Vulnerabilities (CVE)

jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.21.0 until 2.21.4 and 3.1.4, POJOPropertiesCollector._renameProperties() allows a property with @JsonProperty("renamed") on the getter and @JsonIgnore on the setter to be renamed rather than dropped. With MapperFeature.INFER_PROPERTY_MUTATORS enabled (default), the private backing field is retained; during deserialization BeanDeserializerFactory.addBeanProps() sees hasField()==true, builds a FieldProperty, and makes the backing field writable. An attacker supplying the renamed JSON key writes the backing field directly, bypassing the @JsonIgnore on the setter. This vulnerability is fixed in 3.1.4.Show less

jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.8.0 until 2.18.9, 2.21.5, and 3.1.4, in BeanDeserializerBase.createContextual(), per-property @JsonIgnoreProperties exclusions are applied by _handleByNameInclusion(), producing a contextual deserializer whose BeanPropertyMap has the ignored properties removed. The subsequent per-property case-insensitivity block (triggered by @JsonFormat(ACCEPT_CASE_INSENSITIVE_PROPERTIES)) rebuilds from this._beanProperties (the original, unfiltered map) instead of contextual._beanProperties, then overwrites the filtered map — restoring every property _handleByNameInclusion had just removed. The ignored property becomes writable again. This vulnerability is fixed in 2.18.9, 2.21.5, and 3.1.4.Show less

jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.0.0 until 2.18.8, 2.21.4, and 3.1.4, JDKFromStringDeserializer constructed InetSocketAddress with new InetSocketAddress(host, port), which performs eager DNS name resolution for hostname inputs at deserialization time. An application that binds untrusted JSON into a type containing an InetSocketAddress field issues an attacker-chosen DNS query during readValue, before any application-level validation or connect logic. The fix uses InetSocketAddress.createUnresolved(host, port), deferring DNS to an explicit connect. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4.Show less

jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, BasicPolymorphicTypeValidator.Builder.allowIfSubTypeIsArray() allowlists any array type based only on clazz.isArray(), without validating the array's component (element) type against the configured allowlist. A PTV built with allowIfSubTypeIsArray() plus an explicit concrete-type allowlist therefore still permits EvilType[] even though EvilType is not allowlisted. When Jackson deserializes the elements and no per-element type IDs are present, it instantiates the component type directly with no further PTV check, bypassing the allowlist. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4.Show less

jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, jackson-databind's PolymorphicTypeValidator (PTV) is the primary safety mechanism guarding polymorphic deserialization. When polymorphic typing is enabled and a type identifier contains generic parameters (i.e. the type ID string contains <), DatabindContext._resolveAndValidateGeneric() validates only the raw container class name (the substring before <) against the configured PTV. If the container type is approved, the method parses the full canonical type string via TypeFactory.constructFromCanonical() and returns the fully parameterized type without ever validating the nested type arguments against the PTV. The nested type arguments are then resolved, instantiated, and populated as beans during deserialization. An attacker who controls the type ID can therefore place a denied class as a generic type parameter of an allowed container — for example java.util.ArrayList<com.evil.Gadget> when only java.util.ArrayList is allow-listed. The container passes the PTV check; com.evil.Gadget is loaded via Class.forName(name, true, loader), instantiated, and its properties are set from attacker-controlled JSON. This completely bypasses an explicitly configured PTV allow-list. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4.Show less

Pi is a minimal terminal coding harness. From 0.74.0 until 0.78.1, Pi versions with temporary npm or git extension package installs used predictable paths under the operating system temporary directory. On Linux-based multi-user systems, a local attacker who can write to the shared temporary directory could prepare the expected package location before another user runs pi with a temporary extension package source. Pi could then load attacker-controlled extension code in the victim user's process. This vulnerability is fixed in 0.78.1.Show less

Pi is a minimal terminal coding harness. From 0.74.0 until 0.78.1, Pi stored API keys and OAuth credentials in auth.json. A race condition in the file write path could briefly create or rewrite this file with permissions derived from the process umask before tightening the file to owner-only permissions. This vulnerability is fixed in 0.78.1.Show less

