Vulnerabilities (CVE)

MIME::Field::ParamVal versions before 5.521 for Perl allow one invalid Content-Type parameter to hide the parameters after it, including the multipart boundary. Parameter parsing stops at the first parameter whose name it cannot read, such as x:y=1 or a name containing an 8-bit byte, and drops every parameter after it. When the boundary is among them, MIME::Parser keeps the multipart body as a single undecoded part without marking the parse as ambiguous. Mail readers that skip the invalid parameter still find the boundary. A remote sender can hide an attachment from a filter that relies on ambiguous_content() while the recipient's mail client shows it.Show less

HTTP::Body versions before 1.23_01 for Perl drop mixed-case percent escapes from urlencoded form fields instead of decoding them. The decode table holds only the all-lowercase and all-uppercase spelling of each hex pair, while the escape pattern matches either case. An escape such as %aB finds no entry and is replaced with nothing, joining the bytes on either side. Hex digits in percent escapes are case-insensitive, and conforming decoders return the byte. A remote attacker can send a field name or value that a conforming decoder in front of the application reads differently, so that pass%aBword reaches the application as password.Show less

HTTP::Body versions before 1.23_01 for Perl allow memory exhaustion via an unbounded multipart part header block. The multipart parser takes everything up to the first blank line after a boundary as the part's header block, with no limit on its size or number of lines. Every line is stored in the part's header hash, so a block of short lines costs about 60 bytes of memory per input byte. A remote attacker can exhaust worker memory with a single request.Show less

GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. From 10.10.1 until 12.0.2, the @graphql-tools/utils mergeIncrementalResult helper passes incrementalResult.path segments to setObjectKeyPath without runtime primitive-type validation. A non-primitive segment can bypass strict comparisons against __proto__, constructor, and prototype, then be coerced during property access so a malicious or compromised upstream incremental GraphQL response writes attacker-controlled properties to Object.prototype in the consuming Node.js process. The affected implementation is packages/utils/src/mergeIncrementalResult.ts and is reachable when consumers merge untrusted @defer or @stream transport results. This issue is fixed in version 12.0.2.Show less

Black is the uncompromising Python code formatter. Prior to 26.10.1, the Black GitHub Action with use_pyproject: true accepts tool.black.required-version from pyproject.toml without validating that it is a released Black version specifier. An attacker who can submit a pull request can change that field to a direct reference to attacker-controlled code, causing the workflow to install and execute the code in the victim repository's GitHub Actions context. This issue is fixed in version 26.10.1.Show less

Pillow is a Python imaging library. In versions through 12.3.0, the libtiff TIFF encoder can pass arguments to  TIFFSetField()  that do not match libtiff’s definition of the corresponding tag. When an application saves attacker-controlled image metadata through this encoder, crafted tag values can cause invalid memory reads, copying process memory into the encoded output or crashing the process. Applications that return the encoded output to an attacker can disclose that memory. The issue is reachable when re-saving compressed TIFF images and through certain conversions that preserve EXIF metadata into compressed TIFF output. This vulnerability is fixed in version 13.0.0.Show less

Pillow is a Python imaging library. In versions 2.3.0 through 12.3.0, EPS rendering does not validate the scaled image dimensions before invoking Ghostscript. Applications that process untrusted EPS or PostScript files using an application-selected scale greater than one can incur excessive Ghostscript CPU and temporary disk consumption. In versions with decompression-bomb protection, the scaled output is checked only after Ghostscript has completed rendering, allowing resource consumption beyond the configured pixel limit. The amplification depends on the scale selected by the application, not an attacker-controlled scale value. This issue is fixed in version 13.0.0.Show less

Initialization of a resource with an insecure default vulnerability in OpenText Advanced Authentication Server allows Excessive Allocation. This issue affects Advanced Authentication Server: from 6.4.0.0 through 6.4.3.x, from 6.5.0.0 through 6.5.0.x, and from 6.6.0.0 through 6.6.1.0. The fix for this is issue is to create a secure configuration.  The 6.6.2.0 release has a best practice entry if the configuration is unsecure. A secure configuration is to NOT allow creation/recreation of Unauthenticated Endpoints.  If creation/recreation of Unauthenticated Endpoints is required, you should only allow it from trusted networks.   To remedy this issue, change your configuration to NOT allow creation/recreation of Unauthenticated Endpoints. If you require Unauthenticated Endpoints, you MUST change your configuration to use a non-empty whitelist to specify the trusted networks.  An empty whitelist will allow all networks to create/recreate endpoints.Show less

