Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues When running `test_sockmap` selftests, the following warning appears: WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xd28/0x1380 ? tcp_v4_do_rcv+0x77/0x2c0 tcp_v4_do_rcv+0x77/0x2c0 __release_sock+0x106/0x130 __tcp_close+0x1a7/0x4e0 tcp_close+0x20/0x70 inet_release+0x3c/0x80 __sock_release+0x3a/0xb0 sock_close+0x14/0x20 __fput+0xa3/0x260 task_work_run+0x59/0xb0 exit_to_user_mode_prepare+0x1b3/0x1c0 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root case is in commit 84472b436e76 ("bpf, sockmap: Fix more uncharged while msg has more_data"), where I used msg->sg.size to replace the tosend, causing breakage: if (msg->apply_bytes && msg->apply_bytes < tosend) tosend = psock->apply_bytes;Show less

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix undefined behavior in bit shift for CAP_TO_MASK Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix segmentation fault at module unload Move am65_cpsw_nuss_phylink_cleanup() call to after am65_cpsw_nuss_cleanup_ndev() so phylink is still valid to prevent the below Segmentation fault on module remove when first slave link is up. [ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4 [ 31.684627] Mem abort info: [ 31.687446] ESR = 0x0000000096000004 [ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.720663] SET = 0, FnV = 0 [ 31.723729] EA = 0, S1PTW = 0 [ 31.740617] FSC = 0x04: level 0 translation fault [ 31.756624] Data abort info: [ 31.759508] ISV = 0, ISS = 0x00000004 [ 31.776705] CM = 0, WnR = 0 [ 31.779695] [00040008000005f4] address between user and kernel address ranges [ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6 [ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160 [ 31.837547] Hardware name: Texas Instruments AM625 (DT) [ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.849709] pc : phy_stop+0x18/0xf8 [ 31.853202] lr : phylink_stop+0x38/0xf8 [ 31.857031] sp : ffff80000a0839f0 [ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000 [ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98 [ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90 [ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000 [ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106 [ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000 [ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0 [ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0 [ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920 [ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200 [ 31.931603] Call trace: [ 31.934042] phy_stop+0x18/0xf8 [ 31.937177] phylink_stop+0x38/0xf8 [ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss] [ 31.947452] __dev_close_many+0xa4/0x140 [ 31.951371] dev_close_many+0x84/0x128 [ 31.955115] unregister_netdevice_many+0x130/0x6d0 [ 31.959897] unregister_netdevice_queue+0x94/0xd8 [ 31.964591] unregister_netdev+0x24/0x38 [ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss] [ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss]Show less

In the Linux kernel, the following vulnerability has been resolved: serial: imx: Add missing .thaw_noirq hook The following warning is seen with non-console UART instance when system hibernates. [ 37.371969] ------------[ cut here ]------------ [ 37.376599] uart3_root_clk already disabled [ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 ... [ 37.506986] Call trace: [ 37.509432] clk_core_disable+0xa4/0xb0 [ 37.513270] clk_disable+0x34/0x50 [ 37.516672] imx_uart_thaw+0x38/0x5c [ 37.520250] platform_pm_thaw+0x30/0x6c [ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4 [ 37.528972] device_resume+0x7c/0x160 [ 37.532633] dpm_resume+0xe8/0x230 [ 37.536036] hibernation_snapshot+0x288/0x430 [ 37.540397] hibernate+0x10c/0x2e0 [ 37.543798] state_store+0xc4/0xd0 [ 37.547203] kobj_attr_store+0x1c/0x30 [ 37.550953] sysfs_kf_write+0x48/0x60 [ 37.554619] kernfs_fop_write_iter+0x118/0x1ac [ 37.559063] new_sync_write+0xe8/0x184 [ 37.562812] vfs_write+0x230/0x290 [ 37.566214] ksys_write+0x68/0xf4 [ 37.569529] __arm64_sys_write+0x20/0x2c [ 37.573452] invoke_syscall.constprop.0+0x50/0xf0 [ 37.578156] do_el0_svc+0x11c/0x150 [ 37.581648] el0_svc+0x30/0x140 [ 37.584792] el0t_64_sync_handler+0xe8/0xf0 [ 37.588976] el0t_64_sync+0x1a0/0x1a4 [ 37.592639] ---[ end trace 56e22eec54676d75 ]--- On hibernating, pm core calls into related hooks in sequence like: .freeze .freeze_noirq .thaw_noirq .thaw With .thaw_noirq hook being absent, the clock will be disabled in a unbalanced call which results the warning above. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_thaw clk_disable_unprepare() Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have the call sequence corrected as below and thus fix the warning. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_resume_noirq() clk_enable() imx_uart_thaw clk_disable_unprepare()Show less

