Vulnerabilities (CVE)

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Add check for get_zeroed_page() Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job.Show less

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init Move the get_ctx(child_ctx) call and the child_event->ctx assignment to occur immediately after the child event is allocated. Ensure that child_event->ctx is non-NULL before any subsequent error path within inherit_event calls free_event(), satisfying the assumptions of the cleanup code. Details: There's no clear Fixes tag, because this bug is a side-effect of multiple interacting commits over time (up to 15 years old), not a single regression. The code initially incremented refcount then assigned context immediately after the child_event was created. Later, an early validity check for child_event was added before the refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was added, assuming event->ctx is valid if the pmu_ctx is valid. The problem is that the WARN_ON_ONCE() could trigger after the initial check passed but before child_event->ctx was assigned, violating its precondition. The solution is to assign child_event->ctx right after its initial validation. This ensures the context exists for any subsequent checks or cleanup routines, resolving the WARN_ON_ONCE(). To resolve it, defer the refcount update and child_event->ctx assignment directly after child_event->pmu_ctx is set but before checking if the parent event is orphaned. The cleanup routine depends on event->pmu_ctx being non-NULL before it verifies event->ctx is non-NULL. This also maintains the author's original intent of passing in child_ctx to find_get_pmu_context before its refcount/assignment. [ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]Show less

In the Linux kernel, the following vulnerability has been resolved: iommu: Clear iommu-dma ops on cleanup If iommu_device_register() encounters an error, it can end up tearing down already-configured groups and default domains, however this currently still leaves devices hooked up to iommu-dma (and even historically the behaviour in this area was at best inconsistent across architectures/drivers...) Although in the case that an IOMMU is present whose driver has failed to probe, users cannot necessarily expect DMA to work anyway, it's still arguable that we should do our best to put things back as if the IOMMU driver was never there at all, and certainly the potential for crashing in iommu-dma itself is undesirable. Make sure we clean up the dev->dma_iommu flag along with everything else.Show less

In the Linux kernel, the following vulnerability has been resolved: igc: fix PTM cycle trigger logic Writing to clear the PTM status 'valid' bit while the PTM cycle is triggered results in unreliable PTM operation. To fix this, clear the PTM 'trigger' and status after each PTM transaction. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails This patch also fixes a hang in igc_probe() when loading the igc driver in the kdump kernel on systems supporting PTM. The igc driver running in the base kernel enables PTM trigger in igc_probe(). Therefore the driver is always in PTM trigger mode, except in brief periods when manually triggering a PTM cycle. When a crash occurs, the NIC is reset while PTM trigger is enabled. Due to a hardware problem, the NIC is subsequently in a bad busmaster state and doesn't handle register reads/writes. When running igc_probe() in the kdump kernel, the first register access to a NIC register hangs driver probing and ultimately breaks kdump. With this patch, igc has PTM trigger disabled most of the time, and the trigger is only enabled for very brief (10 - 100 us) periods when manually triggering a PTM cycle. Chances that a crash occurs during a PTM trigger are not 0, but extremely reduced.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Silence oversized kvmalloc() warning syzkaller triggered an oversized kvmalloc() warning. Silence it by adding __GFP_NOWARN. syzkaller log: WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_umem_odp_get+0x1f6/0x390 mlx5_ib_reg_user_mr+0x1e8/0x450 ib_uverbs_reg_mr+0x28b/0x440 ib_uverbs_write+0x7d3/0xa30 vfs_write+0x1ac/0x6c0 ksys_write+0x134/0x170 ? __sanitizer_cov_trace_pc+0x1c/0x50 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7eShow less

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix null pointer dereference in pidff_find_fields This function triggered a null pointer dereference if used to search for a report that isn't implemented on the device. This happened both for optional and required reports alike. The same logic was applied to pidff_find_special_field and although pidff_init_fields should return an error earlier if one of the required reports is missing, future modifications could change this logic and resurface this possible null pointer dereference again. LKML bug report: https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.comShow less

In the Linux kernel, the following vulnerability has been resolved: page_pool: avoid infinite loop to schedule delayed worker We noticed the kworker in page_pool_release_retry() was waken up repeatedly and infinitely in production because of the buggy driver causing the inflight less than 0 and warning us in page_pool_inflight()[1]. Since the inflight value goes negative, it means we should not expect the whole page_pool to get back to work normally. This patch mitigates the adverse effect by not rescheduling the kworker when detecting the inflight negative in page_pool_release_retry(). [1] [Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------ [Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages ... [Mon Feb 10 20:36:11 2025] Call Trace: [Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70 [Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370 [Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0 [Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140 [Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370 [Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40 [Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40 [Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]--- Note: before this patch, the above calltrace would flood the dmesg due to repeated reschedule of release_dw kworker.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix PM related deadlocks in MS IOCTLs Prevent runtime resume/suspend while MS IOCTLs are in progress. Failed suspend will call ivpu_ms_cleanup() that would try to acquire file_priv->ms_lock, which is already held by the IOCTLs.Show less