Pi is a minimal terminal coding harness. From 0.74.0 until 0.78.1, Pi HTML exports render session Markdown into a static HTML file. It did not consistently reject unsafe Markdown link and image URL schemes. In versions with scheme filtering, C0 control characters in the URL scheme could bypass the check because browsers normalize those characters before navigation. This vulnerability is fixed in 0.78.1.Show less

Pi is a minimal terminal coding harness. Pi before 0.79.0 loaded project-local configuration and resources from a repository's .pi directory without first asking the user to trust that repository. This included project-local extensions, which are executable TypeScript or JavaScript modules loaded into the Pi process. An attacker who controls a repository could place Pi-specific project resources in that repository. If a user then started Pi from that working tree, the project-local extension code could run with the same privileges as the local Pi process without the user having a convenient way to make a trust decision. This vulnerability is fixed in 0.79.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.185.0, a cross-tenant authorization flaw in Daytona's notification WebSocket gateway allowed any authenticated user to subscribe to another organization's realtime notification channel and passively receive that organization's events. This vulnerability is fixed in 0.185.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.185.0, the daemon's git clone implementation disabled TLS certificate verification. When a clone request carried Git credentials, the daemon sent the HTTP Basic Authorization header to the remote over a connection whose certificate was never validated, on both the go-git and native git CLI code paths. An attacker able to intercept clone traffic could present any TLS certificate, capture the Git credentials supplied for the clone, and serve tampered repository content into the sandbox. This vulnerability is fixed in 0.185.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.185.0, Daytona's organization role update and delete endpoints authorized the caller as an owner of the organization named in the request path, but resolved and mutated the target role by its identifier alone, without verifying the role belonged to that organization. An authenticated user who owns any organization (organizations are self-service) could therefore modify the permissions of, or delete, a role belonging to a different organization, given that role's identifier. This vulnerability is fixed in 0.185.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. From 0.101.0 until 0.184.0, sandbox previews that were switched from public to private could remain reachable without authentication for a short period after the change, due to a cached visibility state that was not invalidated when the sandbox's visibility changed. This vulnerability is fixed in 0.184.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.184.0, organization invitations could be accepted (and declined) by a user whose email matched the invitation but had not been verified. Daytona authenticates users via OIDC and matches an invitation's target email against the email in the caller's token, but the invitation accept and decline paths did not require that email to be verified, unlike organization creation, which already enforced verification. On identity providers that allow self-service signup and issue a session before the email is verified, an actor could register an address matching a pending invitation, leave it unverified, and accept the invitation, joining the target organization with the role the invitation carried (up to Owner). This vulnerability is fixed in 0.184.0.Show less

Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.186, a sandbox volume reference (volumeId, which may also be a volume name) was forwarded to the runner and used to build the host bind-mount source path without confinement. A reference containing path-traversal sequences could in principle resolve the mount source outside the intended per-volume base directory. This vulnerability is fixed in 0.186.Show less

Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2026.5.3, the LocationSensorManager BroadcastReceiver is exported with no permission. Any installed app, with zero runtime permissions, can broadcast a forged Google Play Services LocationResult directly to it; the receiver trusts the extra and forwards it to the user's Home Assistant server as the device's real location. This bypasses Android's developer-mode "Mock Location" gate and allows a local malicious app to drive zone-based automations (unlock door / disarm alarm / open garage) by faking the user's GPS position. This vulnerability is fixed in 2026.5.3.Show less

Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2026.6.0, the Konnected integration registers an HTTP endpoint, KonnectedView (homeassistant/components/konnected/__init__.py), that is marked as not requiring authentication (requires_auth = False). A comment next to that line says auth is instead handled "via the access token from configuration." That promise is only half true. Write requests (POST and PUT) are handled by update_sensor(), which does check the request's Authorization: Bearer <token> header against the integration's stored access tokens (using hmac.compare_digest). Read requests (GET) are handled by a separate get() method that has no authentication check at all. This vulnerability is fixed in 2026.6.0.Show less