In the Linux kernel, the following vulnerability has been resolved: sctp: clear out_curr if all frag chunks of current msg are pruned A crash was reported by Zhen Chen: list_del corruption, ffffa035ddf01c18->next is NULL WARNING: CPU: 1 PID: 250682 at lib/list_debug.c:49 __list_del_entry_valid+0x59/0xe0 RIP: 0010:__list_del_entry_valid+0x59/0xe0 Call Trace: sctp_sched_dequeue_common+0x17/0x70 [sctp] sctp_sched_fcfs_dequeue+0x37/0x50 [sctp] sctp_outq_flush_data+0x85/0x360 [sctp] sctp_outq_uncork+0x77/0xa0 [sctp] sctp_cmd_interpreter.constprop.0+0x164/0x1450 [sctp] sctp_side_effects+0x37/0xe0 [sctp] sctp_do_sm+0xd0/0x230 [sctp] sctp_primitive_SEND+0x2f/0x40 [sctp] sctp_sendmsg_to_asoc+0x3fa/0x5c0 [sctp] sctp_sendmsg+0x3d5/0x440 [sctp] sock_sendmsg+0x5b/0x70 and in sctp_sched_fcfs_dequeue() it dequeued a chunk from stream out_curr outq while this outq was empty. Normally stream->out_curr must be set to NULL once all frag chunks of current msg are dequeued, as we can see in sctp_sched_dequeue_done(). However, in sctp_prsctp_prune_unsent() as it is not a proper dequeue, sctp_sched_dequeue_done() is not called to do this. This patch is to fix it by simply setting out_curr to NULL when the last frag chunk of current msg is dequeued from out_curr stream in sctp_prsctp_prune_unsent().Show less

In the Linux kernel, the following vulnerability has been resolved: siox: fix possible memory leak in siox_device_add() If device_register() returns error in siox_device_add(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and sdevice is freed in siox_device_release(), set it to null in error path.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.Show less

In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map Here is the BUG report by KASAN about null pointer dereference: BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/drv: Fix potential memory leak in drm_dev_init() drm_dev_init() will add drm_dev_init_release() as a callback. When drmm_add_action() failed, the release function won't be added. As the result, the ref cnt added by device_get() in drm_dev_init() won't be put by drm_dev_init_release(), which leads to the memleak. Use drmm_add_action_or_reset() instead of drmm_add_action() to prevent memleak. unreferenced object 0xffff88810bc0c800 (size 2048): comm "modprobe", pid 8322, jiffies 4305809845 (age 15.292s) hex dump (first 32 bytes): e8 cc c0 0b 81 88 ff ff ff ff ff ff 00 00 00 00 ................ 20 24 3c 0c 81 88 ff ff 18 c8 c0 0b 81 88 ff ff $<............. backtrace: [<000000007251f72d>] __kmalloc+0x4b/0x1c0 [<0000000045f21f26>] platform_device_alloc+0x2d/0xe0 [<000000004452a479>] platform_device_register_full+0x24/0x1c0 [<0000000089f4ea61>] 0xffffffffa0736051 [<00000000235b2441>] do_one_initcall+0x7a/0x380 [<0000000001a4a177>] do_init_module+0x5c/0x230 [<000000002bf8a8e2>] load_module+0x227d/0x2420 [<00000000637d6d0a>] __do_sys_finit_module+0xd5/0x140 [<00000000c99fc324>] do_syscall_64+0x3f/0x90 [<000000004d85aa77>] entry_SYSCALL_64_after_hwframe+0x63/0xcdShow less

In the Linux kernel, the following vulnerability has been resolved: drm/scheduler: fix fence ref counting We leaked dependency fences when processes were beeing killed. Additional to that grab a reference to the last scheduled fence.Show less

