 13.0.0.Show less

Pillow is a Python imaging library. From 11.0.0 until 13.0.0, multi-frame loaders can retain an ImagingCore allocation created for a narrow frame mode while a later frame of the same dimensions changes the logical mode and decoder tiles to wider RGB or CMYK data. ImageFile.load_prepare() reuses the stale native storage because _im is non-null without verifying that its mode and size still match. Crafted PSD, MPO, DCX, or MIC frame transitions can then write wider pixels into the narrow allocation, causing native out-of-bounds writes and crashes. The MPO path can also cause a native over-read and, in demonstrated runtime-specific profiles, command execution. This issue is fixed in version 13.0.0.Show less

The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.Show less

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.6, 43.7.3, 44.4.3, and 45.0.0-alpha.9, frame data received from the GPU process for macOS offscreen rendering was not fully validated by the main process. An attacker who had separately gained code execution in the GPU process could provide inconsistent frame geometry and cause the main process to read out-of-bounds memory while producing paint event images, disclosing memory or crashing the application. This issue is fixed in versions 42.11.6, 43.7.3, 44.4.3, and 45.0.0-alpha.9.Show less

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.6, 43.7.3, 44.4.3, and 45.0.0-alpha.9, frame data received from the GPU process for webContents.beginFrameSubscription was not fully validated by the main process. An attacker who had separately gained code execution in the GPU process could supply inconsistent frame geometry and cause the main process to read out-of-bounds memory while producing captured frame images, disclosing memory or crashing the application. This issue is fixed in versions 42.11.6, 43.7.3, 44.4.3, and 45.0.0-alpha.9.Show less

Out-of-bounds read in NTS extension field parsing in NTPsec ntpd 1.1.4 through 1.2.5 allows a remote attacker to crash the daemon via an NTS Authenticator and Encrypted Extension Fields (AEEF) field with an oversized nonce length.Show less

Out-of-bounds read in the Motorola Oncore refclock driver in NTPsec ntpd before 1.2.6 allows an attacker who controls the GPS receiver's serial data to crash ntpd or disclose memory via a PPS Control (@@Gc) reply with an out-of-range mode byte.Show less

The Discovery naming-service reply parser in Apache bRPC (versions < 1.18.0) calls RapidJSON object-only accessors (FindMember) on JSON values without first validating that those values are objects. A malformed Discovery response whose data/service members or instances list contain non-object entries (e.g. a bare integer) triggers the RapidJSON object-access precondition on the client, reading memory out of bounds and potentially crashing the bRPC client. Root Cause: In src/brpc/policy/discovery_naming_service.cpp, DiscoveryNamingService::GetServers() and DiscoveryNames::ListDiscoveryNodes() access JSON values with member functions on non-object values. RapidJSON only defines these operations for object types; invoking them on a non-object violates the class invariant and results in undefined behavior (out-of-bounds read), commonly crashing the process. Affected Scenarios: An operator-configured (or compromised) Discovery backend returns a malformed /discovery/nodes or /discovery/fetchs response whose data/service/instance entries are not JSON objects, crashing any bRPC client that refreshes its server list. How to Fix: 1. Upgrade bRPC to version 1.18.0 or later, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3533 The fix validates that the Discovery response data, per-service data, and instance entries are JSON objects (and skips non-object node/instance entries and rejects non-object data/service values) before calling member accessors.Show less

An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through  1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently. Root Cause: Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream. Affected Scenarios: A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3485 Note: The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed.Show less

Out-of-bounds reads in URL parsing and case-insensitive header lookup in Apache bRPC before version 1.18.0 on platforms where plain char is unsigned, such as ARM64, allow remote attackers to cause a process crash and denial of service by sending crafted input containing bytes with the high bit set. Root Cause: Two 256-entry lookup tables are accessed through pointers biased by 128 so that valid indices are in the range -128 to 127. Input bytes are promoted from plain char to int without first normalizing them to the signed-char range. On affected platforms, bytes in the range 0x80 to 0xFF therefore become indices 128 to 255 and read up to 127 bytes beyond the end of the underlying tables. Affected Scenarios: A remotely accessible bRPC HTTP server on an affected platform can reach the vulnerable URL lookup through an unauthenticated request URI containing a high-bit byte. The case-insensitive lookup is also reachable when untrusted header names are processed through APIs such as the HTTP/2 HPACK path. HTTP/1 header names containing high-bit bytes are rejected by the HTTP/1 parser before reaching the vulnerable lookup. Builds where plain char is signed, which commonly include x86_64 builds, are not affected by this issue. How to Fix: Choose one of the following options: 1. Upgrade Apache bRPC to version 1.18.0 or later. 2. Apply the patch from https://github.com/apache/brpc/pull/3376 . The fix normalizes lookup-table indices to the signed-char range before accessing the biased tables.Show less

Integer underflow and out-of-bounds read in the HTTP/2 server DATA frame parser in Apache bRPC allows an unauthenticated remote attacker to cause denial of service by sending a malformed DATA frame with the PADDED flag set and a zero-length payload. Root Cause: The HTTP/2 DATA frame handler computed the fragment size from the attacker-controlled payload length and, when the PADDED flag was present, decremented the fragment size before ensuring that the frame contained the mandatory pad length byte. A zero-length padded DATA frame could therefore underflow the unsigned fragment size and read the pad length byte past the end of the frame buffer. Affected Scenarios: Apache bRPC servers that accept HTTP/2 traffic are affected when a remote client can send crafted HTTP/2 frames to the server. HTTP/2 may be reached through cleartext h2c detection on an HTTP port or through TLS ALPN negotiation. How to Fix: (Choose one of the following options) 1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3325 Note: The fix validates that a padded DATA frame has enough payload bytes for the pad length field before decrementing the fragment size or reading the pad length byte. Malformed zero-length padded DATA frames are rejected with HTTP/2 FRAME_SIZE_ERROR.Show less

In Eclipse OpenJ9 versions up to 0.63.0, the JITServer component is vulnerable to denial of service due to improper boundary checks during protocol message and reply handling. An unauthenticated remote attacker or malicious JITServer can transmit malformed network payloads that cause out-of-bounds heap reads, immediately crashing the JITServer daemon or client JVM process via a segmentation fault (SIGSEGV).Show less

In Eclipse OpenJ9 versions prior to 0.63.0, the JITServer component fails to perform cross-field validation on attacker-controlled `_size`, `_paddingSize`, and `_dataOffset` fields during `DataDescriptor` message deserialization. An unauthenticated remote attacker can send a crafted network payload that triggers an unsigned integer underflow in `DataDescriptor::getPayloadSize()` and `DataDescriptor::getNextDescriptor()`. This results in an out-of-bounds heap read and an immediate process crash (SIGSEGV), causing a denial of service.Show less

A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service.Show less

FreeRDP before 3.32.1 contains a heap out-of-bounds read vulnerability in the Android client that allows malicious RDP servers to read beyond surface buffers by supplying unvalidated mappedWidth and mappedHeight values. Attackers can send a crafted RDPGFX_MAP_SURFACE_TO_WINDOW_PDU with oversized dimensions, causing android_UpdateWindowFromSurface to copy heap memory beyond the allocation, leading to crashes or memory disclosure.Show less