In the Linux kernel, the following vulnerability has been resolved: arm64: mops: Do not dereference src reg for a set operation The source register is not used for SET* and reading it can result in a UBSAN out-of-bounds array access error, specifically when the MOPS exception is taken from a SET* sequence with XZR (reg 31) as the source. Architecturally this is the only case where a src/dst/size field in the ESR can be reported as 31. Prior to 2de451a329cf662b the code in do_el0_mops() was benign as the use of pt_regs_read_reg() prevented the out-of-bounds access.Show less

In the Linux kernel, the following vulnerability has been resolved: cifs: avoid NULL pointer dereference in dbg call cifs_server_dbg() implies server to be non-NULL so move call under condition to avoid NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: PCI: pciehp: Avoid unnecessary device replacement check Hot-removal of nested PCI hotplug ports suffers from a long-standing race condition which can lead to a deadlock: A parent hotplug port acquires pci_lock_rescan_remove(), then waits for pciehp to unbind from a child hotplug port. Meanwhile that child hotplug port tries to acquire pci_lock_rescan_remove() as well in order to remove its own children. The deadlock only occurs if the parent acquires pci_lock_rescan_remove() first, not if the child happens to acquire it first. Several workarounds to avoid the issue have been proposed and discarded over the years, e.g.: https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/ A proper fix is being worked on, but needs more time as it is nontrivial and necessarily intrusive. Recent commit 9d573d19547b ("PCI: pciehp: Detect device replacement during system sleep") provokes more frequent occurrence of the deadlock when removing more than one Thunderbolt device during system sleep. The commit sought to detect device replacement, but also triggered on device removal. Differentiating reliably between replacement and removal is impossible because pci_get_dsn() returns 0 both if the device was removed, as well as if it was replaced with one lacking a Device Serial Number. Avoid the more frequent occurrence of the deadlock by checking whether the hotplug port itself was hot-removed. If so, there's no sense in checking whether its child device was replaced. This works because the ->resume_noirq() callback is invoked in top-down order for the entire hierarchy: A parent hotplug port detecting device replacement (or removal) marks all children as removed using pci_dev_set_disconnected() and a child hotplug port can then reliably detect being removed.Show less

In the Linux kernel, the following vulnerability has been resolved: spi: fsl-qspi: use devm function instead of driver remove Driver use devm APIs to manage clk/irq/resources and register the spi controller, but the legacy remove function will be called first during device detach and trigger kernel panic. Drop the remove function and use devm_add_action_or_reset() for driver cleanup to ensure the release sequence. Trigger kernel panic on i.MX8MQ by echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbindShow less

In the Linux kernel, the following vulnerability has been resolved: jbd2: remove wrong sb->s_sequence check Journal emptiness is not determined by sb->s_sequence == 0 but rather by sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a valid transaction ID so the check can spuriously trigger. Remove the invalid WARN_ON.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that.Show less

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reference leak in pci_register_host_bridge() If device_register() fails, call put_device() to give up the reference to avoid a memory leak, per the comment at device_register(). Found by code review. [bhelgaas: squash Dan Carpenter's double free fix from https://lore.kernel.org/r/db806a6c-a91b-4e5a-a84b-6b7e01bdac85@stanley.mountain]Show less