In the Linux kernel, the following vulnerability has been resolved: drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker() drm_vblank_init() call drmm_add_action_or_reset() with drm_vblank_init_release() as action. If __drmm_add_action() failed, will directly call drm_vblank_init_release() with the vblank whose worker is NULL. As the resule, a null-ptr-deref will happen in kthread_destroy_worker(). Add the NULL check before calling drm_vblank_destroy_worker(). BUG: null-ptr-deref KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty RIP: 0010:kthread_destroy_worker+0x25/0xb0 Call Trace: <TASK> drm_vblank_init_release+0x124/0x220 [drm] ? drm_crtc_vblank_restore+0x8b0/0x8b0 [drm] __drmm_add_action_or_reset+0x41/0x50 [drm] drm_vblank_init+0x282/0x310 [drm] vkms_init+0x35f/0x1000 [vkms] ? 0xffffffffc4508000 ? lock_is_held_type+0xd7/0x130 ? __kmem_cache_alloc_node+0x1c2/0x2b0 ? lock_is_held_type+0xd7/0x130 ? 0xffffffffc4508000 do_one_initcall+0xd0/0x4f0 ... do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0Show less

In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix error handling in ata_tport_add() In ata_tport_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x39c lr : device_del+0x44/0x39c Call trace: device_del+0x48/0x39c attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tport_delete+0x34/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tport_add().Show less

In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix error handling in ata_tlink_add() In ata_tlink_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x39c lr : device_del+0x44/0x39c Call trace: device_del+0x48/0x39c attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tlink_delete+0x88/0xb0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tlink_add().Show less

In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix error handling in ata_tdev_add() In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev.Show less

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix connections leak when tlink setup failed If the tlink setup failed, lost to put the connections, then the module refcnt leak since the cifsd kthread not exit. Also leak the fscache info, and for next mount with fsc, it will print the follow errors: CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST) Let's check the result of tlink setup, and do some cleanup.Show less

In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible memory leak in mISDN_dsp_element_register() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, use put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the kfree() is removed. list_del() is called in mISDN_dsp_dev_release(), so it need be initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: fix potential memory leak in octep_device_setup() When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mhi: Fix memory leak in mhi_net_dellink() MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix error handling in ena_init() The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak.Show less

In the Linux kernel, the following vulnerability has been resolved: bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0Show less

In the Linux kernel, the following vulnerability has been resolved: drbd: use after free in drbd_create_device() The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free.Show less

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing xas_retry() calls in xarray iteration netfslib has a number of places in which it performs iteration of an xarray whilst being under the RCU read lock. It *should* call xas_retry() as the first thing inside of the loop and do "continue" if it returns true in case the xarray walker passed out a special value indicating that the walk needs to be redone from the root[*]. Fix this by adding the missing retry checks. [*] I wonder if this should be done inside xas_find(), xas_next_node() and suchlike, but I'm told that's not an simple change to effect. This can cause an oops like that below. Note the faulting address - this is an internal value (|0x2) returned from xarray. BUG: kernel NULL pointer dereference, address: 0000000000000402 ... RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs] ... Call Trace: netfs_rreq_assess+0xa6/0x240 [netfs] netfs_readpage+0x173/0x3b0 [netfs] ? init_wait_var_entry+0x50/0x50 filemap_read_page+0x33/0xf0 filemap_get_pages+0x2f2/0x3f0 filemap_read+0xaa/0x320 ? do_filp_open+0xb2/0x150 ? rmqueue+0x3be/0xe10 ceph_read_iter+0x1fe/0x680 [ceph] ? new_sync_read+0x115/0x1a0 new_sync_read+0x115/0x1a0 vfs_read+0xf3/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Changes: ======== ver #2) - Changed an unsigned int to a size_t to reduce the likelihood of an overflow as per Willy's suggestion. - Added an additional patch to fix the maths.Show less

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a memory leak in nvmet_auth_set_key When changing dhchap secrets we need to release the old secrets as well. kmemleak complaint: -- unreferenced object 0xffff8c7f44ed8180 (size 64): comm "check", pid 7304, jiffies 4295686133 (age 72034.246s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71 DHHC-1:00:LdLOdq 79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38 yVigwHU2mZYLz5Y8 backtrace: [<00000000b6fc5071>] kstrdup+0x2e/0x60 [<00000000f0f4633f>] 0xffffffffc0e07ee6 [<0000000053006c05>] 0xffffffffc0dff783 [<00000000419ae922>] configfs_write_iter+0xb1/0x120 [<000000008183c424>] vfs_write+0x2be/0x3c0 [<000000009005a2a5>] ksys_write+0x5f/0xe0 [<00000000cd495c89>] do_syscall_64+0x38/0x90 [<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcdShow less

In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().Show less