The Model Context Protocol TypeScript SDK provides TypeScript client and server implementations of the Model Context Protocol. From 1.6.0 until 1.32.0 in @modelcontextprotocol/sdk, from 2.0.0 until 2.3.0 in @modelcontextprotocol/server, from 2.0.0 until 2.0.2 in @modelcontextprotocol/express, and from 2.0.0 until 2.3.1 in @modelcontextprotocol/server-legacy, server-side bearer authentication could accept a valid access token issued for a different service because the SDK did not enforce the token audience. The affected surface is server-side HTTP bearer authentication. The trigger is a valid token whose audience names another service. The authorization server must issue tokens for multiple services, and the application's verifyAccessToken() must not independently validate aud. Applications already validating aud inside verifyAccessToken() are not affected. An attacker with a token for another service could authenticate to the MCP server and obtain the confidentiality and integrity capabilities granted to an authenticated caller. Upgrading alone leaves the new audience validation disabled. Operators must enable audience validation and provide the token audience together. Enabling only the expected audience check causes every request to receive HTTP 401. This issue is fixed in @modelcontextprotocol/sdk 1.32.0, @modelcontextprotocol/server 2.3.0, @modelcontextprotocol/express 2.0.2, and @modelcontextprotocol/server-legacy 2.3.1.Show less

Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.34 and 21.0.3, the @angular/common HttpClient function xsrfInterceptorFn uses a regular expression that does not normalize request URLs in the same way as the browser's WHATWG URL parser. With XSRF protection enabled, a mutating HTTP request to an attacker-controlled URL containing backslashes, stripped control characters or spaces, or removable ASCII whitespace can be misclassified as relative and same-origin, causing the interceptor to attach the X-XSRF-TOKEN header before the browser dispatches the request to a cross-origin host. With permissive CORS handling for the custom header, the attacker can obtain the victim's XSRF token and use it to perform cross-site request forgery against the victim session. This issue is fixed in versions 20.3.34 and 21.0.3.Show less

Codex Desktop for Windows does not correctly check quotation marks in project paths from Windows Explorer. If a user selects "Open project in ChatGPT" for an attacker-controlled library's child item, the path can add application startup arguments. These arguments can run attacker-controlled code with the current Windows user's permissions before sign-in or project trust approval.Show less

Altair is a GraphQL client for all platforms. From 7.2.4 until 8.5.8, packages/altair-iframe-sandbox/src/main.ts reads plugin_sandbox_opts from the iframe-sandbox query string and passes attacker-controlled scriptUrls to injectScript() in packages/altair-core/src/utils/inject.ts, which creates script elements in the page. The intended parent iframe flow places the page in an iframe with sandbox allow-scripts and without allow-same-origin, but direct navigation to a crafted iframe-sandbox URL omits that isolation and executes the supplied script in the origin serving Altair. Exploitation requires a victim to open the crafted URL, and the resulting script can access script-readable storage and make same-origin requests according to the deployment's authentication and cookie controls. This issue is fixed in version 8.5.8.Show less

The Redux Framework plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'multi_media' Field Array Key in all versions due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The wp_kses_post sanitization applied at save time operates only on array leaf values, leaving array keys entirely unsanitized; the injected key is then rendered directly into an id="filelist-<KEY>" HTML attribute without esc_attr() in Redux_Multi_Media::render(), allowing attribute breakout.Show less

Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6.Show less

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to 7.15.2 and 8.10.2, V8 API relationship write paths do not consistently enforce object-level edit and view authorization on both related records. In the verified Account-to-Contact case, an authenticated user can create a relationship while unable to edit the Account and can delete relationship links to a hidden Contact that cannot be viewed directly. This issue is fixed in versions 7.15.2 and 8.10.2.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix kernel crash when hard resetting the GPU The GPU hard reset sequence calls pm_runtime_force_suspend() and pm_runtime_force_resume(), which according to their documentation should only be used during system-wide PM transitions to sleep states. The main issue though is that depending on some internal runtime PM state as seen by pm_runtime_force_suspend() (whether the usage count is <= 1), pm_runtime_force_resume() might not resume the device unless needed. If that happens, the runtime PM resume callback pvr_power_device_resume() is not called, the GPU clocks are not re-enabled, and the kernel crashes on the next attempt to access GPU registers as part of the power-on sequence. Replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to the driver's runtime PM callbacks, pvr_power_device_suspend() and pvr_power_device_resume(), to ensure clocks are re-enabled and avoid the kernel crash.Show less

In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: msm: mark certain pins as invalid for interrupts On some platforms, the UFS-reset pin has no interrupt logic in TLMM but is nevertheless registered as a GPIO in the kernel. This enables the user-space to trigger a BUG() in the pinctrl-msm driver by running, for example: `gpiomon -c 0 113` on RB2. The exact culprit is requesting pins whose intr_detection_width setting is not 1 or 2 for interrupts. This hits a BUG() in msm_gpio_irq_set_type(). Potentially crashing the kernel due to an invalid request from user-space is not optimal, so let's go through the pins and mark those that would fail the check as invalid for the irq chip as we should not even register them as available irqs. This function can be extended if we determine that there are more corner-cases like this.Show less