In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: don't try to reclaim hwpoison folio Syzkaller reports a bug as follows: Injecting memory failure for pfn 0x18b00e at process virtual address 0x20ffd000 Memory failure: 0x18b00e: dirty swapcache page still referenced by 2 users Memory failure: 0x18b00e: recovery action for dirty swapcache page: Failed page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x20ffd pfn:0x18b00e memcg:ffff0000dd6d9000 anon flags: 0x5ffffe00482011(locked|dirty|arch_1|swapbacked|hwpoison|node=0|zone=2|lastcpupid=0xfffff) raw: 005ffffe00482011 dead000000000100 dead000000000122 ffff0000e232a7c9 raw: 0000000000020ffd 0000000000000000 00000002ffffffff ffff0000dd6d9000 page dumped because: VM_BUG_ON_FOLIO(!folio_test_uptodate(folio)) ------------[ cut here ]------------ kernel BUG at mm/swap_state.c:184! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 0 PID: 60 Comm: kswapd0 Not tainted 6.6.0-gcb097e7de84e #3 Hardware name: linux,dummy-virt (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : add_to_swap+0xbc/0x158 lr : add_to_swap+0xbc/0x158 sp : ffff800087f37340 x29: ffff800087f37340 x28: fffffc00052c0380 x27: ffff800087f37780 x26: ffff800087f37490 x25: ffff800087f37c78 x24: ffff800087f377a0 x23: ffff800087f37c50 x22: 0000000000000000 x21: fffffc00052c03b4 x20: 0000000000000000 x19: fffffc00052c0380 x18: 0000000000000000 x17: 296f696c6f662865 x16: 7461646f7470755f x15: 747365745f6f696c x14: 6f6621284f494c4f x13: 0000000000000001 x12: ffff600036d8b97b x11: 1fffe00036d8b97a x10: ffff600036d8b97a x9 : dfff800000000000 x8 : 00009fffc9274686 x7 : ffff0001b6c5cbd3 x6 : 0000000000000001 x5 : ffff0000c25896c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff0000c25896c0 x0 : 0000000000000000 Call trace: add_to_swap+0xbc/0x158 shrink_folio_list+0x12ac/0x2648 shrink_inactive_list+0x318/0x948 shrink_lruvec+0x450/0x720 shrink_node_memcgs+0x280/0x4a8 shrink_node+0x128/0x978 balance_pgdat+0x4f0/0xb20 kswapd+0x228/0x438 kthread+0x214/0x230 ret_from_fork+0x10/0x20 I can reproduce this issue with the following steps: 1) When a dirty swapcache page is isolated by reclaim process and the page isn't locked, inject memory failure for the page. me_swapcache_dirty() clears uptodate flag and tries to delete from lru, but fails. Reclaim process will put the hwpoisoned page back to lru. 2) The process that maps the hwpoisoned page exits, the page is deleted the page will never be freed and will be in the lru forever. 3) If we trigger a reclaim again and tries to reclaim the page, add_to_swap() will trigger VM_BUG_ON_FOLIO due to the uptodate flag is cleared. To fix it, skip the hwpoisoned page in shrink_folio_list(). Besides, the hwpoison folio may not be unmapped by hwpoison_user_mappings() yet, unmap it in shrink_folio_list(), otherwise the folio will fail to be unmaped by hwpoison_user_mappings() since the folio isn't in lru list.Show less

In the Linux kernel, the following vulnerability has been resolved: cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference. Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: fix usbmisc handling usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: typec: class: Fix NULL pointer access Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer dereference. This patch adds a mutex to protect USB device pointers and prevent this issue. The same mutex protects both the device pointers and the partner device registration.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: null - Use spin lock instead of mutex As the null algorithm may be freed in softirq context through af_alg, use spin locks instead of mutexes to protect the default null algorithm.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Purge vif txq in ieee80211_do_stop() After ieee80211_do_stop() SKB from vif's txq could still be processed. Indeed another concurrent vif schedule_and_wake_txq call could cause those packets to be dequeued (see ieee80211_handle_wake_tx_queue()) without checking the sdata current state. Because vif.drv_priv is now cleared in this function, this could lead to driver crash. For example in ath12k, ahvif is store in vif.drv_priv. Thus if ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to trigger the NULL deref below. Unable to handle kernel paging request at virtual address dfffffc000000001 KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] batman_adv: bat0: Interface deactivated: brbh1337 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000001] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114 Hardware name: HW (DT) pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k] sp : ffffffc086ace450 x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4 x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0 x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958 x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8 x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03 x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40 x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0 x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008 Call trace: ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P) ieee80211_handle_wake_tx_queue+0x16c/0x260 ieee80211_queue_skb+0xeec/0x1d20 ieee80211_tx+0x200/0x2c8 ieee80211_xmit+0x22c/0x338 __ieee80211_subif_start_xmit+0x7e8/0xc60 ieee80211_subif_start_xmit+0xc4/0xee0 __ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0 ieee80211_subif_start_xmit_8023+0x124/0x488 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 br_dev_queue_push_xmit+0x120/0x4a8 __br_forward+0xe4/0x2b0 deliver_clone+0x5c/0xd0 br_flood+0x398/0x580 br_dev_xmit+0x454/0x9f8 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 ip6_finish_output2+0xc28/0x1b60 __ip6_finish_output+0x38c/0x638 ip6_output+0x1b4/0x338 ip6_local_out+0x7c/0xa8 ip6_send_skb+0x7c/0x1b0 ip6_push_pending_frames+0x94/0xd0 rawv6_sendmsg+0x1a98/0x2898 inet_sendmsg+0x94/0xe0 __sys_sendto+0x1e4/0x308 __arm64_sys_sendto+0xc4/0x140 do_el0_svc+0x110/0x280 el0_svc+0x20/0x60 el0t_64_sync_handler+0x104/0x138 el0t_64_sync+0x154/0x158 To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could be dequeued after ieee80211_do_stop() (new packets cannot be queued because SDATA_STATE_RUNNING is cleared at this point).Show less