Stack-based Buffer Overflow

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Samsung Galaxy S10 Firmware G973FXXS3ASJA, O(8.x), P(9.0), Q(10.0) devices with Exynos chipsets. User interaction is required to exploit this vulnerability in that the target must answer a phone call. The specific flaw exists within the Call Control Setup messages. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the baseband processor. Was ZDI-CAN-9658.Show less

MessagePack for C# and Unity before version 1.9.11 and 2.1.90 has a vulnerability where untrusted data can lead to DoS attack due to hash collisions and stack overflow. Review the linked GitHub Security Advisory for more information and remediation steps.Show less

A Stack-based Buffer Overflow vulnerability in libbelkin_api.so component of Belkin WeMo Insight Switch firmware allows a local attacker to obtain code execution on the device. This issue affects: Belkin WeMo Insight Switch firmware version 2.00.11396 and prior versions.Show less

When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv6 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv6 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode.Show less

When a device using Juniper Network's Dynamic Host Configuration Protocol Daemon (JDHCPD) process on Junos OS or Junos OS Evolved which is configured in relay mode it vulnerable to an attacker sending crafted IPv4 packets who may then arbitrarily execute commands as root on the target device. This issue affects IPv4 JDHCPD services. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D60; 18.3 versions prior to 18.3R1-S6, 18.3R2-S2, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2*. and All versions prior to 19.3R1 on Junos OS Evolved. This issue do not affect versions of Junos OS prior to 15.1, or JDHCPD operating as a local server in non-relay mode.Show less

This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link DCS-960L v1.07.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction request header, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8458.Show less

In uftpd before 2.11, there is a buffer overflow vulnerability in handle_PORT in ftpcmd.c that is caused by a buffer that is 16 bytes large being filled via sprintf() with user input based on the format specifier string %d.%d.%d.%d. The 16 byte size is correct for valid IPv4 addresses (len('255.255.255.255') == 16), but the format specifier %d allows more than 3 digits. This has been fixed in version 2.11Show less

TigerVNC version prior to 1.10.1 is vulnerable to stack buffer overflow, which could be triggered from CMsgReader::readSetCursor. This vulnerability occurs due to insufficient sanitization of PixelFormat. Since remote attacker can choose offset from start of the buffer to start writing his values, exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.Show less

Multiple buffer overflow vulnerabilities exist when the PLC Editor Version 1.3.5_20190129 processes project files. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.Show less

In Advantech DiagAnywhere Server, Versions 3.07.11 and prior, multiple stack-based buffer overflow vulnerabilities exist in the file transfer service listening on the TCP port. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code with the privileges of the user running DiagAnywhere Server.Show less

Advantech WebAccess before 8.4.3 allows unauthenticated remote attackers to execute arbitrary code or cause a denial of service (memory corruption) due to a stack-based buffer overflow when handling IOCTL 70533 RPC messages.Show less

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 7061/tcp. This vulnerability is independent from CVE-2019-18311. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.Show less

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "identityref". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.Show less

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "bits". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.Show less

A stack-based buffer overflow was found in the Linux kernel, version kernel-2.6.32, in Marvell WiFi chip driver. An attacker is able to cause a denial of service (system crash) or, possibly execute arbitrary code, when a STA works in IBSS mode (allows connecting stations together without the use of an AP) and connects to another STA.Show less

A stack-based buffer overflow could be triggered in WhatsApp by sending a specially crafted MP4 file to a WhatsApp user. The issue was present in parsing the elementary stream metadata of an MP4 file and could result in a DoS or RCE. This affects Android versions prior to 2.19.274, iOS versions prior to 2.19.100, Enterprise Client versions prior to 2.25.3, Business for Android versions prior to 2.19.104 and Business for iOS versions prior to 2.19.100.Show less

TurboVNC server code contains stack buffer overflow vulnerability in commit prior to cea98166008301e614e0d36776bf9435a536136e. This could possibly result into remote code execution, since stack frame is not protected with stack canary. This attack appear to be exploitable via network connectivity. To exploit this vulnerability authorization on server is required. These issues have been fixed in commit cea98166008301e614e0d36776bf9435a536136e.Show less

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.6.0.25114. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the conversion of DXF files to PDF. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9276.Show less