Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? pr ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.Show less

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom-adm: fix wrong sizeof config in slave_config Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will not be freed through rpi_firmware_delete(), fix this leak by calling kfree() in the error path.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null-deref in dm_resume [Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix size validation for non-exclusive domains (v4) Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the requested memory exists, else we get a kernel oops when dereferencing "man". v2: Make the patch standalone, i.e. not dependent on local patches. v3: Preserve old behaviour and just check that the manager pointer is not NULL. v4: Complain if GTT domain requested and it is uninitialized--most likely a bug.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]() The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method() is not freed after the call, so it leads to memory leak. The method results in ACPI buffer is not used, so just pass NULL to wmi_evaluate_method() which fixes the memory leak.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios() As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue() If construction of the array of work queues to handle hpd_rx_irq offload work fails, we need to unwind. Destroy all the created workqueues and the allocated memory for the hpd_rx_irq_offload_work_queue struct array.Show less

In the Linux kernel, the following vulnerability has been resolved: lib/fonts: fix undefined behavior in bit shift for get_default_font Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20 left shift of 1 by 31 places cannot be represented in type 'int' <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c get_default_font+0x1c7/0x1f0 fbcon_startup+0x347/0x3a0 do_take_over_console+0xce/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() arm_smmu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak")Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix pci device refcount leak in ppr_notifier() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it before returning from ppr_notifier() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: avoid scheduling in rtas_os_term() It's unsafe to use rtas_busy_delay() to handle a busy status from the ibm,os-term RTAS function in rtas_os_term(): Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:618 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 CPU: 7 PID: 1 Comm: swapper/0 Tainted: G D 6.0.0-rc5-02182-gf8553a572277-dirty #9 Call Trace: [c000000007b8f000] [c000000001337110] dump_stack_lvl+0xb4/0x110 (unreliable) [c000000007b8f040] [c0000000002440e4] __might_resched+0x394/0x3c0 [c000000007b8f0e0] [c00000000004f680] rtas_busy_delay+0x120/0x1b0 [c000000007b8f100] [c000000000052d04] rtas_os_term+0xb8/0xf4 [c000000007b8f180] [c0000000001150fc] pseries_panic+0x50/0x68 [c000000007b8f1f0] [c000000000036354] ppc_panic_platform_handler+0x34/0x50 [c000000007b8f210] [c0000000002303c4] notifier_call_chain+0xd4/0x1c0 [c000000007b8f2b0] [c0000000002306cc] atomic_notifier_call_chain+0xac/0x1c0 [c000000007b8f2f0] [c0000000001d62b8] panic+0x228/0x4d0 [c000000007b8f390] [c0000000001e573c] do_exit+0x140c/0x1420 [c000000007b8f480] [c0000000001e586c] make_task_dead+0xdc/0x200 Use rtas_busy_delay_time() instead, which signals without side effects whether to attempt the ibm,os-term RTAS call again.Show less

In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80Show less

In the Linux kernel, the following vulnerability has been resolved: eth: alx: take rtnl_lock on resume Zbynek reports that alx trips an rtnl assertion on resume: RTNL: assertion failed at net/core/dev.c (2891) RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0 Call Trace: <TASK> __alx_open+0x230/0x570 [alx] alx_resume+0x54/0x80 [alx] ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x4a/0x150 device_resume+0x8b/0x190 async_resume+0x19/0x30 async_run_entry_fn+0x30/0x130 process_one_work+0x1e5/0x3b0 indeed the driver does not hold rtnl_lock during its internal close and re-open functions during suspend/resume. Note that this is not a huge bug as the driver implements its own locking, and does not implement changing the number of queues, but we need to silence the splat.Show less

In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: fix shift-out-of-bounds in check_special_flags UBSAN reported a shift-out-of-bounds warning: left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 ubsan_epilogue+0xa/0x44 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322 check_special_flags fs/binfmt_misc.c:241 [inline] create_entry fs/binfmt_misc.c:456 [inline] bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654 vfs_write+0x11e/0x580 fs/read_write.c:582 ksys_write+0xcf/0x120 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4194e1 Since the type of Node's flags is unsigned long, we should define these macros with same type too.Show less

In the Linux kernel, the following vulnerability has been resolved: thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. [ rjw: Subject edits ]Show less

In the Linux kernel, the following vulnerability has been resolved: drm/mipi-dsi: Detach devices when removing the host Whenever the MIPI-DSI host is unregistered, the code of mipi_dsi_host_unregister() loops over every device currently found on that bus and will unregister it. However, it doesn't detach it from the bus first, which leads to all kind of resource leaks if the host wants to perform some clean up whenever a device is detached.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clean up si_domain in the init_dmars() error path A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path.Show less

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.Show less

In the Linux kernel, the following vulnerability has been resolved: rtc: class: Fix potential memleak in devm_rtc_allocate_device() devm_rtc_allocate_device() will alloc a rtc_device first, and then run dev_set_name(). If dev_set_name() failed, the rtc_device will memleak. Move devm_add_action_or_reset() in front of dev_set_name() to prevent memleak. unreferenced object 0xffff888110a53000 (size 2048): comm "python3", pid 470, jiffies 4296078308 (age 58.882s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0...... 08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0.............. backtrace: [<000000004aac0364>] kmalloc_trace+0x21/0x110 [<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400 [<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80 [<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581] [<00000000f0eba0ae>] spi_probe+0xde/0x130 [<00000000bff89ee8>] really_probe+0x175/0x3f0 [<00000000128e8d84>] __driver_probe_device+0xe6/0x170 [<00000000ee5bf913>] device_driver_attach+0x32/0x80 [<00000000f3f28f92>] bind_store+0x10b/0x1a0 [<000000009ff812d8>] drv_attr_store+0x49/0x70 [<000000008139c323>] sysfs_kf_write+0x8d/0xb0 [<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0 [<00000000ecbe3895>] vfs_write+0x61a/0x7d0 [<00000000aa2196ea>] ksys_write+0xc8/0x190 [<0000000046a600f5>] do_syscall_64+0x37/0x90 [<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcdShow less