CVE-2023-44183
5.3
Vector
CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H
Exploitability: 1.6 / Impact: 3.6
Source: NVD
Description
An Improper Input Validation vulnerability in the VxLAN packet forwarding engine (PFE) of Juniper Networks Junos OS on QFX5000 Series, EX4600 Series devices allows an unauthenticated, adjacent attacker, sending two or more genuine packets in the same VxLAN topology to possibly cause a DMA memory leak to occur under various specific operational conditions. The scenario described here is the worst-case scenario. There are other scenarios that require operator action to occur.
An indicator of compromise may be seen when multiple devices indicate that FPC0 has gone missing when issuing a show chassis fpc command for about 10 to 20 minutes, and a number of interfaces have also gone missing.
Use the following command to determine if FPC0 has gone missing from the device.
show chassis fpc detail
This issue affects:
Juniper Networks Junos OS on QFX5000 Series, EX4600 Series:
* 18.4 version 18.4R2 and later versions prior to 20.4R3-S8;
* 21.1 version 21.1R1 and later versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S4;
* 22.1 versions prior to 22.1R3-S3;
* 22.2 versions prior to 22.2R3-S1;
* 22.3 versions prior to 22.3R2-S2, 22.3R3;
* 22.4 versions prior to 22.4R2.
Affected (240)
Configuration A
| Vulnerable Software | Affected Versions |
|---|---|
| Version 18.4 r2-s10 |
| Running on/with | Platform Versions |
|---|---|
Juniper Ex4600 | All versions |
Juniper Ex4650 | All versions |
Juniper Qfk5110 | All versions |
Juniper Qfk5120 | All versions |
Juniper Qfk5130 | All versions |
Juniper Qfk5200 | All versions |
Juniper Qfk5210 | All versions |
Juniper Qfk5220 | All versions |
Juniper Qfk5230 | All versions |
Juniper Qfk5700 | All versions |
Related CWEs
CWE-20
Improper Input Validation
The product receives input or data, but it does
not validate or incorrectly validates that the input has the
properties that are required to process the data safely and
correctly.
CWE-401
Missing Release of Memory after Effective Lifetime
The product does not sufficiently track and release allocated memory after it has been used, which slowly consumes remaining memory.
References (6)
Source: sirt@juniper.net
Technical Description
Source: sirt@juniper.net
Technical Description
Source: af854a3a-2127-422b-91ae-364da2661108
Vendor Advisory
Source: af854a3a-2127-422b-91ae-364da2661108
Technical Description
Source: af854a3a-2127-422b-91ae-364da2661108
Technical Description
Timeline
No history available yet.