Stack-based Buffer Overflow

EVerest is an EV charging software stack. Prior to version 2026.02.0, `HomeplugMessage::setup_payload` trusts `len` after an `assert`; in release builds the check is removed, so oversized SLAC payloads are `memcpy`'d into a ~1497-byte stack buffer, corrupting the stack and enabling remote code execution from network-provided frames. Version 2026.02.0 contains a patch.Show less

A weakness has been identified in Wavlink WL-NU516U1 260227. This vulnerability affects the function ftext of the file /cgi-bin/nas.cgi. This manipulation of the argument Content-Length causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.Show less

Each RPCSEC_GSS data packet is validated by a routine which checks a signature in the packet. This routine copies a portion of the packet into a stack buffer, but fails to ensure that the buffer is sufficiently large, and a malicious client can trigger a stack overflow. Notably, this does not require the client to authenticate itself first. As kgssapi.ko's RPCSEC_GSS implementation is vulnerable, remote code execution in the kernel is possible by an authenticated user that is able to send packets to the kernel's NFS server while kgssapi.ko is loaded into the kernel. In userspace, applications which have librpcgss_sec loaded and run an RPC server are vulnerable to remote code execution from any client able to send it packets. We are not aware of any such applications in the FreeBSD base system.Show less

A stack-based buffer overflow vulnerability in the P2P API service in BS Producten Petcam with firmware 33.1.0.0818 allows unauthenticated attackers within network range to overwrite the instruction pointer and achieve Remote Code Execution (RCE) by sending a specially crafted HTTP request.Show less

ipmi-oem in FreeIPMI before 1.6.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers."Show less

Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. In versions prior to 0.12.3 and 0.13.0, code for client certificate verification imported the certificate chain sent by the client into a fixed size `gnutls_x509_crt_t x509[]` array without checking the number of certificates is less than or equal to the array size. `gnutls_x509_crt_t` is a `typedef` for a pointer to an opaque GnuTLS structure created using with `gnutls_x509_crt_init()` before importing certificate data into it, so no attacker-controlled data was written into the stack buffer, but writing a pointer after the last array element generally triggered a segfault, and could theoretically cause stack corruption otherwise (not observed in practice). Server configurations that do not use client certificates (`GnuTLSClientVerify ignore`, the default) are not affected. The problem has been fixed in version 0.12.3 by checking the length of the provided certificate chain and rejecting it if it exceeds the buffer length, and in version 0.13.0 by rewriting certificate verification to use `gnutls_certificate_verify_peers()`, removing the need for the buffer entirely. There is no workaround. Version 0.12.3 provides the minimal fix for users of 0.12.x who do not wish to upgrade to 0.13.0 yet.Show less

Freeciv21 is a free open source, turn-based, empire-building strategy game. Versions prior to 3.1.1 crash with a stack overflow when receiving specially-crafted packets. A remote attacker can use this to take down any public server. A malicious server can use this to crash the game on the player's machine. Authentication is not needed and, by default, logs do not contain any useful information. All users should upgrade to Freeciv21 version 3.1.1. Running the server behind a firewall can help mitigate the issue for non-public servers. For local games, Freeciv21 restricts connections to the current user and is therefore not affected.Show less

A vulnerability has been found in Tenda A15 15.13.07.13. The impacted element is the function UploadCfg of the file /cgi-bin/UploadCfg. The manipulation of the argument File leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.Show less

A flaw has been found in Belkin F9K1122 1.00.33. The affected element is the function formWISP5G of the file /goform/formWISP5G. Executing a manipulation of the argument webpage can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A weakness has been identified in D-Link DIR-513 1.10. The impacted element is the function formEasySetTimezone of the file /goform/formEasySetTimezone of the component boa. This manipulation of the argument curTime causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.Show less

A vulnerability was identified in Tenda F453 1.0.0.3. Impacted is the function fromNatlimit of the file /goform/Natlimit of the component Parameters Handler. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.Show less

A vulnerability was determined in Tenda F453 1.0.0.3. This issue affects the function fromVirtualSer of the file /goform/VirtualSer of the component Parameters Handler. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.Show less

A vulnerability was found in Tenda F453 1.0.0.3. This vulnerability affects the function fromSafeClientFilter of the file /goform/SafeClientFilter of the component Parameters Handler. Performing a manipulation of the argument menufacturer/Go results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used.Show less

A vulnerability has been found in Tenda FH451 1.0.0.9. This vulnerability affects the function WrlclientSet of the file /goform/WrlclientSet. Such manipulation of the argument GO leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.Show less

A flaw has been found in Tenda FH451 1.0.0.9. This affects the function formWrlExtraSet of the file /goform/WrlExtraSet. This manipulation of the argument GO causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used.Show less

A vulnerability was identified in D-Link DHP-1320 1.00WWB04. This affects the function redirect_count_down_page of the component SOAP Handler. Such manipulation leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.Show less

GMT is an open source collection of command-line tools for manipulating geographic and Cartesian data sets. In versions from 6.6.0 and prior, a stack-based buffer overflow vulnerability was identified in the gmt_remote_dataset_id function within src/gmt_remote.c. This issue occurs when a specially crafted long string is passed as a dataset identifier (e.g., via the which module), leading to a crash or potential arbitrary code execution. This issue has been patched via commit 0ad2b49.Show less

A vulnerability was determined in Tenda A18 Pro 02.03.02.28. The impacted element is the function sub_423B50 of the file /goform/setMacFilterCfg of the component MAC Filtering Configuration Endpoint. Executing a manipulation of the argument deviceList can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.Show less

A vulnerability was found in Tenda A18 Pro 02.03.02.28. The affected element is the function set_qosMib_list of the file /goform/formSetQosBand. Performing a manipulation of the argument list results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used.Show less

A vulnerability has been found in Tenda A18 Pro 02.03.02.28. Impacted is the function fromSetIpMacBind of the file /goform/SetIpMacBind. Such manipulation of the argument list leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.Show less