In the Linux kernel, the following vulnerability has been resolved: kasan: remove kasan_find_vm_area() to prevent possible deadlock find_vm_area() couldn't be called in atomic_context. If find_vm_area() is called to reports vm area information, kasan can trigger deadlock like: CPU0 CPU1 vmalloc(); alloc_vmap_area(); spin_lock(&vn->busy.lock) spin_lock_bh(&some_lock); <interrupt occurs> <in softirq> spin_lock(&some_lock); <access invalid address> kasan_report(); print_report(); print_address_description(); kasan_find_vm_area(); find_vm_area(); spin_lock(&vn->busy.lock) // deadlock! To prevent possible deadlock while kasan reports, remove kasan_find_vm_area().Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject VHT opmode for unsupported channel widths VHT operating mode notifications are not defined for channel widths below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the VHT specification and must be rejected. Without this check, malformed notifications using these widths may reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to invalid input. This issue was reported by syzbot. Reject these unsupported widths early in sta_link_apply_parameters() when opmode_notif is used. The accepted set includes 20, 40, 80, 160, and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined for VHT, it is allowed to avoid rejecting HE or EHT clients that may still send a VHT opmode notification.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has accidentally removed the critical piece of commit c730fce7c70c ("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing intermittent kernel panics in e.g. perf's on_switch() prog to reappear. Restore the fix and add a comment.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree htb_lookup_leaf has a BUG_ON that can trigger with the following: tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 64bit tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2:1 handle 3: blackhole ping -I lo -c1 -W0.001 127.0.0.1 The root cause is the following: 1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on the selected leaf qdisc 2. netem_dequeue calls enqueue on the child qdisc 3. blackhole_enqueue drops the packet and returns a value that is not just NET_XMIT_SUCCESS 4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate -> htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase 5. As this is the only class in the selected hprio rbtree, __rb_change_child in __rb_erase_augmented sets the rb_root pointer to NULL 6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL, which causes htb_dequeue_tree to call htb_lookup_leaf with the same hprio rbtree, and fail the BUG_ON The function graph for this scenario is shown here: 0) | htb_enqueue() { 0) + 13.635 us | netem_enqueue(); 0) 4.719 us | htb_activate_prios(); 0) # 2249.199 us | } 0) | htb_dequeue() { 0) 2.355 us | htb_lookup_leaf(); 0) | netem_dequeue() { 0) + 11.061 us | blackhole_enqueue(); 0) | qdisc_tree_reduce_backlog() { 0) | qdisc_lookup_rcu() { 0) 1.873 us | qdisc_match_from_root(); 0) 6.292 us | } 0) 1.894 us | htb_search(); 0) | htb_qlen_notify() { 0) 2.655 us | htb_deactivate_prios(); 0) 6.933 us | } 0) + 25.227 us | } 0) 1.983 us | blackhole_dequeue(); 0) + 86.553 us | } 0) # 2932.761 us | qdisc_warn_nonwc(); 0) | htb_lookup_leaf() { 0) | BUG_ON(); ------------------------------------------ The full original bug report can be seen here [1]. We can fix this just by returning NULL instead of the BUG_ON, as htb_dequeue_tree returns NULL when htb_lookup_leaf returns NULL. [1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/Show less

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576Show less

In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_{g2h,h2g} TOCTOU vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload. transport_{g2h,h2g} may become NULL after the NULL check. Introduce vsock_transport_local_cid() to protect from a potential null-ptr-deref. KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_find_cid+0x47/0x90 Call Trace: __vsock_bind+0x4b2/0x720 vsock_bind+0x90/0xe0 __sys_bind+0x14d/0x1e0 __x64_sys_bind+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0 Call Trace: __x64_sys_ioctl+0x12d/0x190 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Show less

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fShow less

In the Linux kernel, the following vulnerability has been resolved: net/sched: Abort __tc_modify_qdisc if parent class does not exist Lion's patch [1] revealed an ancient bug in the qdisc API. Whenever a user creates/modifies a qdisc specifying as a parent another qdisc, the qdisc API will, during grafting, detect that the user is not trying to attach to a class and reject. However grafting is performed after qdisc_create (and thus the qdiscs' init callback) is executed. In qdiscs that eventually call qdisc_tree_reduce_backlog during init or change (such as fq, hhf, choke, etc), an issue arises. For example, executing the following commands: sudo tc qdisc add dev lo root handle a: htb default 2 sudo tc qdisc add dev lo parent a: handle beef fq Qdiscs such as fq, hhf, choke, etc unconditionally invoke qdisc_tree_reduce_backlog() in their control path init() or change() which then causes a failure to find the child class; however, that does not stop the unconditional invocation of the assumed child qdisc's qlen_notify with a null class. All these qdiscs make the assumption that class is non-null. The solution is ensure that qdisc_leaf() which looks up the parent class, and is invoked prior to qdisc_create(), should return failure on not finding the class. In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the parentid doesn't correspond to a class, so that we can detect it earlier on and abort before qdisc_create is called. [1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/Show less