Stack-based Buffer Overflow

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400v2 1.0.4.106_10.0.80 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. When parsing the uuid request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14110.Show less

A buffer overflow was reported in the local web server of some Motorola-branded Binatone Hubble Cameras that could allow an unauthenticated attacker on the same network to perform a denial-of-service attack against the device.Show less

A memory corruption vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to disrupt system processes and potentially execute arbitrary code with root privileges. The attacker must have network access to the GlobalProtect interface to exploit this issue. This issue impacts PAN-OS 8.1 versions earlier than PAN-OS 8.1.17. Prisma Access customers are not impacted by this issue.Show less

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.Show less

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:page parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13271.Show less

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:menu parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13270.Show less

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the webproc endpoint, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12104.Show less

In Point to MultiPoint (P2MP) scenarios within established sessions between network or adjacent neighbors the improper use of a source to destination copy write operation combined with a Stack-based Buffer Overflow on certain specific packets processed by the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved sent by a remote unauthenticated network attacker causes the RPD to crash causing a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1. Juniper Networks Junos OS Evolved 20.1 versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO.Show less

A local privilege escalation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to cause the Juniper DHCP daemon (jdhcpd) process to crash, resulting in a Denial of Service (DoS), or execute arbitrary commands as root. Continued processing of malicious input will repeatedly crash the system and sustain the Denial of Service (DoS) condition. Systems are only vulnerable if jdhcpd is running, which can be confirmed via the 'show system processes' command. For example: root@host# run show system processes extensive | match dhcp 26537 root -16 0 97568K 13692K RUN 0 0:01 3.71% jdhcpd This issue affects: Juniper Networks Junos OS: All versions, including the following supported releases: 15.1 versions prior to 15.1R7-S10; 17.4 versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO; All versions of 21.1-EVO.Show less

FATEK Automation WinProladder versions 3.30 and prior proper validation of user-supplied data when parsing project files, which could result in a stack-based buffer overflow. An attacker could leverage this vulnerability to execute arbitrary code.Show less

A stack-based buffer overflow vulnerability exists in the Palo Alto Networks GlobalProtect app that enables a man-in-the-middle attacker to disrupt system processes and potentially execute arbitrary code with SYSTEM privileges. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.9 on Windows; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.8 on Windows; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.8 on the Universal Windows Platform; GlobalProtect app 5.3 versions earlier than GlobalProtect app 5.3.1 on Linux.Show less

Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by a stack overflow vulnerability due to insecure handling of a crafted PDF file, potentially resulting in memory corruption in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted PDF file in Acrobat Reader.Show less

Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by a stack overflow vulnerability due to insecure handling of a crafted PDF file, potentially resulting in memory corruption in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted PDF file in Acrobat Reader.Show less

Delta Electronic DOPSoft 2 (Version 2.00.07 and prior) lacks proper validation of user-supplied data when parsing specific project files. This could lead to a stack-based buffer overflow while trying to copy to a buffer during font string handling. An attacker could leverage this vulnerability to execute code in the context of the current process.Show less