Claude Code is an agentic coding tool. From 0.2.54 until 2.1.163, because the hostname huggingface.co was pre-approved as a bare hostname for the WebFetch tool, any path on that domain—including attacker-controlled model repositories—was auto-approved without a permission prompt or being subject to --allowedTools restrictions. An attacker able to inject untrusted content into a Claude Code context could direct it to issue WebFetch requests against attacker-controlled repository files (e.g. /resolve/main/config.json), which HuggingFace counts as downloads server-side, creating a covert out-of-band channel for encoding and exfiltrating data Claude can access such as files, environment variables, or command output. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 2.1.163.Show less

n8n is an open source workflow automation platform. Prior to 2.24.0, an authenticated user with workflow edit access could supply a malicious filter value in the MongoDB node's Find And Replace operation. The value was not validated before being passed to MongoDB as a query filter, allowing unintended documents to be matched and overwritten with attacker-controlled content. This vulnerability is fixed in 2.24.0.Show less

n8n is an open source workflow automation platform. Prior to 2.25.7 and 2.26.2, the MicrosoftAgent365Trigger and StripeTrigger node did not validate that inbound requests. As a result, an unauthenticated attacker who knows the webhook URL could submit a forged payload and cause the workflow to execute with attacker-controlled data. This vulnerability is fixed in 2.25.7 and 2.26.2.Show less

n8n is an open source workflow automation platform. Prior to 1.123.55, 2.25.7, and 2.26.2, a member-level user with editor access to a shared workflow could reference credentials they do not own via specific public API endpoints. Credential ownership checks were only enforced partially leading to cross-user credential access. This issue affects instances where workflow sharing is enabled and at least one workflow has been shared with a member-level user as an Editor. This vulnerability is fixed in 1.123.55, 2.25.7, and 2.26.2.Show less

n8n is an open source workflow automation platform. Prior to 2.25.7 and 2.26.2, a prototype pollution vulnerability allowed a crafted public webhook payload to inject attacker-controlled fields into workflow data during internal object copying. These fields could be surfaced and consumed as normal values by downstream built-in nodes. Where a workflow combines a public webhook with action nodes that consume the resulting fields, an attacker could cause the workflow to act as a confused deputy — targeting unintended records or issuing outbound requests using the workflow owner's configured credentials. This vulnerability is fixed in 2.25.7 and 2.26.2.Show less

n8n is an open source workflow automation platform. Prior to 1.123.55, 2.25.7, and 2.26.2, three EE endpoints used by the Dynamic Credentials feature accepted any authenticated n8n session without performing per-resource ownership or scope checks on the target workflow or credential. An authenticated user with no project membership or credential sharing relationship could enumerate credential identifiers, names, and types referenced by any private workflow in the instance, initiate an OAuth authorization flow against another user's credential to overwrite its stored tokens with tokens bound to an account they control, or revoke another user's stored credential tokens entirely. Workflows relying on a hijacked credential would subsequently execute under the attacker's OAuth identity, enabling data exfiltration to attacker-controlled external services and persistent takeover of integrations. Token revocation would break affected workflows. This vulnerability is fixed in 1.123.55, 2.25.7, and 2.26.2.Show less

@astrojs/netlify is an adapter that allows Astro to deploy your hybrid or server rendered site to Netlify. Prior to 7.0.13, @astrojs/netlify converts Astro image.remotePatterns into Netlify Image CDN images.remote_images regular expressions with broader semantics than Astro's canonical matcher. A single wildcard hostname such as *.example.com is converted to an optional subdomain regex, so the apex host matches. A single wildcard pathname such as /ok/* is converted without end anchoring, so deeper paths match by prefix. This vulnerability is fixed in 7.0.13.Show less

Astro is a web framework. Prior to 6.4.6, Astro SSR apps with prerendered error pages (/404 or /500 using export const prerender = true) fetch those pages over HTTP at runtime when an error occurs. The URL for this fetch is derived from request.url, which in turn gets its origin from the incoming Host header. When the Host header is not validated against allowedDomains, an attacker can point the fetch at an arbitrary host and read the response. This vulnerability is fixed in 6.4.6.Show less